journal article·2020-05Open access

Identification of corrosion in a prestressed concrete pipe utilizing acoustic emission technique

Reza Goldaran, Ahmet Turer, Mehdi Kouhdaragh, Kezban Ozlutas

Abstract

Abstract One of the significant imperfections of prestressed cylinder concrete pipe (PCCP) which leads to fatal failure is corrosion in spiral rebars. The use of PCCP is very widespread, but most often, their instantaneous failures are experienced. In this paper, acoustic emission (AE) technique was employed to detect corrosion in PCCP. To achieve this object three experimental specimens were made in the laboratory of Middle East Technical University. Each specimen was built for the specific aim in which the third one was the almost full-scale sample of PCCP. The pipe was loaded internally by water pressure and accelerated corrosion test was conducted on the specimens. For detecting the corrosion, especially for identifying the passive damages, water pressure was fluctuated during the experiment in both dry and wet conditions along with using the Kaiser Effect phenomenon in both conditions. It was observed that significant changes in some captured AE parameters occur as the pipe pressure exceeds the previous level by which the condition assessment is made feasible. Results indicated that the proposed technique is an efficient procedure for evaluating both active and passive damage types in PCCP.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete Corrosion and Durability · Geophysical Methods and Applications · Geotechnical Engineering and Underground Structures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Bertolini · 2013
2. The importance of chloride content at the concrete surface in assessing the time to corrosion of steel in concrete structures10.1016/j.conbuildmat.2007.12.014 ↗
3. Detecting breaks in prestressing pipe wire10.1002/j.1551-8833.2000.tb08972.x ↗
4. Damage assessment of corrosion in prestressed concrete by acoustic emission10.1016/j.conbuildmat.2012.11.071 ↗
5. A fiber Bragg grating pressure sensor and its application to pipeline leakage detection10.1061/9780784412664 ↗
6. A. Alavinasab, Do Broken Prestressing Wire Wraps at the Joint Impact the Safe Operation of a Pipe?, (2014).10.1061/9780784413692.124 ↗
7. Effects of the location of broken prestressing wires wraps in structural integrity of a damaged PCCP
8. Non-destructive evaluation for corrosion monitoring in concrete: a review and capability of acoustic emission technique10.3390/s150819069 ↗
9. Moore · 2005 · vol 6
10. Acoustic emission characterization of corrosion induced damage in reinforced concrete10.5006/1.3593933 ↗
11. C. Hellier, Handbook of nondestructive evaluation, (2001).
12. Corrosion propagation of prestressing steel strands in concrete subject to chloride attack10.1016/j.conbuildmat.2011.04.011 ↗
13. Corrosion of prestressed wire in concrete
14. Stress corrosion cracking and hydrogen embrittlement susceptibility of an eutectoid steel employed in prestressed concrete10.1016/S0010-938X(03)00035-0 ↗
15. Reliability of acoustic emission as a technique to detect corrosion and stress corrosion cracking on prestressing steel strands10.1016/S1452-3981(23)12894-X ↗
16. An acoustic emission technique for monitoring pitting corrosion of austenitic stainless steels10.1016/0010-938X(95)00036-J ↗
17. Ability of acoustic emission technique for detection and monitoring of crevice corrosion on 304L austenitic stainless steel10.1016/S0963-8695(03)00065-3 ↗
18. On the opportunity to use non-intrusive acoustic emission recordings for monitoring uniform corrosion of carbon steel and austenitic stainless steel in acid and neutral solutions10.1784/insi.2005.47.8.465 ↗
19. Acoustic emission characteristics of stress corrosion cracks in a type 304 stainless steel tube10.1016/j.net.2015.04.001 ↗
20. P. Tscheliesnig, A. Jagenbrein, G. Lackner, Detecting corrosion during inspection and maintenance of industrial structures using acoustic emission, (n.d.).
21. Acoustic emission parameters and waveforms characteristics of fracture failure process of asphalt mixtures10.1016/j.conbuildmat.2019.04.150 ↗
22. Characterization of damage in concrete beams under bending with Acoustic Emission Technique (AET)10.1016/j.conbuildmat.2018.07.217 ↗
23. Monitoring concrete deterioration due to reinforcement corrosion by integrating acoustic emission and FBG strain measurements10.3390/s17030657 ↗
24. Acoustic emission monitoring and classification of signals in cement composites during early-age hydration10.1016/j.conbuildmat.2018.11.067 ↗
25. A.A. Abouhussien, A.A.A. Hassan, STR-844: cover crack growth monitoring in RC structures subjected to corrosion with acoustic emission sensors, (2016).
26. Damage monitoring of masonry structure under in-situ uniaxial compression test using acoustic emission parameters10.1016/j.conbuildmat.2019.04.192 ↗
27. M. Aminfar, A.T.-M.M. Engineering, undefined 2017, Experimental study on corrosion detection of prestressed pipe using Acoustic Emission method, Jast.Modares.Ac.Ir. (n.d.). http://jast.modares.ac.ir/article-15-7967-en.html (accessed December 21, 2019).
28. R. Goldaran, M.A. Lofollahi-Yaghin, M.H. Aminfar, A. Turer, undefined 2017, Investigation of attenuation and acoustic wave propagation path caused by corrosion for reliability assessment of pre-stressed pipe monitoring using Acoustic Emission technique, Modares Mechanical Engineering (n.d.). http://msa.modares.ac.ir/article-15-7523-en.pdf (accessed December 21, 2019).
29. Single-sensor acoustic emission source localization in plate-like structures using deep learning10.3390/aerospace5020050 ↗
30. A. Ebrahimkhanlou, B. Dubuc, S. Salamone, A deep learning-based framework for two-step localization and characterization of acoustic emission sources in metallic panels using only one sensor, in: P. Fromme, Z. Su (Eds.), Heal. Monit. Struct. Biol. Syst. XIII, SPIE, 2019: p. 6. doi:10.1117/12.2514228.10.1117/12.2514228 ↗
31. Erkenntnisse und Folgerungen aus der Messung von Geräuschen bei Zugbeanspruchung von metallischen Werkstoffen10.1002/srin.195301381 ↗
32. Grosse · 2008
33. M. Ohtsu, Acoustic emission characteristics in concrete and diagnostic applications. J. Acoustic Emission 6 (2) (Apr./Jun. 1987) 99–108. - ScienceDirect, (n.d.). https://www.sciencedirect.com/science/article/pii/096386959190495O (accessed December 19, 2019).