journal article·2014-10

Quantitative evaluation of carbon fiber dispersion in cement based composites

Zhenjun Wang, Jie Gao, Tao Ai, Wei Jiang, Peng Zhao

Publisher page

Abstract

Abstract To date, carbon fiber cement based composites are gaining popularity in the field of civil engineering. Dispersion degree of carbon fibers (CFs) in the composites plays a significant role in the property improvements. However, it is extremely challengeable to evaluate quantitatively the dispersion of CFs because of their random distribution and low contrast with cement paste. In this paper, X-ray computed tomography (CT) scanner was adopted to capture the images; Optical Microscope (OP) was used to determine the thresholds of different components and mathematical calculation was conducted to compare the degree of fiber dispersion. The dispersion coefficient was introduced to evaluate quantitatively dispersion of the CFs. The higher value of dispersion coefficient, the more uniform distribution the CFs. The value range of dispersion coefficient is concentrated from 84% to 94%. There is no rule for changes of dispersion coefficient with the changes of scanned slices. Meanwhile, variation coefficient was calculated as an index to effectively compare the fiber dispersion for the different scanned slice with the same dispersion coefficient. In addition, the lower variation coefficient of fiber dispersion, the more uniform distribution the CFs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Smart Materials for Construction · Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Effect of aspect ratio on strain sensing capacity of carbon fiber reinforced cement composites10.1016/j.matdes.2013.05.010 ↗
2. Laboratory evaluation of tensile strength and energy absorbing properties of cement mortar reinforced with micro-and meso-sized carbon fibers10.1016/j.conbuildmat.2013.03.071 ↗
3. Durability evaluation of carbon fiber-reinforced polymer strengthened concrete beams: experimental study and design
4. Thermal and hygric parameters of carbon–fiber-reinforced cement composites after thermal and mechanical loading10.1177/1744259105057223 ↗
5. Effect of chemical vapor deposition treatment of carbon fibers on the reflectivity of carbon fiber-reinforced cement-based composites10.1016/j.compscitech.2007.08.003 ↗
6. Carbon–fiber-reinforced cement-based sensors
7. Correlation of fiber dispersion, rheology and mechanical performance of FRCs10.1016/j.cemconcomp.2006.08.006 ↗
8. Effect of carbon fiber dispersion on the mechanical properties of carbon fiber-reinforced cement-based composites10.1016/j.msea.2007.09.073 ↗
9. Characterization of fiber/matrix interface strength: applicability of different tests, approaches and parameters10.1016/j.compscitech.2004.07.003 ↗
10. Carbon fiber reinforced cement mortar improved by using acrylic dispersion as an admixture10.1016/S0008-8846(01)00599-3 ↗
11. Uniformity assessment of carbon fibers dispersion in cement paste by impedance measurements
12. Monitoring fiber dispersion in fiber-reinforced cementitious materials: comparison of AC-impedance spectroscopy and image analysis
13. Characterizing fiber dispersion in cement composites using AC-impedance spectroscopy10.1016/j.cemconcomp.2004.06.003 ↗
14. Evaluation of air void distributions of cement asphalt emulsion mixes using X-ray computed tomography scanner
15. Micro-CT investigation on fatigue damage evolution in short fibre reinforced polymers10.1016/j.compscitech.2013.02.008 ↗
16. Study on 3D spatial distribution of steel fibers in fiber reinforced cementitious composites through micro-CT technique10.1016/j.conbuildmat.2013.07.052 ↗
17. Quantitative evaluation technique of Polyvinyl Alcohol (PVA) fiber dispersion in engineered cementitious composites10.1016/j.cemconcomp.2009.04.002 ↗
18. Study on evaluation method for PVA fiber distribution in engineered cementitious composite10.3151/jact.1.265 ↗
19. GB 175-2007. Standards of Common Portland Cement in China. General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China, Beijing; 2007.
20. Three-dimensional finite element model of concrete based on CT technology
21. Three-dimensional mesoscopic numerical simulation of concrete based on CT scan
22. Micro structural image analysis applied to fiber composite materials: a review10.1016/0010-4361(93)90246-5 ↗