Mechanical properties and drying shrinkage of lightweight cementitious composite incorporating perlite microspheres and polypropylene fibers
Source abstract
Abstract
Abstract This research focuses on the development of lightweight cementitious composite (LCC) with targeted densities, 800 kg/m3 and 1000 kg/m3 by incorporating perlite microspheres. The mechanical properties and the drying shrinkage of the LCC with 0.15%, 0.30% and 0.50% of polypropylene fibers were evaluated. It was found out that compressive strength achieved by LCC is in the range of 10.4–23.2 MPa and the specific strength achieved is up to 23.70 kPa/kgm−3 which is superior than most of lightweight concretes with similar density. Although the effect of polypropylene (PP) fibers on the compressive strength was minimal, the inclusion of low PP fibers dosage could improve the flexural strength of LCC up to 26.7%. The inclusion of PP fibers also showed positive effect in reducing the drying shrinkage strain of LCC. In overall, LCC with good mechanical properties and acceptable shrinkage was successfully developed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Structural Behavior of Reinforced Concrete
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Development of Ultra-Lightweight Fiber Reinforced Concrete applying expanded waste glass10.1016/j.jclepro.2015.07.082 ↗
2. Effects of Different Lightweight Functional Fillers for Use in Cementitious Composites10.1007/s40069-016-0184-1 ↗
3. Evaluation of the mechanical properties, durability and drying shrinkage of the mortar reinforced with polyacrylonitrile microfibers10.1016/j.conbuildmat.2019.03.178 ↗
4. Expanded perlite aggregate characterization for use as a lightweight construction raw material
5. Effect of expanded perlite aggregate on the properties of lightweight concrete10.1016/j.jmatprotec.2007.10.052 ↗
6. HSC with Expanded Perlite Aggregate at Wet and Dry Curing Conditions10.1061/(ASCE)MT.1943-5533.0000134 ↗
7. Lightweight pozzolanic materials used in mortars: Evaluation of their influence on density, mechanical strength and water absorption10.1016/j.cemconcomp.2008.11.003 ↗
8. Effect of expanded perlite on the mechanical properties and thermal conductivity of lightweight concrete10.1016/j.enbuild.2010.11.008 ↗
9. A synopsis about perlite as building material – A best practice guide for Civil Engineer10.1016/j.conbuildmat.2016.06.001 ↗
10. Perlite toxicology and epidemiology - a review10.3109/08958378.2014.881940 ↗
11. Berge · 2009 · 239
12. Characterization of lightweight ferrocement panels containing expanded perlite-based mortar10.1016/j.conbuildmat.2015.02.009 ↗
13. Tailoring the thermal and mechanical properties of lightweight cement-based composites by macro and micro fillers10.1016/j.cemconcomp.2019.04.014 ↗
14. Effective use of ground waste expanded perlite as green supplementary cementitious material in eco-friendly alkali activated slag composites10.1016/j.jclepro.2018.12.118 ↗
15. J. Gora, D. Barnat-Hunek, P. Wlaz, M. Garbacz, The analysis of influence of polymer admixtures on properties of lightweight concrete, in: Iii International Conference of Computational Methods in Engineering Science (Cmes 18), 252, 2019.10.1051/matecconf/201925208007 ↗
16. Mechanical properties and size effects in lightweight mortars containing expanded perlite aggregate10.1617/s11527-010-9662-0 ↗
17. Hydrophobic coating of expanded perlite particles by plasma polymerization10.1016/j.cej.2015.09.007 ↗
18. Preparation of surface-vitrified micron sphere using perlite from Xinyang, China
19. Production of durable expanded perlite microspheres in a vertical electrical furnace
20. Neville · 2011
21. An analysis of the applicability of existing shrinkage prediction models to concretes containing steel fibers or crumb rubber
22. Influence of fibers on drying shrinkage in restrained concrete10.1016/j.conbuildmat.2017.05.093 ↗
23. Mechanical properties of hybrid fiber reinforced lightweight aggregate concrete made with natural pumice10.1016/j.conbuildmat.2010.11.058 ↗
24. Development of cement-based lightweight composites – Part 1: Mix design methodology and hardened properties10.1016/j.cemconcomp.2013.03.030 ↗
25. Effect of expanded perlite aggregate on the properties of lightweight concrete10.1016/j.jmatprotec.2007.10.052 ↗
26. Design and evaluation of polyester fiber and SBR latex compound-modified perlite mortar with rubber powder10.1016/j.conbuildmat.2016.10.060 ↗
27. Utilization of fly ash with silica fume and properties of Portland cement–fly ash–silica fume concrete10.1016/j.fuel.2009.10.003 ↗
28. Mechanical properties of polypropylene hybrid fiber-reinforced concrete10.1016/j.msea.2008.05.037 ↗
29. Polymer-based admixtures10.1016/S0958-9465(97)00065-6 ↗
30. Fiber-reinforced cementitious composites incorporating glass cenospheres – Mechanical properties and microstructure10.1016/j.conbuildmat.2017.07.235 ↗
31. Effects of expanded polystyrene (EPS) particles on fire resistance, thermal conductivity and compressive strength of foamed concrete10.1016/j.conbuildmat.2016.02.218 ↗
32. Effect of polypropylene fibers on the shrinkage cracking behavior of lightweight concrete10.1680/macr.2011.63.11.871 ↗
33. Effects of expanded perlite aggregate and mineral admixtures on the compressive strength of low-density concretes10.1016/S0008-8846(01)00615-9 ↗
34. Properties investigation of fiber reinforced cement-based composites incorporating cenosphere fillers10.1016/j.conbuildmat.2017.02.093 ↗
35. Development of ultra-lightweight cement composites with low thermal conductivity and high specific strength for energy efficient buildings10.1016/j.conbuildmat.2015.04.004 ↗
36. Compressive and flexural strength of fiber-reinforced foamed concrete: Effect of fiber content, curing conditions and dry density10.1016/j.conbuildmat.2018.11.197 ↗
37. Utilization of recycled waste as filler in foam concrete10.1016/j.jobe.2018.04.032 ↗
38. Improvement of mechanical properties in polypropylene- and glass-fiber-reinforced peach shell lightweight concrete10.1155/2018/6250941 ↗
39. Evaluation of the mechanical behavior of pumice lightweight concrete reinforced with steel and polypropylene fibers10.1016/j.conbuildmat.2018.11.109 ↗
40. Manufacturing of high-strength lightweight aggregate concrete using blended coarse lightweight aggregates10.1016/j.jobe.2017.07.002 ↗
41. Effect of incorporation of metakaolin and recycled coarse aggregate on properties of concrete10.1016/j.jclepro.2018.10.221 ↗
42. Shrinkage strains of lightweight aggregate concrete using expanded bottom ash and dredged soil granules10.1016/j.conbuildmat.2018.08.168 ↗
43. Properties of polymer latex-cement-steel fiber composites10.1016/0262-5075(81)90039-7 ↗
44. Effects of latex modification on fresh state consistency, short term strength and long term transport properties of cement mortars10.1016/j.conbuildmat.2016.12.080 ↗