Utilization of the sludge derived from dyestuff-making wastewater coagulation for unfired bricks
Source abstract
Abstract
Abstract The object of this work was to explore the feasibility of using the sludge derived from dyestuff-making wastewater coagulation for the preparation of unfired bricks with four typical cements including Portland cement, ground silicate cement clinker, alumina cement and slag cement. The interaction between the sludge and cement were studied based on X-ray diffraction, thermal analyses, compressive strength measurements, freeze–thaw tests and leaching tests. The experimental results showed that the cement solidified sludge was capable of reaching all performance criteria for unfired bricks at a cement/dry sludge/water ratio of 1:0.5–0.8:0.5–0.8. The compressive strengths of alumina cement solidified sludge overpass 40 MPa, higher than those of other cement solidified sludges. It is expected that the unfired bricks of the sludge and alumina cement can be used for the pave of pedestrian road.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Textile wastewater reuse as an alternative water source for dyeing and finishing processes: a case study10.1016/j.desal.2010.04.002 ↗
2. Stabilisation and solidification of sewage sludges with Portland cement10.1016/S0008-8846(00)00363-X ↗
3. Hydration characteristics of waste sludge ash that is reused in eco-clinkers10.1016/j.cemconres.2004.11.014 ↗
4. Engineering properties of unfired clay masonry bricks10.1016/j.enggeo.2009.05.002 ↗
5. Design thermal values for unfired clay bricks10.1016/j.matdes.2009.07.011 ↗
6. Compressive strength and micro-structural analysis of unfired clay masonry bricks10.1016/j.enggeo.2009.08.010 ↗
7. Interactions between shrinkage reducing admixtures (SRA) and cement paste’s pore solution10.1016/j.cemconres.2007.12.005 ↗
8. Durability of masonry systems: a laboratory study10.1016/j.conbuildmat.2005.07.008 ↗
9. Solidification/stabilization of arsenic containing solid wastes using Portland cement, fly ash and polymeric materials10.1016/j.jhazmat.2005.06.046 ↗
10. Stabilization of chromium-bearing electroplating sludge with MSWI fly ash-based Friedel matrices10.1016/j.jhazmat.2008.10.078 ↗
11. Effect of magnesium oxychloride cement on stabilization/solidification of sewage sludge10.1016/j.conbuildmat.2009.08.011 ↗
12. New applications of calcium sulfoaluminate cement10.1016/j.cemconres.2003.10.019 ↗
13. Fundamental aspects of cement solidification and stabilization10.1016/S0304-3894(96)01805-5 ↗
14. Overview of waste stabilization with cement10.1016/j.wasman.2006.01.020 ↗
15. Properties of stabilized/solidified admixtures of cement and sewage sludge10.1016/j.cemconcomp.2006.08.005 ↗
16. Effect of inorganic materials on the solidification of heavy metal sludge10.1016/S0008-8846(03)00146-7 ↗
17. Alternative calcium-sulfate-bearing materials as cement retarders: part II. FGD gypsum10.1016/j.cemconres.2004.03.021 ↗
18. Thermal treatment and utilization of flue gas desulphurization gypsum as an admixture in cement and concrete10.1016/j.conbuildmat.2007.04.001 ↗
19. Use of waste gypsum to replace natural gypsum as set retarders in Portland cement10.1016/j.wasman.2008.11.014 ↗
20. Effects of flue gas desulphurization sludge on the pozzolanic reaction of reject-fly-ash-blended cement pastes10.1016/j.cemconres.2004.02.027 ↗
21. Environmental impact and management of phosphogypsum10.1016/j.jenvman.2009.03.007 ↗
22. Investigation on phosphogypsum–steel slag–granulated blast-furnace slag–limestone cement10.1016/j.conbuildmat.2009.12.006 ↗
23. Activation of rejected fly ash using flue gas desulphurization (FGD) sludge10.1007/BF02838400 ↗
24. Waste gypsum–blast furnace slag cement in mortars with granulated slag and silica sand as aggregates10.1016/j.conbuildmat.2009.02.032 ↗