journal article·2013-03

One way RC wall panels with openings strengthened with CFRP

Bashar S. Mohammed, L.W. Ean, M.A. Malek

Publisher page

Abstract

Abstract The urgent need for an opening in the reinforced concrete (RC) walls after the construction for doors, windows and essential services causes local cracking around the opening which leads to decrease in load carrying capacity (LCC). Therefore, strengthening the vicinity of the opening is essential to restore the loss in LCC of RC wall with cut-out opening. Sixteen of 1/3 scale RC walls with openings comprising four identical series of four specimens each were prepared and tested. Different sizes of openings were provided in the walls as percentage of total wall area: 5%, 10%, 20% and 30%. Series one and two designated as WO1–WO4 and WO1a–WO4a, respectively, are tested without Carbon Fiber Reinforced Polymer (CFRP), while series three and four designated as WO1b–WO4b and WO1c–WO4c, respectively, are tested with CFRP strengthened the vicinity of the openings with two different patterns. To resemble imperfections in constructions, the panels were subjected to a uniformly distributed axial load with an eccentricity of t/6. New constants have been incorporated in the empirical formula developed by Saheb and Desayi [1] to predict the ultimate load of one-way RC wall with opening strengthened by CFRP. In addition, this paper also reports the stress concentration factors around the openings and introduced a factor called strengthening factor to evaluate the increment in the LCC rate of RC wall with opening strengthened by CFRP. The results show that RC walls with openings strengthened by CFRP applied in 45° to the opening corners failed at load higher than failure load of their identical RC walls strengthened by CFRP applied along the opening.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials · Concrete Corrosion and Durability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Ultimate strength of RC wall panels with openings10.1061/(ASCE)0733-9445(1990)116:6(1565) ↗
2. ACI 318. Building code requirements for reinforced concrete. American Concrete Institute; 2002.
3. AS 3600. Concrete structure. Australian Standard; 2009.
4. Seddon AE. The strength of concrete walls under axial and eccentric loads. Symposium on strength of concrete structures, London; Cement and Concrete Association; 1956. p.445–86.
5. Full scale bearing strength investigation of thin wall-ribbed reinforced concrete panels
6. Review of reinforced concrete wall design formulas
7. Design of slender reinforced concrete walls with openings
8. Benayoune A, Samad AAA, Ali AAA, Abbasovich AA. Load bearing wall panels with openings, International conference on industrialized building system, Kuala Lumpur, Malaysia; 2003. p. 109–19.
9. Ultimate strength of precast concrete sandwich panel with opening under axial load
10. Ultimate load formula for reinforced concrete wall panels with openings10.1260/136943306776232954 ↗
11. CFRP strengthened openings in two-way concrete slabs-an experimental and numerical study10.1016/j.conbuildmat.2006.06.009 ↗
12. Behaviour of axially loaded fired-clay masonry panels with web openings
13. The effects of opening on the structural behavior of masonry wall subjected to compressive loading – strain variation10.2174/1874149500903010062 ↗
14. Casadei P, Ibell T, Nanni A. Experimental results of one-way slabs with openings strengthened with CFRP laminates. In: Proceedings, Fiber-reinforced polymer reinforcement for concrete structures, Singapore; FRPRCS-6; 2003, p. 1097–106.10.1142/9789812704863_0105 ↗
15. Strengthening of one-way spanning RC slabs with cutouts using FRP composites10.1016/j.conbuildmat.2008.06.005 ↗
16. FRP composites for shear strengthening of reinforced concrete deep beams with openings
17. Ultimate strength of RC wall panels in one-way in-plane action10.1061/(ASCE)0733-9445(1989)115:10(2617) ↗
18. BBK 04. Boverkets Handbok om Betongkonstruktioner, Sweden. (The Swedish Building Administration’s Handbook on Concrete Structures): The Swedish Building Administration, Division of Buildings; 2004.
19. Externally bonded FRP reinforcement for RC structures, Technical report, FIB, Bulletin 14, Task Group 9.3 FRP (Fiber Reinforced Polymer) reinforcement for concrete structures; 2001.
20. CFRP composites for strengthening of reinforced concrete walls with openings
21. Gere JM, Timoshenko SP. Mechanics of materials. 4th ed. Stanley, Thornes (Publishers) Ltd.; 1999.