Epoxy composite coating corrosion protection properties reinforcement through the addition of hydroxyl-terminated hyperbranched polyamide non-covalently assembled graphene oxide platforms
Source abstract
Abstract
Abstract This paper presents the role of GO particle functionalization by different contents of hydroxyl-terminated hyper-branched polyamide on the epoxy coating corrosion protection properties. Raman spectroscopy, UV–visible analysis, and field emission scanning electron microscopy (FE-SEM) methods were applied to study the HB/GO interactions and morphology at different ratios. Then, by electrochemical impedance spectroscopy (EIS) and accelerated corrosion test (salt spray) the Epoxy-GO and Epoxy-HB/GO = 0.25, 0.5, 1.0 and 2.5 systems corrosion protection properties were investigated. Results obtained from Raman spectroscopy, UV–Visible analysis, and FE-SEM measurement proved that the GO sheets were successfully modified by HB molecules. SEM results evidenced that the GO particle dispersion quality in the epoxy matrix was significantly improved after modification by HB. Pull-off results revealed significant improvement in the epoxy film adhesion to the steel surface in the presence of HB/GO. Results disclosed that the epoxy composite coating reinforced with HB/GO = 0.5 and 1.0 showed the largest impedance (>1010 ohm cm2) and lowest delamination values. Generally, the modified GO sheets significantly improved the epoxy coating corrosion protection properties due to the role of HB in improving the dispersion state (proved by SEM results) and interfacial interactions between the GO and epoxy matrix.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Conducting polymers and applications · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Corrosion behavior of modified nano carbon black/epoxy coating in accelerated conditions10.1016/j.apsusc.2015.01.038 ↗
2. An investigation on the corrosion behavior of the epoxy coating embedded with mesoporous silica nanocontainer loaded by sulfamethazine inhibitor10.1016/j.porgcoat.2018.12.022 ↗
3. Polyaniline-clay composite-containing epoxy coating with enhanced corrosion protection and mechanical properties10.1016/j.synthmet.2018.07.012 ↗
4. The effect of polycrystalline graphene on corrosion protection performance of solvent based epoxy coatings: Experimental and DFT studies10.1016/j.jallcom.2018.06.087 ↗
5. Fabricating an epoxy composite coating with enhanced corrosion resistance through impregnation of functionalized graphene oxide-co-montmorillonite Nanoplatelet10.1016/j.corsci.2017.09.024 ↗
6. Studying the influence of nano-Al2O3 particles on the corrosion performance and hydrolytic degradation resistance of an epoxy/polyamide coating on AA-105010.1016/j.porgcoat.2014.04.017 ↗
7. Studying the effects of micro and nano sized ZnO particles on the corrosion resistance and deterioration behavior of an epoxy-polyamide coating on hot-dip galvanized steel10.1016/j.porgcoat.2011.03.026 ↗
8. Investigation of corrosion protection properties of an epoxy nanocomposite loaded with polysiloxane surface modified nanosilica particles on the steel substrate10.1016/j.porgcoat.2014.07.004 ↗
9. The effect of surface morphology and treatment of Fe3O4 nanoparticles on the corrosion resistance of epoxy coating10.1016/j.jtice.2016.01.001 ↗
10. Effects of combined surface treatments of aluminium nanoparticle on its corrosion resistance before and after inclusion into an epoxycoating10.1016/j.porgcoat.2016.09.010 ↗
11. Corrosion Inhibitor Release from Zn-[Al-PO43−]-[CO32−] Layered Double Hydroxide Nanoparticles
12. Influence of nanoclay particles modification by polyester-amide hyperbranched polymer on the corrosion protective performance of the epoxy nanocomposite10.1016/j.corsci.2014.11.047 ↗
13. Tuning the functionalization degree of graphene: determining critical conditions for inhibiting the corrosion promotion activity ofgraphene/epoxy nanocomposite coatings10.1016/j.matlet.2019.01.009 ↗
14. Distinctive roles of silane coupling agents on the corrosion inhibition performance of graphene oxide in epoxy coatings10.1016/j.porgcoat.2017.05.008 ↗
15. Corrosion protection and adhesion properties of the epoxy coating applied on the steel substrate pre-treated by a sol-gel based silanecoating filled with amino and isocyanate silane functionalized graphene oxide nanosheets10.1016/j.apsusc.2017.12.240 ↗
16. Polyaniline-cerium oxide (PAni-CeO2) coated graphene oxide for enhancement of epoxy coating corrosion protection performance on mild steel10.1016/j.corsci.2018.03.038 ↗
17. Graphene oxide as a potential nanocarrier for Zn(II) to fabricate a dual-functional active/passive protection; sorption/desorption characteristics and electrochemical evaluation10.1016/j.jiec.2019.01.019 ↗
18. Construction of a highly effective self-repair corrosion-resistant epoxy composite through impregnation of 1H-Benzimidazolecorrosion inhibitor modified graphene oxide nanosheets (GO-BIM)10.1016/j.corsci.2018.09.023 ↗
19. Hyperbranched polymers: advances from synthesis to applications10.1039/C4CS00528G ↗
20. Amine-terminated hyperbranched polyamide covalent functionalized graphene oxide-reinforced epoxy nanocomposites with enhanced toughness and mechanical properties10.1016/j.polymertesting.2019.03.017 ↗
21. Synergistic improvement of epoxy composites with multi-walled carbon nanotubes and hyperbranched polymers10.1016/j.compositesb.2018.11.122 ↗
22. Effects of hyperbranched polyamide functionalized graphene oxide on curing behaviour and mechanical properties of epoxy composites10.1016/j.polymertesting.2018.08.029 ↗
23. Improved synthesis of graphene oxide10.1021/nn1006368 ↗
24. Clark · 1997 · 4
25. Highly efficient photoluminescent graphene oxide with tunable surface properties10.1039/c0cc02374d ↗
26. Graphene as a transparent conducting and surface field layer in planar Si solar cells10.1186/1556-276X-9-349 ↗
27. Graphite oxide under high pressure: a Raman spectroscopic study10.1155/2013/731875 ↗
28. Raman spectroscopy and imaging of graphene10.1007/s12274-008-8036-1 ↗
29. Raman characterization of defects and dopants in graphene10.1088/0953-8984/27/8/083002 ↗
30. Fracture behaviors of in situ silica nanoparticle-filled epoxy at different temperatures10.1016/j.polymer.2008.06.040 ↗
31. Grafting of epoxy chains onto graphene oxide for epoxy composites with improved mechanical and thermal properties
32. Determination of coating deterioration with EIS: I. Basic relationships10.5006/1.3585209 ↗
33. Trans. Tianjin Univ., Fast evaluation of degradation degree of organic coatings by analyzing electrochemical impedance spectroscopy data10.1007/s12209-012-1752-3 ↗
34. Estimation and prediction of degradation of coating films by frequency at maximum phase angle
35. Another approach in analysis of paint coatings with EIS measurement: phase angle at high frequencies10.1016/j.corsci.2006.03.012 ↗
36. Evaluation on protective performance of organic coatings by analyzing the change rate of phase angle at high frequency10.1016/S1452-3981(23)18037-0 ↗