An analytical model for determining the relative electrical resistivity of cement paste and C–S–H gel
Source abstract
Abstract
Abstract With a combination of effective medium and percolation theory, an analytical model was proposed to acquire the relative resistivity of cement paste and C–S–H. The overall electrical resistivity and volume fraction of conductive phase, as main input values, are continuously determined by using non-contact electrical resistivity device and CEMHYD3D numerical model, respectively. The results show that an increase of hydration degree shows an improvement with the relative resistivity of solids and a reduction in critical exponent of capillary pores. While the relative resistivity of C–S–H and its exponent present constant values of 121 and 1.8, independent of hydration degree. Finally, the calculated results are compared to the reported values by previous literatures that have a good agreement.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Smart Materials for Construction · Concrete Properties and Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Rapid chloride permeability test on blended cement and other concretes: correlations between charge, initial current and conductivity10.1016/S0950-0618(98)00033-6 ↗
2. Relating rapid chloride transport parameters of concretes to microstructural features extracted from electrical impedance10.1016/j.cemconres.2010.02.016 ↗
3. Effect of crack width on chloride diffusion coefficients of concrete by steady-state migration tests10.1016/j.cemconres.2010.08.018 ↗
4. Capillary continuity or discontinuity in cement pastes
5. Percolation of capillary pores in hardening cement pastes10.1016/j.cemconres.2004.07.033 ↗
6. Multi-scale modeling of the diffusivity of mortar and concrete
7. Influence of silica fume on diffusivity in cement-based materials: II. Multi-scale modeling of concrete diffusivity10.1016/S0008-8846(00)00263-5 ↗
8. Computer simulation of the diffusivity of cement-based materials10.1007/BF01117921 ↗
9. The electrical resistivity log as an aid in determining some reservoir characteristics: transactions
10. Berechnung verschiedener Physikalischer Konstanten von heterogenen Substanzen10.1002/andp.19354160705 ↗
11. Percolation of phases in a three-dimensional cement paste microstructural model10.1016/0008-8846(91)90014-9 ↗
12. Electrical resistivity of composites10.1111/j.1151-2916.1990.tb07576.x ↗
13. Permeability and pore structure of OPC paste10.1016/S0008-8846(00)00474-9 ↗
14. Estimation of the permeability of silica fume cement concrete10.1016/j.conbuildmat.2009.08.033 ↗
15. Application of GEM equation in microstructure characterization of cement-based materials10.1061/(ASCE)0899-1561(2009)21:11(648) ↗
16. Preliminary interpretation of Portland cement hydration process using resistivity measurements
17. Early-age hydration of fresh concrete monitored by non-contact electrical resistivity measurement10.1016/j.cemconres.2007.09.027 ↗
18. Observation of microstructure formation process of cement paste using non-destructive methods10.1680/macr.11.00149 ↗
19. Bentz DP. CEMHYD3D: a three-dimensional cement hydration and microstructure development modeling package. Version 3.0.2005.10.6028/NIST.IR.7232 ↗
20. Modification of the Bogue calculation10.1680/adcr.1989.2.6.73 ↗
21. Advances in quantitative XRD analysis for clinker, cements, and cementitious additions10.1154/1.1649328 ↗
22. Determining the water–cement ratio, cement content, water content and degree of hydration of hardened cement paste: method development and validation on paste samples10.1016/j.cemconres.2009.06.013 ↗
23. Estimation of the degree of hydration of blended cement pastes by a scanning electron microscope point-counting procedure10.1016/j.cemconres.2004.01.014 ↗
24. Study on hydration of Portland cement with fly ash using electrical measurement10.1007/BF02479309 ↗
25. Capillary porosity depercolation in cement-based materials: measurement techniques and factors which influence their interpretation10.1016/j.cemconres.2011.04.006 ↗
26. Characterization of pore structure in cement-based materials using pressurization–depressurization cycling mercury intrusion porosimetry (PDC-MIP)10.1016/j.cemconres.2010.02.011 ↗
27. The assessment of porosity and pore size distribution of limestone Portland cement pastes10.1016/j.conbuildmat.2008.08.028 ↗
28. Ye · 2003
29. Prediction of diffusivity of concrete based on simple analytic equations10.1016/j.cemconres.2003.08.026 ↗
30. Modeling of the link between microstructure and effective diffusivity of cement pastes using a simplified composite model10.1016/j.cemconres.2006.06.004 ↗
31. Analysis of effective diffusivity of cement based materials by multi-scale modelling
32. Impedance spectroscopy of hydrating cement-based materials: measurement, interpretation, and application10.1111/j.1151-2916.1994.tb04507.x ↗
33. Electrical conductivity based microstructure and strength prediction of plain and modified concretes10.1007/s12572-011-0023-1 ↗
34. Stauffer · 1994
35. Electrical conductivity of two-phase composite material10.1016/S1359-6462(98)00147-X ↗
36. Powers · 1948
37. Multi-scale prediction of the effective chloride diffusion coefficient of concrete10.1016/j.conbuildmat.2011.03.041 ↗
38. Critical density in percolation processes10.1063/1.1674565 ↗
39. Modelling of the microstructure and transport properties of concrete10.1016/0950-0618(94)00019-0 ↗
40. Interpretation of impedance spectroscopy of cement paste via computer modelling10.1007/BF00356331 ↗
41. Assessment of diffusive and mechanical properties of hardened cement pastes using a multi-coated sphere assemblage model10.1016/j.cemconres.2005.07.007 ↗
42. A model for two types of calcium silicate hydrate in the microstructure of Portland cement pastes10.1016/S0008-8846(00)00257-X ↗
43. A model for the microstructure of calcium silicate hydrate in cement paste10.1016/S0008-8846(99)00209-4 ↗
44. Prediction of the diffusivity of cement-based materials using a three-dimensional spatial distribution model10.1016/j.cemconcomp.2011.11.011 ↗