journal article·2020-11

Comprehensive equation of local bond stress between UHPC and reinforcing steel bars

Ahad Amini Pishro, Xiong Feng, Yang Ping, Huang Dengshi, Reza S. Shirazinejad

Publisher page

Abstract

Abstract An experimental test was conducted to analyze the Local Bond Stress (LBS) between Ultra-High-Performance Concrete (UHPC) and reinforcing steel bars. The test included 144 specimens based on RILEM standards, using pullout tests. Reinforcing steel bars of 16 mm and 18 mm in diameter, nano-silica contents from 0% to 6.5% by weight of cement, conventional and thermal curing methods, and the bond lengths and concrete covers of d b , 2 d b and 3 d b were the research parameters in this study. Moreover, sixteen experimentally tested and 39 non-tested specimens were modeled using ABAQUS by taking into account additional parameters such as bond length and concrete cover of 4 d b , and bar diameters of 12, 14, 16, 18 and 20 mm. The resulting proposal was a comprehensive LBS equation to calculate the local bond stress between reinforcing steel bars and UHPC. A fair comparison between the results confirmed that the values obtained from the proposed LBS equation were logically in good agreement with the experimental and numerical results.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Fire effects on concrete materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (67)

Show source-provided references
1. S. Pyoa, M. Alkaysib, S. El-Tawilb, Crack propagation speed in ultra high performance concrete (UHPC), (2016) 109–118.10.1016/j.conbuildmat.2016.03.148 ↗
2. Composition of reactive powder concrete10.1016/0008-8846(95)00144-2 ↗
3. P. Goltermann, V. Johansen, L. Palbol, Packing of aggregates: an alternative tool to determine the optimal aggregate mix, ACI Mater. J. 94 (5) (1997) 435–443.10.14359/328 ↗
4. M. Cheyrezy, V. Maret, L. Frouin, Microstructural analysis of reactive powder concretes, Cem. Concr. Res. 25 (7) (19950 1491–1500. doi:10.1016/0008-8846(95)00143-Z10.1016/0008-8846(95)00143-Z ↗
5. H. Toutanji, S. McNeil, Z. Bayasi, Chloride permeability and impact resistance of polypropylene-fiber-reinforced silica fume concrete, Cement Concr. Res., 28 (7) (1998) 961–968.10.1016/S0008-8846(98)00073-8 ↗
6. High temperature resistance of normal strength and autoclaved high strength mortars incorporated polypropylene and steel fibers10.1016/j.conbuildmat.2006.11.003 ↗
7. Fehling · 2004 · 327
8. B. Graybeal, J. Tanesi, Durability of an ultrahigh-performance concrete, J. Mater. Civil Eng., ASCE, 19 (10) (2007) 848–854.10.1061/(ASCE)0899-1561(2007)19:10(848) ↗
9. Experimental study of durability of reactive powder concretes10.1061/(ASCE)0899-1561(1996)8:1(1) ↗
10. Concrete carbonation tests in natural and accelerated conditions10.1680/adcr.2003.15.4.171 ↗
11. Experimental procedure for the calculation of chloride diffusion coefficients in concrete from migration tests10.1680/adcr.1994.6.23.127 ↗
12. ACI Committee 408, Bond and Development of Straight Reinforcing Bar in Tension (ACI 408R-03), American Concrete Institute, 2003.
13. K. Droll, Influence of additions on ultra high performance concretes-grain size optimization, in: Proceedings of the International Symposium on Ultra High Performance Concrete, Kassel University Press, Kassel, Germany, September 13–15, 2004, pp. 285–301.
14. The durability characteristics of high performance concrete: a review10.1016/S0958-9465(02)00081-1 ↗
15. The effect of curing conditions on compressive strength of ultra high strength concrete with high volume mineral admixtures10.1016/j.buildenv.2006.03.013 ↗
16. B. Graybeal, J. Tanesi, Durability of an ultrahigh-performance concrete, J. Mater. Civil Eng., ASCE, 19 (10) (2007) 848–854.10.1061/(ASCE)0899-1561(2007)19:10(848) ↗
17. Ultra-high performance concrete: mechanical performance, durability, sustainability and implementation challenges10.1007/s40069-016-0157-4 ↗
