journal article·2015-04Open access

Characterization of lightweight ferrocement panels containing expanded perlite-based mortar

Burak Işıkdağ

Abstract

In this study, the deflection and cracking of lightweight ferrocement panels (LFPs) containing expanded perlite based mortar (EPBM) was investigated. For this purpose, twelve LFPs with one or two layers of wire mesh were produced with two different mix designs (M1, M2), and LFPs were subjected to four point loading flexural test. In this test, the first cracking load and ultimate load of LFPs varied depending on the number of the layers and types of wire mesh used in the LFP. The optimum LFP was determined as LFP-D1 containing EPBM2. In addition; compressive and flexural tests were conducted on EPBM specimens, and the characteristics of EPBM were investigated by SEM/EDS, XRD, TG/DTA and BET analysis. It was observed that the compressive strength of EPBM improved as the cement ratio increased. The use of expanded perlite (EP) as aggregate expedited the start of micropore formation in mortar. This led to a decrease in the strength and unit weight of EPBM.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Structural Behavior of Reinforced Concrete

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. An experimental study on ferrocement box-beams under flexural loading
2. Experimental study on light weight ferrocement beam under monotonic and repeated flexural loading
3. Flexural behavior of lightweight ferrocement sandwich composite beams
4. Strength and behavior of lightweight ferrocement-aerated concrete sandwich blocks
5. Ferrocement encased lightweight aerated concrete: a novel approach to produce sandwich composite
6. Manufacture of high heat conductivity resistant clay bricks containing perlite10.1016/j.buildenv.2006.10.016 ↗
7. Effect of expanded perlite aggregate on the properties of lightweight concrete10.1016/j.jmatprotec.2007.10.052 ↗
8. The effects of expanded perlite aggregate, silica fume and fly ash on the thermal conductivity of lightweight concrete10.1016/S0008-8846(02)01032-3 ↗
9. Performance of ferrocement panels in different environments10.1016/S0008-8846(02)01003-7 ↗
10. Guide for the design, construction, and repair of ferrocement
11. Study on corrosion durability of ferrocement
12. Structural integrity of ferrocement panels exposed to fire10.1016/j.cemconcomp.2007.08.007 ↗
13. Effect of arrangements of reinforcements on mechanical properties of ferrocement
14. Flexural response of ferrocement with fibrous cementitious matrices10.1016/j.conbuildmat.2006.06.021 ↗
15. Ferrocement for infrastructure rehabilitation
16. Ultimate and service behavior of ferrocement roof slab panels10.1016/j.conbuildmat.2004.04.034 ↗
17. Experimental and analytical investigation of ferrocement-concrete composite beams10.1016/j.cemconcomp.2003.08.003 ↗
18. Experimental and numerical analysis of large ferrocement water tanks10.1016/S0958-9465(02)00014-8 ↗
19. Advanced interaction of high tensile performance of thin plate composites ferrocement-grouted mortar
20. Flexural behavior of hybrid ferrocement slabs with microconcrete and fibers
21. Ferrocement box sections-viable option for floors and roof of multi-storey buildings
22. Experimental validation of a theoretical model for flexural capacity of hybrid ferrocement slab
23. Bending response of hybrid ferrocement plates with meshes and fibers
24. Experimental investigation of ultimate capacity of wire mesh-reinforced cementitious slabs10.1016/j.conbuildmat.2010.06.032 ↗
25. Study on flexural behaviour of ferrocement slabs reinforced with pvc-coated weld mesh
26. An experimental investigation on the flexural behavior of SCC ferrocement slabs incorporating fibers
27. Mechanical behaviour of ferrocement composites: an experimental investigation10.1016/S0958-9465(99)00011-6 ↗
28. Gambhir · 2004
29. Expanded perlite aggregate characterization for use as a lightweight construction raw material
30. ASTM C349-08 · 2008
31. ASTM C348-08 · 2008
32. Preparation and thermal properties of paraffin/expanded perlite composite as form-stable phase change material10.1016/j.matlet.2013.06.105 ↗
33. Compressive strength and microstructural analysis of fly ash/palm oil fuel ash based geopolymer mortar under elevated temperatures10.1016/j.conbuildmat.2014.04.064 ↗
34. Comparative performance of geopolymers made with metakaolin and fly ash after exposure to elevated temperatures10.1016/j.cemconres.2007.08.021 ↗
35. Study of the substitution of limestone filler with pozzolanic additives in mortars10.1016/j.conbuildmat.2008.08.034 ↗
36. The effect of mechanically and chemically activated fly ashes on mortar properties10.1016/j.fuel.2006.03.031 ↗
37. Effect of silica fume and expanded perlite addition on the technical properties of the fly ash–lime–gypsum mixture10.1016/j.conbuildmat.2007.01.011 ↗
38. Experimental study on thermo-mechanical properties of polymer modified mortar10.1016/j.matdes.2013.05.055 ↗
39. Use of perlite as a pozzolanic addition in producing blended cements10.1016/j.cemconcomp.2006.07.018 ↗
40. New lightweight colemanite-added perlite brick and comparison of its physicomechanical properties with other commercial lightweight materials10.1016/j.conbuildmat.2014.03.031 ↗