Flexural properties, bonding performance and splitting strength of LVL reinforced with woven glass fiber
Source abstract
Abstract
Abstract In this study, laminated veneer lumber (LVL) and reinforced LVL (RLVL) with interwoven glass fibers were produced from poplar veneers (Populus x euramericana I-214) using phenol formaldehyde as the adhesive. Tests were performed on LVL and RLVL to determine their modulus of rupture, modulus of elasticity, specific modulus of rupture, specific modulus of elasticity, tensile shear strengths, and splitting strengths. Thus, the objective of the investigation was to determine how reinforcing LVL with woven glass fibers affected its flexural properties, bonding performance and splitting strengths. The results showed that reinforcement with woven glass fibers increased the modulus of rupture and modulus of elasticity, and the splitting strength of RLVL was significantly greater than that of LVL. Another result was that the density of the reinforced LVL was increased significantly. Conversely, the reinforcement resulted in significant decreases in the specific modulus of rupture and the specific modulus of elasticity. Based on the experimental results that were obtained, it can be said that the reinforcement of LVL with woven glass fibers had some positive effects and some negative effects on the mechanical properties that were tested.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Wood Treatment and Properties · Tree Root and Stability Studies · Natural Fiber Reinforced Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Anonymous. Forest products annual market review, food and agriculture organization of the united nations. Geneva-Switzerland; 2009. p. 139–43.
2. Properties of laminated veneer lumber (LVL) made with low density hardwood species: effect of the pressure duration10.1007/s00107-007-0209-1 ↗
3. Properties of laboratory made yellow poplar (Liriodendron Tulipifera) laminated veneer lumber: effect of the adhesives10.1007/s00107-009-0333-1 ↗
4. Suitability of three hybrid poplar clones for veneer lumber manufacturing using melamine urea formaldehyde adhesive10.15376/biores.5.3.1868-1878 ↗
5. Effects of logs steaming, veneer drying and aging on the mechanical properties of laminated veneer lumber (LVL)10.1016/j.buildenv.2005.08.008 ↗
6. The effects of ply organization and loading direction on bending strength and modulus of elasticity in laminated veneer lumber (LVL) obtained from beech (Fagus orientalis L.) and Lombardy poplar (Populus nigra L.)10.1016/j.conbuildmat.2005.05.002 ↗
7. Nail and screw withdrawal strength of laminated veneer lumber made up hardwood and softwood layers10.1016/j.conbuildmat.2005.12.015 ↗
8. Applying failure criteria to the strength evaluation of 3-ply laminated veneer lumber according to grain direction by uniaxial tension test10.1016/j.conbuildmat.2010.08.002 ↗
9. Effects of press pressure on glue line thickness and properties of laminated veneer lumber glued with melamine urea formaldehyde adhesive10.15376/biores.7.3.4341-4349 ↗
10. Edge static bending properties of yellow-poplar laminated veneer lumber: effect of veneer-joint designs
11. Contribution factor of wood properties of three poplar clones to strength of laminated veneer lumber
12. The effects of some factors on the impact bending strength of laminated veneer lumber10.15376/biores.7.4.5855-5863 ↗
13. Economic feasibility of synthetic fiber reinforced laminated veneer lumber (LVL)
14. Elastic deflection of wood–fiberglass composite beams
15. Analysis of wood-fiberglass composite beams within and beyond the elastic region
16. Failure analysis of laminated timber beams reinforced with glass fibre composites10.1007/BF00705697 ↗
17. Study of strengthening solutions for glued-laminated wood beams of maritime pine wood10.1016/j.conbuildmat.2009.02.042 ↗
18. Enhancement of the flexural performance of retrofitted wood beams using CFRP composite sheets10.1016/j.conbuildmat.2007.11.005 ↗
19. TS EN 323. Wood based panels-determination of density. Turkish Standard Institution: Ankara; 1999.
20. TS 2474. Wood determination of ultimate strength in static bending. Turkish Standard Institute, Ankara: Turkey; 1976.
21. TS 2478. Wood determination of modulus of elasticity in static bending. Turkish Standard Institute: Ankara, Turkey; 1976.
22. TS 3969 EN 314-1. Plywood-bonding quality – Part 1: test methods. Turkish Standard Institution: Ankara; 1998.
23. TS 7613. Wood-determination of cleavage strength. Turkish Standard Institution: Ankara; 1989.
24. Hot-pressing stress graded aspen veneer for laminated veneer lumber (LVL)10.1515/HF.2005.002 ↗
25. Use of Brazilian eucalyptus to produce LVL panels
26. The effects of wood species, load direction, and adhesives on bending properties of laminated veneer lumber10.15376/biores.7.3.3104-3112 ↗