journal article·2020-02

Experimental investigation of modified bentonite clay-crumb rubber concrete

Adeyemi Oluwaseun Adeboje, Williams Kehinde Kupolati, Emmanuel Rotimi Sadiku, Julius Musyoka Ndambuki, Chewe Kambole

Publisher page

Abstract

Abstract This study was carried out to investigate the effects of jointly replacing cement and sand with bentonite clay and crumb rubber on the engineering properties of 25 MPa concrete. The materials used for the study were cement, bentonite clay, sand, crumb rubber, stone and water. Microstructural formation, elemental compositions and crystalline phases of cement, bentonite clay, sand, crumb rubber and stone were determined by using Scanning Electron Microscopy (SEM), Energy Dispersive X-ray Spectroscopy (EDS) and X-ray Diffraction (XRD) experiments respectively. Geotechnical properties of fine aggregates (sand and crumb rubber) and coarse aggregate (stone) were determined from sieve analysis, fineness modulus, moisture content, apparent relative density and bulk density experiments. Water samples were evaluated with pH and conductivity tests. Mechanical properties of the modified bentonite clay-crumb rubber concrete were evaluated with slump, bulk density, compressive strength and tensile splitting strength tests. The microstructural formation and elemental composition of the concrete were also evaluated with the aid of SEM and EDS respectively. The results revealed that the constituent materials possessed adequate engineering requirements for the production of concrete. The modified bentonite clay-crumb rubber concrete showed comparable mechanical and microstructural properties to that of plain concrete and can be suitable for the construction of driveways, floors and walkways.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Recycled Aggregate Concrete Performance

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (83)

