Mechanical properties of natural fibers reinforced sustainable masonry
Source abstract
Abstract
Abstract This research evaluates the physical and mechanical properties of Portland cement masonry blocks reinforced with lechuguilla natural fibers, that were lightened with 2-l bottles of polyethylene terephthalate. A concrete mix was designed for a target compressive strength of 16 MPa at 28 days, and slump of 70 mm. Masonry concrete blocks with dimensions of 730 × 340 × 130 mm were produced for two different fiber lengths (25 and 50 mm) and with fiber contents of 0.25%, 0.50%, 0.75% and 1.0%. Based on the obtained results, it was found that as the aspect ratio decreases the compressive strength increases and that the use of natural fiber (Vf = 0.5–0.75%) improves masonry post-cracking features, showing a ductile behavior and generating a uniform cracking pattern in the longitudinal sides of the blocks.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Structural Behavior of Reinforced Concrete
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. Fundación ICA, AC. Edificaciones de Mampostería para Vivienda, Cap. 4, Tercera Edición; 2003. p. 107–8.
2. ACI Committee 544. State-of-the-art on fiber reinforced concrete. ACI manual of concrete practice. Part 5; 1998. p. 544.1R-1–66.
3. Vegetable fibre reinforced cement composites – a false dream or a potential reality?
4. Fibras Naturales de Lechuguilla como Refuerzo en Materiales de Construcción, Escuela de Ingeniería Pontificia Universidad Católica de Chile
5. Recycling of PET10.1016/j.eurpolymj.2005.02.005 ↗
6. Effects of waste PET bottles aggregate on the properties of concrete10.1016/j.cemconres.2004.05.014 ↗
7. Recycling of plastic bottles for use as a lightweight geotechnical material, management of environmental, quality
8. Valorization of post-consumer waste plastic in cementitious concrete composites10.1016/j.wasman.2006.03.012 ↗
9. Thermal degradation kinetics of (polyethylene terephthalate) from waste soft drinks bottles10.1016/j.cej.2005.04.018 ↗
10. NMX-C-414-ONNCCE-2004. Industria de la Construcción – Cementos hidráulicos – Especificaciones y métodos de prueba. Norma Mexicana, Organismo Nacional de Normalización y Certificación de la Construcción y Edificación, SC, México, DF; 2004. p. 6–9.
11. NMX-C-111-ONNCCE-2004. Industria de la Construcción – Agregados para Concreto Hidráulico – Especificaciones y Métodos de Prueba. Norma Mexicana, Organismo Nacional de Normalización y Certificación de la Construcción y Edificación, SC, México, DF; 2004. p. 5–7.
12. Juárez CA. Concretos Base Cemento Portland Reforzados con Fibras Naturales (Agave lecheguilla), como Materiales para Construcción en México. Tesis Doctoral, Universidad Autónoma de Nuevo León; 2002.
13. ASTM C 143-00. Standard test method for slump of hydraulic-cement concrete. Philadelphia: American Society for Testing and Materials; 2000. p. 1–3.
14. ASTM C 192-98. Practice for making and curing concrete test specimens in the laboratory. Philadelphia: American Society for Testing and Materials; 1999. p. 6.
15. ASTM C 39/C39M-03. Standard test method for compressive strength of cylindrical concrete specimens. Philadelphia: American Society for Testing and Materials; 2003. p. 5.
16. ASTM C 496-96. Standard test method for splitting tensile strength of cylindrical concrete specimens. Philadelphia: American Society for Testing and Materials; 1996. p. 2–4.
17. NMX-C-036. Normas Técnicas Complementarias para Diseño y Construcción de Estructuras de Mampostería, Norma Mexicana, Organismo Nacional de Normalización y Certificación de la Construcción y Edificación, SC, México, DF; 2004. p. 47.