journal article·2012-06

Improved mechanical properties of CFRP laminates at elevated temperatures and freeze–thaw cycling

Marco Di Ludovico, Filomena Piscitelli, Andrea Prota, Marino Lavorgna, Giuseppe Mensitieri, Gaetano Manfredi

Publisher page

Abstract

Externally bonded Fiber Reinforced Polymer (FRP) laminates are recognized as an effective system to repair or strengthen existing structures in the field of buildings. Despite the evident advantages of FRPs over traditional materials, the greatest impediment to worldwide utilization is represented by the limited knowledge of composites behavior at elevated temperature and/or freeze-thaw cycling exposure. In order to investigate this aspect, a series of mechanical tests have been carried out on innovative epoxy based-matrices and on carbon FRP coupons exposed to different temperature and humidity conditions in an environmental chamber. Since commercially available resins exhibit a reduced capacity to transfer loads over fibers around glass transition temperature (T-g) which, for cold-cured systems (i.e. systems cured around the ambient temperature), is somewhat comparable to the operating temperature, the innovative matrices have been formulated with the aim to attain T-g values significantly higher than those exhibited by presently used epoxy based-systems. The strategy adopted for the formulation of such resins is based on the key idea that for cold-cured epoxy resin, it is essential to increase the exothermal cross-linking reaction heat allowing the curing reaction in the bulk of the material to be carried out at temperatures higher than ambient temperature. The results of Differential Scanning Calorimetry (DSC), Dynamic-Mechanical Analysis (DMA) and Thermo-Gravimetric Analysis (TGA) as well as results of tension tests on FRP laminates subjected to severe operating conditions are presented and widely discussed in this paper. The experimental results pointed out that the innovative epoxy-based formulations provide significant improvements on the mechanical properties of FRP laminates exposed to elevated temperatures or to freeze-thaw cycles.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Fire effects on concrete materials · Mechanical Behavior of Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Fiber-reinforced polymer composite for construction—state-of the- art review10.1061/(ASCE)1090-0268(2002)6:2(73) ↗
2. Low-temperature and freeze-thaw durability of thick composites10.1016/1359-8368(96)00007-8 ↗
3. Tensile properties of CFRP and hybrid FRP composites at elevated temperatures10.1177/0021998308099224 ↗
4. Deuring M. Brandversuche an nachtraglich verstarkten Tragern aus Beton. Research Report EMPA No. 148’795. Swiss Federal Laboratories for Materials Testing and Research. Switzerland; 1994.
5. Blontrock H, Taerwe L, Vandevelde P. Fire tests on concrete beams strengthened with fibre composite laminates. Third Ph.D. Symposium. Vienna, Austria; 2000.
6. Blontrock H, Taerwe L, Vandevelde P. Fire Testing of concrete slabs strengthened with fibre composite laminates. In: The fifth annual symposium on fibre-reinforced-plastic reinforcement for concrete structures (FRPRCS-5). London; 2001. p. 547–56.
7. Effect of fire on concrete cylinders confined with GFRP
8. Bisby LA. Fire behaviour of FRP reinforced or confined concrete. PhD Thesis, Department of Civil Engineering, Queen’s University, Kingston, Canada; 2003. 371 pp.
9. Williams BK. Fire performance of FRP-strengthened reinforced concrete flexural members. PhD Thesis, Department if Civil Engineering, Queen’s University, Kingston, Canada; 2004. 389 pp.
10. American Concrete Institute (ACI) Committee 440. Guide for the design and construction of externally bonded FRP systems strengthening concrete structures. ACI 440.2R-08. Farmington Hills, MI: ACI; 2008.
11. Foster SK, Bisby LA. High temperature residual properties of externally bonded FRP systems for concrete. In: Proceedings of the 7th international symposium on fiber reinforced polymers for reinforced concrete structures. Farmington Hills, MI: American Concrete Institute; 2005. p. 1235–52.
12. Structural recovery in a model epoxy: comparison of responses after temperature and relative humidity jumps10.1021/ma025930c ↗
13. Richard D. Schile, Ridgefield, CT (US). Epoxy hardeners for low temperature curing. US Patent, 6987,161 B2 January 17; 2006.
14. Wet lay-up manufactured Frp’s for concrete and masonry repair. Influence of water on the properties of composites and of their epoxy components10.1061/(ASCE)CC.1943-5614.0000132 ↗
15. Ellis B. The kinetics of cure and network formation, In: Ellis B. editor. Chemistry and Technology of Epoxy Resins, Chapter 3, Blakie, London; 1993.10.1007/978-94-011-2932-9 ↗
16. Isothermal curing of an epoxy resin by alternating differential scanning calorimetry10.1016/S0040-6031(99)00033-7 ↗
17. Curing of epoxy systems at sub-glass tarnsition temperature10.1002/app.22548 ↗
18. Barra G, Lavorgna M, Mensitieri G, Piscitelli F. Fiber-reinforced polymers, epoxy-based polymeric compositions and uses thereof. US Patent 12/943,270 filed November 10, 2010 and European Patent EP10190435.7 filed November 09; 2010.
19. ASTM D 3039/D 3039M. Standard test method for tensile properties of polymer matrix composite materials; April 10 2000.
20. Enthalpy relaxation in a partially cured epoxy resin10.1002/(SICI)1099-0488(19960130)34:2<229::AID-POLB3>3.0.CO;2-O ↗
21. Hygrothermal effects of epoxy resin. Part I: the nature of water in epoxy10.1016/S0032-3861(98)00790-3 ↗
22. Vibrational spectroscopy evidence for the dual nature of water sorbed into epoxy resins10.1021/cm9906809 ↗
23. Procedures conditioning the absorption/desorption behavior of cold-cured epoxy resins10.1002/polb.21466 ↗
24. Molecular interactions in and transport properties of densely cross-linked network: a time resolved FT-IR spectroscopy investigation of the epoxy/H2O system10.1021/ma040008j ↗
25. Hygrothermal effects of epoxy resin. Part II: variations of glass transition temperature10.1016/S0032-3861(98)00791-5 ↗
26. ACI 440.3R – 2004. Guide Test Methods for Fiber-Reinforced Polymers (FRPs) for Reinforcing or Strengthening Concrete structures. American Concrete Institute, Farmington Hills; 2004.