Saturation level of the superficial zone of concrete and adhesion of repair systems
Source abstract
Abstract
Abstract Appropriate surface saturation level is essential for the durability of the repaired structure. The repair material is often blamed for “not sticking”, although the general source of the trouble lies with the substrate surface conditioning. An extensive research project has been undertaken to develop specifications and performance criteria for surface preparation of concrete substrates. A field test was developed to evaluate the optimum moisture conditioning of the substrate concrete prior to application of repair material; this has been calibrated and compared with destructive and non-destructive on three types of concrete and two types of surface preparation. In order to evaluate different saturation levels, concrete samples have been stored in more than 12 modes of conservation. Finally, repair mortars have been applied on concrete substrates and adhesion was measured for different concrete surface saturation levels. Initial Surface Absorption Test (ISAT) can be used as an attractive quantitative test to evaluate saturation level of concrete substrate. Moreover, it is clearly shown that saturation levels higher than 50% and lower than 90% are requested for promoting adhesion of PCC mortars.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete Corrosion and Durability · Innovative concrete reinforcement materials · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Courard L, Degeimbre R, Darimont A, Wiertz J. Influence of composition of repairing mortars on adhesion. In: van Gemert D, editor. Proceedings of the VIII international congress on polymers in concrete (KULeuven en KVIV), Oostende, 1995. p. 119–24.
2. Pareek SN. Improvement in adhesion of polymeric repair and finish materials for reinforced concrete structures. Doctorate Dissertation, Nihon University, College of Engineering (Japan); 1993. 182p.
3. Courard L, Degeimbre R, Darimont A, Wiertz J. Hygro-thermal application conditions and adhesion. In: Seidler P, editor. Proceedings of the fifth international colloquium industrial floors ’03 (Technische Akademie Esslingen), Ostfildern/Stuttgart; 2003. p 137–42.
4. Courard L, Darimont A. Appetency and adhesion: analysis of the kinetics of contact between concrete and repairing mortars. In: Katz A, Bentur A, Alexander M, Arliguie G, editors. Proceedings of the RILEM international conference, interfacial transition zone in cementitious composites. Haïfa: E&FN Spon; 1998. p 185–94.
5. Courard L, Degeimbre R, Darimont A, Wiertz J. Effects of sunshine/rain cycles on the behaviour of repair systems. In: Ohama Y, Puterman M, editors. ISAP 99, proceedings of the 2nd international RILEM symposium on adhesion between polymers and concrete, Dresden, 1999. p. 511–21.
6. Concrete removal techniques: influence on residual cracking and bond strength
7. Courard L. How to analyse thermodynamic properties of solids and liquids in relation with adhesion? In: Ohama Y, Puterman M, editors. ISAP 99, proceedings of the 2nd international RILEM symposium on adhesion between polymers and concrete, Dresden; 1999. p. 9–20.
8. Parametric study for the creation of the interface between concrete and repair products10.1007/BF02481698 ↗
9. Courard L, Degeimbre R, Wiertz J. The behaviour of coatings on concrete substrates in relation with different forms of water attack. In: Gjorv OE, Sakai K, Banthia N, editors. CONSEC ‘98, proceedings of the 2nd international conference on concrete under severe conditions. Tromso: E&FN Spon; 1998. p. 997–1006.
10. Contact angles and adhesive bonding10.1016/0143-7496(92)90045-W ↗
11. Courard L, Degeimbre R, Darimont A, Wiertz J. Effects of environment on repair materials: results of a five-year research project. In: Malhotra VM, editor. Proceedings of the sixth canmet/ACI international conference on durability of concrete (SP212-57), Thessaloniki; 2003. p. 921–40.
12. Courard L, Degeimbre R, Wiertz J, Van de Put M. Analysis of the resistance to water of the interface between concrete and repairing systems: experimental approach. In: Gjorv OE, Sakai K, Banthia N, editors. E &FN SponCONSEC ‘98, proceedings of the 2nd international conference on concrete under severe conditions, Tromso; 1998. p. 988–96.
13. Evaluation of thermodynamic properties of concrete substrates and cement slurries modified with admixtures10.1007/BF02533583 ↗
14. The relationship between the strength of an adhesive bond and the thermodynamic properties of its component10.1016/0143-7496(87)90022-4 ↗
15. The thermodynamics and wetting of real surfaces and their relationship to adhesion10.1016/0143-7496(93)90017-4 ↗
16. Permeability testing on site concrete. A review of methods and experience. Concrete society technical report, 31. London: Concrete Society Working Party; 1987.
17. A capillary suction test for a better knowledge of adhesion process in repair technology10.1139/l03-061 ↗
18. Courard L, Lenaers JF. Evaluation of saturation and microcracking of the superficial zone of concrete: new developments. In: Alexander et al., editor. Proceedings of the ICCRRR08 international congress on concrete repair, reinforcement and retrofitting 2009. London, Cape Town: Taylor & Francis Group; 2008. p. 977–82.10.1201/9781439828403.ch137 ↗
19. CNS Electronics Ltd., Autoclam.
20. Justnes H. Capillary suction of water by polymer cement mortars. In: van Gemert D, KULeuven en KVIV, editors. Proceedings of the RILEM symposium on properties and test methods for concrete–polymer composites, Oostende; 1995. p. 29–37.