18. Influence of silica fume addition on concrete physical properties and on corrosion behavior of reinforcement bars10.1016/S0958-9465(02)00120-8 ↗
19. A preliminary assessment of the use of an amorphous silica residual as a supplementary cementing material10.1016/S0008-8846(99)00269-0 ↗
20. A. Sadrmomtazi, F. Balalaei, A.K. Haghi, Investigation of mechanical and physical properties of mortars containing silica fume and nano SiO2, in: 3rd International Conference on Concrete & Development, Tehran, Iran, 27–29 April, 2009, pp. 1153–1161.
21. The role of silica fume in the kinetics and mechanisms during the early stage of cement hydration10.1016/S0008-8846(00)00374-4 ↗
22. experimental investigation and theoretical modeling of silica fume activity in concrete10.1016/S0008-8846(98)00171-9 ↗
23. Quantitative determination of pozzolanas in hydrated system of cement or Ca(OH)2 with fly ash or silica fume10.1016/0008-8846(85)90100-0 ↗
24. Barnes · Contact Concrete Res. · 1978 · 8 · 23310.1016/0008-8846(78)90012-1 ↗
25. Influence of nano-Si02 addition on properties of hardened cement paste as compared with silica fume
26. Characteristics of Cement Mortar with Nano-Si02 Particles10.1016/j.conbuildmat.2005.12.020 ↗
27. J.S. Belkowitz, D. Armentrout, An Investigation of Nano Silica in the Cement Hydration Process, in: National Ready Mixed Concrete Association, Concrete Sustainability Conference, 2010.
28. Properties of high-volume fly ash concrete incorporating nano-SiO210.1016/j.cemconres.2003.11.013 ↗
29. Microstructure of cement mortar with nano-particles10.1016/S1359-8368(03)00052-0 ↗
30. T. Ji, A. Mirzayee, Z. Zangeneh-Madar, E. Zangeneh-Madar, Preliminary study on water infiltration of concrete containing nano-Si02 and silicone, in: 8th International Congress on Civil Engineering, University of Shiraz, Shiraz, Iran, 2009.
31. Effect of nano-silica on rheology and fresh properties of cement pastes and mortars10.1016/j.conbuildmat.2009.02.005 ↗
32. Effects of modified metakaolin using nano-silica on the mechanical properties and durability of concrete10.3390/ma12142291 ↗
33. A. Korpa, R. Trettin, The Use of Synthetic Colloidal Silica Disperesions for Making High performance and UItra High performance systems(HPC/UHPC), in: International symposium on UItra High performance Concrete, Kassel, Germany, September 13–15 2004, pp. 155–164.
34. B. Graybeal, Material Property Characterization of Ultra-High Performance Concrete, Federal Highway Administration, Publication No. FHWA-HRT-06-103, 2006.
35. Investigating the effects of solarcure curing method on the compressive strength, microstructure, and polymeric reaction of fly ash based geopolymer10.1016/j.conbuildmat.2018.06.046 ↗
36. Evaluation of the mechanical properties and durability of cement mortars containing nanosilica and rice husk ash under chloride ion penetration10.1016/j.conbuildmat.2015.01.045 ↗
37. Effect of partial replacement of fly ash by metakaolin on strength development of fly ash based geopolymer mortar10.4028/www.scientific.net/KEM.744.131 ↗
38. Statistical modeling and mix design optimization of fly ash based engineered geopolymer composite using response surface methodology
39. Effects of nano-silica on compressive strength and durability properties of concrete with different water to binder ratios
40. Influence of different types of nano-SiO2 particles on properties of high-performance concrete10.1016/j.conbuildmat.2016.03.041 ↗
41. Chloride induced corrosion durability of high volume fly ash concretes containing nano particles10.1016/j.conbuildmat.2015.09.030 ↗
42. Influence of metakaolin, fly ash and nano silica on mechanical and durability properties of concrete
43. Comparative study on effects of Class F fly ash, nano silica and silica fume on properties of high-performance self-compacting concrete10.1016/j.conbuildmat.2015.07.001 ↗
