Mechanical, microstructural and acid resistance aspects of improved hardened Portland cement pastes incorporating marble dust and fine kaolinite sand
Source abstract
Abstract
Abstract The objective of this research is the implementation of low cost solid wastes like marble dust (MD) and fine kaolinite sand (FKS) aspiring to upgrade mechanical, microstructure and acid resistance aspects of the hardened Portland cement pastes. Diverse blends of (OPC-MD-FKS) were adapted and then were cured under tap water for hydration up to 90 days. Physico-chemical and mechanical aspects of the fabricated specimens were evaluated via determination of compressive strength values (MPa) and water absorption percentages (%) at diverse durations of hydration (1, 3, 7, 28 and 90 days). The deterioration actions of disparate acidic media towards selected hardened mixes were assessed via immersing the 28-days hydrated pastes in 5% sulfuric or 10% acetic acid solutions for 1, 2, 4 and 6 months. Microstructure and phase configuration of the developed hydrates were explored via scanning electron microscopy (SEM), X-ray diffraction (XRD) and differential thermal analysis (DTA) techniques. The attained consequences acknowledged that partial substitution of OPC by up to 20% MD boosted compressive strength magnitudes and sorptivity of the hardened pastes. In addition, OPC-MD hardened pastes exhibited higher resistance to the deterioration action of sulfuric acid compared to those containing additional FKS. On the other hand, acetic acid ascertained to have severe deterioration action towards all investigated blends after 6 months of immersion due to the progression of soluble salts.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Recycled Aggregate Concrete Performance
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. Woodson · 2009
2. Durability of steel reinforced concrete in chloride environments: an overview10.1016/j.conbuildmat.2011.12.038 ↗
3. Investigations of sulfuric acid corrosion of concrete. I: modeling and chemical observations10.1061/(ASCE)0733-9372(2001)127:7(572) ↗
4. F. Jahani, J. Devinny, F. Mansfeld, I. G. Rosen, Z. Sun, C. Wang, Investigations of sulfuric acid corrosion of concrete. II: electrochemical and visual observations, J. Environ. Eng. 127(2001) 580–4.10.1061/(ASCE)0733-9372(2001)127:7(580) ↗
5. ACI Committee 201. Quid to durable concrete, American Concrete Institute, Report of ACI Committee. Detroit: ACI 201.2R-77, DETER, (1982) 37.
6. Acidic attack of cement based materials - A review, Part 1. Principle of acidic attack10.1016/S0950-0618(01)00012-5 ↗
7. Acidic attack of cement based materials - A review, Part 2. Principle of acidic attack10.1016/S0950-0618(02)00011-9 ↗
8. S. Rostam (Ed), Durable concrete structures design guide, Published by Thomas Telford Services Ltd (1997).
9. Response of Concrete to Sulfuric Acid Attack
10. A. Bertron, J. Duchensne, Attack of Cementitious Materials by Organic Acids in Agricultural and Agrofood Effluents. In M. Alexander, N. De Belie, A. Bertron, book: Performance of cement-based materials in aggressive aqueous environments, state-of-the-Art Report, RILEM TC 211-PAE (2013).10.1007/978-94-007-5413-3_6 ↗
11. Acid corrosion resistance of different cementing materials10.1016/S0008-8846(00)00234-9 ↗
12. Modelling acid attack on concrete: part I. The essential mechanisms10.1016/j.cemconres.2005.04.002 ↗
13. Shi · 2008
14. Rheological and mechanical properties of mortars prepared with natural and manufactured sands10.1016/j.cemconres.2008.03.020 ↗
15. The role of aggregates on the structure and properties of lime mortars10.1016/j.cemconcomp.2005.05.001 ↗
16. Aggregate-cement paste interface: ii: influence of aggregate physical properties10.1016/S0008-8846(98)00126-4 ↗
17. Sustainable industrial design and waste management: cradle-tocradle or sustainable development
18. Gainful utilization of marble waste – an effort towards protection of ecology & environment
19. Characterization of marble powder for its use in mortar and concrete10.1016/j.conbuildmat.2009.08.013 ↗
20. Influence of marble and limestone dusts as additives on some mechanical properties of concrete
21. Partial replacement of cement with marble dust powder