Show source-provided references
1. A Situational analysis of waste management in harare, Zimbabwe
2. Study on waste tyre rubber as concrete aggregates
3. Treatment and disposal of tyres: two EU approaches, a review10.1016/j.wasman.2015.04.018 ↗
4. Industrial upgrading through foreign direct investment in Central European automotive manufacturing10.1177/0969776408098932 ↗
5. Elom · 2012
6. An extension of MACBETH method for a fuzzy environment to analyze alternatives in reverse logistics for automobile tire wastes10.1016/j.omega.2013.02.003 ↗
7. Properties and durability of concrete containing polymeric wastes (tyre rubber and polyethylene terephthalate bottles): an overview10.1016/j.conbuildmat.2011.11.047 ↗
8. Trends and developments in green cement and concrete technology10.1016/j.ijsbe.2013.05.001 ↗
9. Performance of high strength rubberized concrete in aggressive environment10.1016/j.conbuildmat.2015.03.012 ↗
10. Properties and durability of HPC with tyre rubber wastes10.1016/j.conbuildmat.2012.02.062 ↗
11. Mechanical properties and constitutive equations of concrete containing a low volume of tire rubber particles10.1016/j.conbuildmat.2014.07.105 ↗
12. Clays, nanoclays, and montmorillonite minerals10.1007/s11661-008-9603-5 ↗
13. A review on the adsorption of heavy metals by clay minerals, with special focus on the past decade10.1016/j.cej.2016.09.029 ↗
14. Z. Adamis, R.B. Williams, Bentonite, kaolin and selected clay minerals, 2005.
15. Pelletized fly ash lightweight aggregate concrete: a promising material10.5897/JBD11.088 ↗
16. Geopolymer foam concrete: an emerging material for sustainable construction10.1016/j.conbuildmat.2014.01.081 ↗
17. Properties of concrete containing fungal treated waste foundry sand10.1016/j.conbuildmat.2011.08.091 ↗
18. Effect of waste foundry sand (WFS) as partial replacement of sand on the strength, ultrasonic pulse velocity and permeability of concrete10.1016/j.conbuildmat.2011.06.041 ↗
19. Mineral Commodity Summaries
20. T.J. Brown, N.E. Idoine, E.R. Raycraft, R.A. Shaw, E.A. Deady, S.F. Hobbs, T. Bide, World Mineral Production 2011-15, British Geological Survey, 2017.
21. Attenuation of metal species in acidic solutions using bentonite clay: implications for acid mine drainage remediation10.1080/02772248.2014.923426 ↗
22. Siberian gas venting and the end-permian environmental crisis10.1016/j.epsl.2008.11.015 ↗
23. An environmental evaluation of geopolymer based concrete production: reviewing current research trends10.1016/j.jclepro.2011.03.012 ↗
24. Public engagement with carbon and climate change: to what extent is the public ‘carbon capable’?10.1016/j.gloenvcha.2010.07.011 ↗
25. Manahan · 2017
26. A. Leiserowitz, Communicating the risks of global warming: American risk perceptions, affective images, and interpretive communities, Creating a climate for change: Communicating climate change and facilitating social change, (2007) pp. 44–63.10.1017/CBO9780511535871.005 ↗
27. Application of bacteria as self-healing agent for the development of sustainable concrete10.1016/j.ecoleng.2008.12.036 ↗
28. Life cycle assessment of building materials: comparative analysis of energy and environmental impacts and evaluation of the eco-efficiency improvement potential10.1016/j.buildenv.2010.12.002 ↗
29. Inventory analysis of LCA on steel-and concrete-construction office buildings10.1016/j.enbuild.2007.10.016 ↗
30. Properties of concrete incorporating nano-silica10.1016/j.conbuildmat.2012.06.044 ↗
31. Limestone filler cement in low w/c concrete: a rational use of energy10.1016/S0008-8846(02)01087-6 ↗
32. Durability of steel reinforced concrete in chloride environments: an overview10.1016/j.conbuildmat.2011.12.038 ↗
33. Influence of water/powder ratio on strength properties of self-compacting concrete containing coal fly ash and bottom ash10.1016/j.conbuildmat.2011.10.035 ↗
34. Production of lightweight aggregates from mining residues, heavy metal sludge, and incinerator fly ash10.1016/j.jhazmat.2006.09.094 ↗
35. Influence of the use of recycled concrete aggregates from different sources on structural concrete10.1016/j.conbuildmat.2014.08.030 ↗
36. Effect of graphene oxide nanosheets of microstructure and mechanical properties of cement composites10.1016/j.conbuildmat.2013.08.022 ↗
37. Graphene-based ultracapacitors10.1021/nl802558y ↗
38. Recycled aggregate from C&D waste & its use in concrete–A breakthrough towards sustainability in construction sector: a review10.1016/j.conbuildmat.2014.07.003 ↗
39. The function of fillers in concrete10.1007/BF02486602 ↗
40. The role of inorganic polymer technology in the development of ‘green concrete’10.1016/j.cemconres.2007.08.018 ↗
41. Sustainable cement production—present and future10.1016/j.cemconres.2011.03.019 ↗
42. Pakistani bentonite in mortars and concrete as low cost construction material10.1016/j.clay.2009.06.011 ↗
43. Evaluation of the properties of bentonite concrete with and without steel fiber
44. Promoting the use of crumb rubber concrete in developing countries10.1016/j.wasman.2007.09.035 ↗
45. Assessment of the mechanical performance of crumb rubber concrete10.1016/j.conbuildmat.2016.08.040 ↗
46. Experimental investigation on improvement of rubcrete
47. SANS 50197-1, South African National Standard, Composition, specifications and conformity criteria for common cements, Pretoria, South Africa, 2013.
48. SANS 3001-AG1, South African National Standard, Civil engineering test methods – Part AG1: Particle size analysis of aggregates by sieving, Pretoria, South Africa, 2014.
49. SANS 1083, South African National Standard, Aggregates from natural sources — Aggregates for concrete, Pretoria, South Africa, 2014.
50. SANS 3001-GR20, South African National Standard, Civil Engineering Test Methods, Part GR20: Determination of the Moiture Content by Oven-Drying, 2010, South Africa, Pretoria.
51. SANS 3001-AG23, South African National Standard, Civil engineering test methods Part AG23, Particle and relative densities of aggregates, Pretoria, South Africa, 2014.
52. SANS 5845, South African National Standard, Bulk densities and voids content of aggregates, Pretoria, South Africa, 2006.
53. Apha · 1998
54. SANS 5862-1. 2006. South African National Standard. Concrete Tests – Consistence of Freshly mixed concrete – Slump Test. Pretoria, South Africa.
55. BS 3148, Methods of test for water for making concrete (including notes on the suitability of the water), 1980.
56. SANS 5863. 2006. South African National Standard. Concrete Tests-Compressive strength of hardened concrete. Pretoria, South Africa.
57. SANS 6253. 2006. South African National Standard. Concrete Tests-Tensile splitting strength of concrete. Pretoria, South Africa.
58. Owens · 2013
59. A study of future trend for sustainable development by incorporation of supplementary cementitious materials
60. Utilisation of waste product of steel industry
61. Vesuvadapateran · 2013
62. Removal of nickel on Bofe bentonite calcined clay in porous bed10.1016/j.jhazmat.2009.10.128 ↗
63. Karnland · 2010
64. The impact of rubber crumb on the mechanical and chemical properties of concrete
65. ASTM C33 · 2016
66. K.S. Mojapelo, W.K. Kupolati, J.M. Ndambuki, I.D. Idowu, A.O. Adeboje, C. Kambole, Utilization of Wastewater Sludge for Lightweight Concrete, Proceedings of the 8th International Conference on Appropriate Technology, 22–25 November, 2018, Songhaï Center, Porto-Novo, Benin, Endogenous Knowledge, Appropriate Technology and Innovation: Linking the Past and the Future.
67. Alexander · 2010
68. Owens · 2009
69. M.S. Karanja, Investigating the Effects of the Replacement of Sand with Quarry Dust on the Properties of Concrete, 2017.
70. SANS 1215, South African Bureau Of Standards, Concrete masonry unit, Pretoria, South Africa, 2008.
71. M.K. Kucche, S.S. Jamkar, P.A. Sadgir, Quality of water for making concrete: a review of literature, 2015.
72. World Health Organization · 1993
73. Production of lightweight concrete from waste tire rubber crumb
74. Influence of partial substitution of sand with crumb rubber on the microstructural and mechanical properties of concrete in Pretoria, South Africa10.1504/IJEWM.2019.100657 ↗
75. Adeboje · 2013 · 201
76. EN 12390-7. 2009. Testing Hardened Concrete: density of Hardened Concrete. European Standard.
77. Utilization of recycled crumb rubber as fine aggregates in concrete mix design10.1016/j.conbuildmat.2012.12.054 ↗
78. Production of lightweight concrete from waste tire rubber crumb
79. Nanomaterials and nanotechnologies for civil engineering. Buletinul Institutului Politehnic din lasi
80. The use of nanoclay as a construction material
81. Application of nanotechnology in building materials
82. Strength and durability analysis of nano clay in concrete
83. Effect of nano-clay on mechanical properties and microstructure of ordinary Portland cement mortar