Influence of active crack width control on the chloride penetration resistance and global warming potential of slabs made with fly ash + silica fume concrete
Source abstract
Abstract
Abstract Service life predictions for concrete exposed to chloride-induced corrosion usually result from durability tests performed on uncracked concrete. Chloride migration coefficients for uncracked concrete should only be used if the structure can be considered as uncracked. The seemingly uncracked condition requires crack widths below 0.1 mm. The extra reinforcing steel to achieve this in concrete slabs, results in a 30–43% increase of the global warming potential. Fly ash + silica fume concrete may be preferred because of its low 28 day migration coefficient (3.4 × 10−12 m2/s), its long service life (>100 years) and its autogenous healing ability.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete Corrosion and Durability · Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Environmental impact and life cycle assessment (LCA) of traditional and ‘green’ concretes: literature review and theoretical calculations10.1016/j.cemconcomp.2012.01.004 ↗
2. Full probabilistic service life prediction and life cycle assessment of concrete with fly ash and blast-furnace slag in a submerged marine environment: a parameter study10.1504/IJESD.2012.049141 ↗
3. Fib. Fib Bulletin 34. Model code for service life design. Lausanne: Fib; 2006.
4. RCP Consulting Software. Comrel, TI, Version 8.10 [computer software]. Munich: RCP Consulting Software; 1987–2013.
5. PRé Consultants bv. SimaPro. Version 7.3.3 [computer software]. Amersfoort: PRé Consultants bv; 2011.
6. CEN. NBN EN 1992–1-1, Eurocode 2: design of concrete structures – Part 1–1: general rules and rules for buildings (+AC: 2008) (+AC: 2010). Brussels: CEN; 2005.
7. Self-crack closing ability of mortar with different additives
8. BIN. NBN B15–001. Supplement to NBN EN 206–1. Concrete – specification, performance, production and conformity. Brussels: BIN; 2004.
9. Method of the Concrete Equivalent Mortar (CEM) – a new tool to design concrete containing admixture (in French)10.1007/BF02480524 ↗
10. Mu S. Chloride penetration and service life prediction of cracked self-compacting concrete. PhD thesis. Ghent: Ghent University; 2012.
11. Quantifying the effects of crack width, tortuosity, and roughness on water permeability of cracked mortars10.1016/j.cemconres.2011.10.002 ↗
12. Water permeability and autogenous healing of cracks in concrete
13. Nordtest. NT Build 492. Concrete, mortar and cement-based repair materials: chloride migration coefficient from non-steady state migration experiments. Espoo: Nordtest; 1999.
14. Duracrete. Probabilistic performance based durability design of concrete structures: general guidelines for durability design and redesign. Gouda: CUR; 2000.
15. Critical chloride content in reinforced concrete – a review10.1016/j.cemconres.2009.08.006 ↗
16. Chloride diffusion tests as experimental basis for full probabilistic service life prediction and life-cycle assessment of concrete with fly ash in a submerged marine environment
17. ISO. ISO 14,040. Environmental management – life cycle assessment – principles and framework. Geneva: ISO; 2006.
18. Frischknecht R, Jungbluth N, editors. Overview and methodology. Final report ecoinvent v2.0 No. 1. St-Gallen: Swiss Centre for Life Cycle Inventories; 2007.
19. LCA allocation procedure used as an incitative method for waste recycling: an application to mineral additions in concrete10.1016/j.resconrec.2010.04.001 ↗
20. Chen C. A study of traditional and alternative structural concretes by means of the life cycle assessment method (in French). PhD thesis. Troyes: UTT; 2009.
21. EFCA. EFCA environmental declaration superplasticizing admixures. EFCA; 2006. (26.05.13).
22. Study of two concrete mix-design strategies to reach carbon mitigation objectives10.1016/j.cemconcomp.2009.04.001 ↗
23. Reducing environmental impact by increasing the strength of concrete: quantification of the improvement to concrete bridges10.1016/j.jclepro.2012.05.028 ↗