Structural performance of RC slabs provided by pre-cast ECC strips in tension cover zone
Source abstract
Abstract
Abstract Pre-cast and cured Engineered Cementitious Composites (ECC) strips were placed in the tension cover zone of one-way reinforced concrete (RC) slabs beside the main steel reinforcement. Using pre-cast and cured ECC mitigates issues associated with volumetric changes associated with the ECC material. In order to assess the structural performance enhancement of the new hybrid system, four point bending tests were performed on two different sizes of RC slabs. The tested slabs were geometrically similar in thickness but and differed in their width and span. Small, 300 mm wide × 900 mm long, slabs were strengthened using one 150 × 500 × 20 mm ECC strip. Larger, 300 × 2000 mm slabs were strengthened with two 150 × 1600 × 20 mm ECC strips. A small amount of conventional reinforcing steel was provided inside the ECC strips in order to enhance the strain hardening behavior of the ECC strengthening strip, and thereby increase its efficiency. The structural evaluation of the slabs considered crack width and spacing, deflection at the service load level, and ultimate capacity and ductility. Test results showed that the ECC strips enhanced the structural performance of the slabs at both service and ultimate limit states. Providing additional internal reinforcement by a reinforcing ratio of 1.88% exhibited outstanding performance in terms of decreased crack width, better crack distribution, and improved capacity and ductility compared to control slabs without internal ECC strips.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Park · 1975
2. Cracks formed in concrete around deformed tension bars
3. FRPs and FOSs lead to innovation in Canadian civil engineering structures10.1016/S0950-0618(03)00039-4 ↗
4. Ductile strengthening using externally bonded and near surface mounted composite systems10.1016/j.compstruct.2010.03.009 ↗
5. Review on bonding techniques of CFRP in strengthening concrete structures
6. Environmental durability of externally bonded FRP materials intended for repair of concrete structures10.1016/j.conbuildmat.2010.11.096 ↗
7. A damage model to predict the durability of bonded assemblies. Part I: de-bonding behavior of FRP strengthened concrete structures10.1016/j.conbuildmat.2009.10.018 ↗
8. Flexural strengthening of concrete beams with CFRP laminates bonded into slits10.1016/j.cemconcomp.2004.07.004 ↗
9. Kotynia R. Strengthening of reinforced concrete structures with near surface mounted FRP reinforcement. In: The 5th international conference, AMCM, Gliwice, 2005, Ustron; June 12–14, 2005.
10. Externally post-tensioned carbon FRP bar system for deflection control10.1016/j.conbuildmat.2007.08.002 ↗
11. Mechanical behaviors of concrete beam of external pre-stressed CFRP tendons
12. Simulation of shrinkage induced cracking in cement composite overlays10.1016/j.cemconcomp.2003.04.001 ↗
13. Post-cracking behavior of steel fiber reinforced concrete10.1007/BF02480574 ↗
14. From micromechanics to structural engineering: the design of cementitious composites for civil engineering applications
15. High-early-strength ECC for rapid durable repair: material properties
16. Tailoring ECC for special attributes: a review10.1007/s40069-012-0018-8 ↗
17. Engineered cementitious composites for structural applications
18. Effect of fiber reinforcement on the response of structural members10.1016/j.engfracmech.2006.01.027 ↗
19. Li VC. Reflections on the research and development of engineered cementitious composites (ECC). In: Proceedings of the JCI international workshop on ductile fiber reinforced cementitious composites (DFRCC) – application and evaluation, DFRCC-2002, Takayama, Japan; October 21–22, 2002. p. 1–21.
20. On engineered cementitious composities (ECC), a review of the material and its applications10.3151/jact.1.215 ↗
21. Structural performance of beam elements with PVA-ECC
22. Li VC, Fischer G. Reinforced ECC – an evolution from materials to structures. In: Proceedings on CD, Session 5, Paper K-13, Fib 2002, Osaka, Japan; 2002.
23. Deformation behavior of fiber-reinforced polymer reinforced engineered cementitious composite (ECC) flexural members under reversed cyclic loading conditions
24. Intrinsic response control of moment resisting frames utilizing advanced composite materials and structural elements
25. Li VC, Li M. Durability performance of ductile concrete structures. In: Proceedings of the 8th international conference on creep, shrinkage and durability of concrete and concrete structures, Ise-Shima, Japan; 2008. p. 761–8.10.1201/9780203882955.ch102 ↗
26. Transport properties of engineered cementitious composites under chloride exposure
27. Cracking and healing of engineered cementitious composites under chloride environment
28. Spagnoli · 2009
29. Buzzini · 2006
30. Wang S, Li VC. Tailoring of pre-existing flaws in ECC matrix for saturated strain hardening. In: Proceedings of FRAMCOS-5; 2004. p. 1005–12.
31. Evaluation of shrinkage induced cracking performance of low shrinkage engineered cementitious composite by ring tests10.1016/j.compositesb.2013.03.012 ↗
32. EN 1992-1-1. Eurocode 2: design of concrete structures – Part 1-1: general rules and rules for buildings. Brussels: European Committee for Standardization (CEN); December 2004.
33. CEB-FIP · 2010
34. Egyptian code for design and construction of reinforced concrete structures (ECP 203-2007); 2007.
35. Efficient strengthening technique to increase the flexural resistance of existing RC slabs10.1061/(ASCE)1090-0268(2008)12:2(149) ↗
36. Failure mode analysis of reinforced concrete beams strengthened in flexure with externally bonded fiber-reinforced polymers10.1061/(ASCE)1090-0268(2004)8:2(123) ↗
37. Bazant · 1998
38. Bazant · 2002
39. Alam SY, Loukili A. Etude des effets d’échelle sur la propagation des fissures dans le béton par la technique de corrélation d’images, Rencontres AUGC, Saint-Malo, France; 2009.
40. Fracture energy approach for predicting cracking of reinforced concrete tensile members
41. American Concrete Institute · 2011
42. Minimum reinforcement in high-strength concrete10.1061/(ASCE)0733-9445(1990)116:2(427) ↗
43. Fracture mechanics analysis of high strength concrete