journal article·2013-04

Effect of curing methods on shrinkage and corrosion resistance of concrete

M. Maslehuddin, M. Ibrahim, M. Shameem, M.R. Ali, M.H. Al-Mehthel

Publisher page

Abstract

Abstract This paper reports the results of a study conducted to assess the effect of curing on shrinkage and corrosion resistance of OPC and silica fume cement concretes. The concrete specimens were cured by covering with wet burlap or applying one of the following curing compounds, water-, acrylic-, bitumen-based, or coal tar epoxy. The results indicated that the selected curing compounds were effective in decreasing the shrinkage strain and enhancing the corrosion resistance of both OPC and silica fume cement concretes. It was also noted that 3 days of wet burlap curing prior to the application of a curing compound was necessary for the OPC concrete while 7 days of wet burlap curing is required for the silica fume cement concrete.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete Corrosion and Durability · Concrete and Cement Materials Research · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Probable mechanisms of crack formation at early ages of concrete: a literature survey10.1016/0008-8846(82)90085-0 ↗
2. Kral S, Gabauer J. Shrinkage and cracking of concrete at early ages. In: Proceedings, Conference Internationale sue le Dallas en Beton, Dundee; April 1979. p. 412–20.10.1016/B978-0-08-023256-0.50053-X ↗
3. Shrinkage of plain and silica fume cement concrete under hot weather10.1016/j.cemconcomp.2007.05.006 ↗
4. Effect of type and dosage of silica fume on plastic shrinkage in concrete exposed to hot weather10.1016/j.conbuildmat.2004.04.031 ↗
5. ASTM C 876. Standard test method for half-cell potentials of uncoated reinforcing steel in concrete. Annual book of ASTM standards, v. 4.02. American Society for Testing and Materials, West Conshohocken; 2010.
6. A theoretical analysis of the slope of the polarization curves10.1149/1.2428496 ↗
7. Long-term performance of FBEC bars in chloride-contaminated concrete
8. Nancy M, Whitting A. A study of the effectiveness of Portland cement concrete curing compounds. Transportation Research Board; 2003.10.3141/1834-08 ↗
9. Membrane curing of concrete: moisture loss10.1016/0008-8846(94)90160-0 ↗
10. Assessment of the efficiency of chemical membranes to cure concrete
11. Wasserman R, Bentur A. Curing technologies, strength and durability performance. In: Proceedings, 3rd international conference on concrete repair, rehabilitation and retrofitting, ICCRRR, Cape Town; 3–5 September, 2012. p. 91–4.
12. Effect of curing environments on strength, porosity and chloride ingress resistance of blast furnace slag cement concretes: a construction site study10.1016/j.conbuildmat.2012.06.052 ↗
13. Use of a new approach (design of experiments method) to study different procedures to avoid plastic shrinkage cracking of concrete in hot climates10.3151/jact.9.149 ↗
14. Effectiveness of Portland cement concrete curing compounds10.3141/1834-08 ↗
15. Effect of curing methods on properties of plain and blended cement concretes10.1016/j.conbuildmat.2009.08.036 ↗