22. Re-use of waste marble dust in the production of cement and concrete10.1016/j.conbuildmat.2013.09.005 ↗
23. Effects of the usage of diatomite and waste marble powder as partial replacement of cement on the mechanical properties of concrete10.1016/j.conbuildmat.2010.07.002 ↗
24. The effect of the using waste marble dust as fine sand on the mechanical properties of the concrete
25. Use of marble dust as paste replacement for recycling waste and improving durability and dimensional stability of mortar10.1016/j.conbuildmat.2018.01.154 ↗
26. Improvement the acid resistance of Portland cement pastes using rice husk ash and cement kiln dust as additives10.1007/s10973-012-2458-4 ↗
27. Influence of various acids on the physico-mechanical properties of pozzolanic mortars10.1007/s12046-007-0048-0 ↗
28. Thermal resistance, microstructure and mechanical properties of type I Portland cement pastes containing low-cost nanoparticles10.1007/s10973-017-6629-1 ↗
29. Superior physico-mechanical, fire resistivity, morphological characteristics and gamma radiation shielding of hardened OPC pastes incorporating ZnFe2O4 spinel nanoparticles10.1016/j.conbuildmat.2019.117807 ↗
30. Gamma radiation shielding, fire resistance and physicochemical characteristics of Portland cement pastes modified with synthesized Fe2O3 and ZnO nanoparticles10.1016/j.conbuildmat.2018.04.071 ↗
31. Hydrothermal characteristics of high slag cement pastes made with and without silica sand10.1680/adcr.2012.24.1.23 ↗
32. Physicochemical characteristics of cementitious building materials derived from industrial solid wastes10.1016/j.conbuildmat.2016.09.112 ↗
33. Efficiency of waste marble powder in controlling alkali–silica reaction of concrete: a sustainable approach10.1016/j.conbuildmat.2017.08.002 ↗
34. Feasibility of waste marble powder in concrete as partial substitution of cement and sand amalgam for sustainable growth10.1016/j.jobe.2017.11.024 ↗
35. Modeling the influence of limestone filler on cement hydration using CEMHYD3D Cem10.1016/j.cemconcomp.2005.10.006 ↗
36. Properties of cement and mortar incorporating marble dust and crushed bricks
37. Effects of the usage of diatomite and waste marble powder as partial replacement of cement on the mechanical properties of concrete10.1016/j.conbuildmat.2010.07.002 ↗
38. Strength, permeation and micro-structural characteristics of concrete incorporating waste marble10.1016/j.conbuildmat.2019.01.079 ↗
39. Waste marble dust: An interesting residue to produce cement10.1016/j.conbuildmat.2019.07.031 ↗
40. Recycled sand in lime-based mortars
41. The Effect of marble powder and silica fume as partial replacement for cement on mortar
42. Chemical and physical effects of silica fume on the mechanical behavior of concrete
43. A. Allahverdi, S. Frantisˇek, Gypsum-free Portland cement, an alkali-activated material suitable for acid corrosion protection. Proc. 3rd Int. conference on alkali activated materials, Prague, Czech Republic, June 21–22(2007) 39–53.
44. Sulfate attack on hardened cement pastes with different porosities in the presence of water-repelling admixtures10.1680/adcr.2008.00006 ↗
45. Cement pastes alteration by liquid manure organic acids: chemical and mineralogical characterization10.1016/j.cemconres.2004.01.002 ↗
46. Resistance of blended cement pastes subjected to organic acids: Quantification of anhydrous and hydrated phases10.1016/j.cemconcomp.2013.09.007 ↗
47. Corrosion of hardened cement paste by acetic and nitric acids part II: formation and chemical composition of the corrosion products layer10.1016/0008-8846(94)90164-3 ↗
48. Acid attack on pore-reduced cements10.1023/A:1018610109429 ↗
49. Degradation of cement-based materials by various organic acids in agro-industrial waste-waters10.1016/j.cemconres.2011.04.007 ↗
50. Enhancing the thermal resistance and mechanical properties of hardened Portland cement pastes by using pumice and Al2O310.1007/s10973-016-5863-2 ↗
51. Kinetics and thermodynamic studies of removal of CrO42- ions by ettringite10.1007/s10973-013-3592-3 ↗
52. Synthesis of Cr(VI)-ettringite in portlandite suspensions as a function of pH10.2109/jcersj.114.299 ↗
53. Physico-chemical characteristics of blended cement pastes containing electric arc furnace slag with and without silica fume10.1016/j.hbrcj.2014.07.002 ↗