journal article·2011-01

Starch as a modifier for asphalt paving materials

Al-Hadidy AI, Tan Yi-qiu, Ayman Talib Hameed

Publisher page

Abstract

Abstract This paper investigates the viability of using starch (ST) as a new modifier for asphalt paving materials. Different ratios of ST (2.5, 5.0, and 7.5% by weight of asphalt) were blended with 70/100 paving grade asphalt. Unmodified and modified asphalt binders were subjected to physicochemical, alkali, acid and fuel resistance tests. The performance tests including, Marshall stability, Marshall Quotient (MQ), tensile strength, tensile strength ratio, flexural strength, rutting resistance and resilient modulus (MR) were carried out on unmodified and modified stone matrix asphalt (SMA) mixtures. The analyses of test results show that the performance of ST-modified asphalt mixtures are better than conventional and styrene–butadiene–styrene (SBS)-modified mixtures. The rutting potential, moisture susceptibility and temperature susceptibility can be reduced by the inclusion of ST in the asphalt mixture. The laboratory MR values are lower than the calculated ones using the empirical equations. The results also revealed that this modifier can be used as anti-stripping agent. It also shows resistance to fuels and most common chemicals. A ST content of 5% by weight of asphalt is recommended for the improvement of the performance of asphalt concrete mixtures similar to that investigated in this study.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Tripathi Rakesh, Pickett Kirby, Solaimanian Mansour, Kennedy, Thomas W. US pat. 6113681; 2000.
2. Effect of polyethylene on life of flexible pavements10.1016/j.conbuildmat.2008.07.004 ↗
3. Mechanistic approach of polypropylene-modified flexible pavements10.1016/j.matdes.2008.06.021 ↗
4. Al-Hadidy AI, Tan Yi-qiu. Mechanistic analysis of ST and SBS-modified flexible pavements. Constr Build Mater, in press.
5. Ostermeyer Larry F. US pat. 5221703; 1993.
6. Reilly James M. The albumen and salted paper book. Published by Light Impressions Corporation; 1980. p. 14.
7. A laboratory study of stone matrix asphalt using ground tire rubber10.1016/j.conbuildmat.2006.02.005 ↗
8. Brown ER, Cooley LA. Designing stone matrix asphalt mixtures for rut-resistant pavements. National Cooperative Highway Research Program. Transportation Research Board. National Research Council: Washington DC, USA, Report No. 425; 1999.
9. Anon · 1992
10. Brown SF, Brunton JM. An introduction to the analytical design of bituminous pavements. 3rd ed. UK: University of Nottingham, Department of Civil Engineering; 1992.
11. Utilization of waste fibers in stone matrix asphalt mixtures10.1016/j.resconrec.2004.04.005 ↗
12. American Society for Testing and Materials (ASTM). Standard specification, Section 4, vol. 04-03; 2005.
13. Behavior of asphalt concrete mixtures with reclaimed polyethylene as additive10.1061/(ASCE)0899-1561(2007)19:6(500) ↗
14. Pacific Polymers International. Jet fuel resistant joint sealant, Elasto – Thane 200” Inc. 12271 Monarch St. Garden Grove, CA92841, Technical Data, USA; 2005.
15. Rheology of asphalts modified with glycidylmethacrylate functionalized polymers10.1016/j.jcis.2004.08.043 ↗