44. P. Ganesh, A. Ramachandra Murthy, S. Sundar Kumar, M. Mohammed Saffiq Reheman, N.R. Iyer, Effect of nano-silica on durability and mechanical properties of high-strength concrete, Mag. Concr. Res. 68 (2015) 229–236.10.1680/jmacr.14.00338 ↗
45. Experimental study on bond stress between ultra-high performance concrete and steel reinforcement
46. New method development for evaluation concrete chloride ion permeability10.1016/j.conbuildmat.2015.05.092 ↗
47. Time-dependence of chloride diffusion for concrete containing metakaolin10.1016/j.jobe.2016.06.003 ↗
48. Effects of extraction methods and factors on leaching of metals from recycled concrete aggregates10.1007/s11356-016-6456-0 ↗
49. Concrete made with hybrid blends of crumb rubber and metakaolin: optimization using response surface method10.1016/j.conbuildmat.2016.06.047 ↗
50. Experimental investigation and statistical modeling of frp confined ruc using response surface methodology10.28991/cej-2019-03091243 ↗
51. D. Darwin, J. Zuo, M.L. Tholen, E.K. Idun, Development length criteria for conventional and high relative rib area reinforcing bars, ACI Struct. J., 93 (3) (1996) 347–359.10.14359/9694 ↗
52. J. Zuo, D. Darwin, Splice strength of conventional and high relative rib area bars in normal and high-strength concrete, ACI Struct. J., 97 (65) (2000) 630–641.10.14359/7428 ↗
53. M.R. Esfahani, B.V. Rangan, Local bond strength of reinforcing bars in normal strength and high-strength concrete (HSC), ACI Struct. J., 95 (2) (1998) 96–106.10.14359/530 ↗
54. T. Leutbecher, E. Fehling, Crack Formation and Tensile Behavior of UHPC Reinforced with a Combination of Rebars and Fibers, in: Proceedings of the second International Symposium on Ultra High Performance Concrete, Kassel University Press, Kassel, Germany, 2008, pp. 497–504.
55. R. Karl-Heniz, G. Stefan, Tests on ultra-high Performance fiber reinforced concrete designing hot-water tanks and UHPERC-shells, in: Proceedings of the International Symposium on Ultra High Performance Concrete, Kassel, Germany, 2004, pp. 361–374.
56. L.P. Hasen, Building system with joints of high-strength reinforced concrete, in: Proceedings of the 2nd International Conference on structural and Construction Engineering: System-based Vision for Strategic and Creative Design, Rome, 2003, V.2, pp. 1097–1102.
57. J. Jungwirth, A. Muttoni, Structural behavior of tension members in UHPC, in: Proceedings of the International symposium on Ultra High Performance Concrete, Kassel, Germany, 2004, pp. 533–544.
58. S.A. Firas, F. Gilles, L. Robert, Bond between carbon fiber-reinforced Polymer (CFRP) bars and ultra high performance fiber reinforced concrete (UHPFRC): experimental study, Constr. Build. Mater., V.25 (2) (2010) 479–485.10.1016/j.conbuildmat.2010.02.006 ↗
59. K.M.A. Hossain, M. Lachemi, Bond behavior of self-consolidating concrete with mineral and chemical admixtures, J. Mater. Civil Eng., ASCE, 20 (9) (September 2008).10.1061/(ASCE)0899-1561(2008)20:9(608) ↗
60. Y.L. Zhang, C.D. Li, Nano-Structured Technology and Nano-Structured Plastics, China Ligh Industry Press, Beijing, China, 386 (9) (2002) 8–15.
61. ASTM C234-91a, Standard Test Method for Comparing Concretes on the Basis of the Bond Developed with Reinforcing Steel, ASTM Annual Book of Standards, Section 4, Construction, Philadelphia.
62. RILEM, Technical Recommendations for the Testing and Use of Construction Materials: RC6, Bond Test for Reinforcement Steed, 2.Pull-out Test, 1970.
63. M.A. Jianxin, H. Schneider, Properties of Ultra-High-Performance Concrete, in: LACER N 7, 6th International Symposium on Utilization of High Strength/High Performance Concrete, Germany, 2002.
64. Bond strength of reinforcement steel in self-compacting concrete
65. ANSYS Analysis User’s Manual, Version 17.0.
66. ABAQUS Analysis User’s Manual, Version 6.14-5, 2017.
67. Behavior of ultra high performance concrete structures