journal article·2016-06

Non-destructive assessment of both mean strength and variability of concrete: A new bi-objective approach

Maitham Alwash, Zoubir Mehdi Sbartaï, Denys Breysse

Publisher page

Abstract

Abstract Using non-destructive techniques (NDT) like rebound hammer in combination with destructive techniques (DT) like core test is a common practice. Two approaches are widely used to produce a model for assessing the concrete strength. The first approach consists in fitting a specific model between NDT measurements and cores using the regression analysis. The second approach uses a prior model which is calibrated according to measured core strengths. The EN 13791 and ACI standards require a large number of cores to estimate mean concrete strength and concrete strength variability and consequently to calculate the characteristic strength value which depends on these two inputs. In this work, we propose a new approach for identifying the models based on NDT and DT tests in order to capture both mean strength and concrete strength variability. This approach is first illustrated by synthetic simulations which are a good way to study a problem having many degrees of freedom. The proposed approach is then tested on a real data set. In both cases, it is confirmed that the common approaches are able to estimate the mean strength but they fail, even with a large number of cores, to accurately estimate the concrete variability and hence the characteristic strength. Reversely, the new approach shows its high efficiency in capturing the concrete variability (in addition to the mean strength) with a number of cores lower than that prescribed by the standards.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Non-Destructive Testing Techniques · Ultrasonics and Acoustic Wave Propagation · Infrastructure Maintenance and Monitoring

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. S.P. Pessiki (chair). In-place methods to estimate concrete strengths. ACI 228.1R-03 report; 2003.
2. Estimation of the in situ concrete strength: provisions of the European and Italian seismic codes and possible improvements
3. Turkey’s grand challenge: disaster-proof building inventory within 20 years
4. Assessment of compressive strength of concrete by cylinders, cores and nondestructive tests
5. J. Cook (chair). Guide for obtaining cores and interpreting compressive strength results. ACI 214.4R-03, 2003.
6. An experimental study on the within-member variability of in situ concrete strength in RC building structures10.1016/j.conbuildmat.2013.05.102 ↗
7. Assessment of in situ characteristic concrete strength10.1016/j.conbuildmat.2013.02.041 ↗
8. Assessment of In Situ Compressive Strength in Structures and Precast Concrete
9. Nondestructive evaluation of concrete strength: an historical review and new perspective by combining NDT methods10.1016/j.conbuildmat.2011.12.103 ↗
10. Assessing concrete strength with rebound hammer: review of key issues and ideas for more reliable conclusions10.1617/s11527-013-0139-9 ↗
11. Comparing investigation approaches and NDT methodologies for concrete strength estimation: an international benchmark
12. Non-destructive strength evaluation of concrete: analysis of some key factors using synthetic simulations10.1016/j.conbuildmat.2015.09.023 ↗
13. Amélioration de la méthodologie d’évaluation non destructive de la résistance mécanique du béton dans les structures existantes
14. Analysis of key influent factors of investigation for NDT concrete strength estimation in relation with an international benchmark
15. Montgomery · 2003
16. Ross · 2009
17. DeCoursey · 2003
18. Fitting straight lines when both variables are subject to error10.1080/00224065.1984.11978881 ↗
19. A two stage procedure for assessment of in situ concrete strength using combined non-destructive testing10.1007/BF02482712 ↗
20. Predictive models for evaluating concrete compressive strength in existing buildings
21. Reinforced concrete structure: nondestructive in situ strength assessment of concrete10.1016/j.conbuildmat.2014.11.023 ↗
22. Rebound hammer, pulse velocity and core tests in self-consolidating concrete
23. Reliability of nondestructive tests for on site concrete strength
24. The use of combined non-destructive testing methods to determine the compressive strength of concrete10.1007/BF02475246 ↗
25. 50 years of experience with the Schmidt rebound hammer
26. Concrete strength by combined nondestructive methods simply and reliably predicted10.1016/S0008-8846(00)00226-X ↗
27. Constructing a mathematical models to predict compressive strength of concrete from non-destructive testing
28. Study on the introduction into Italy on the combined non-destructive method, for the determination of in situ concrete strength10.1007/BF02478819 ↗
29. Determination of concrete quality in a structure by combination of destructive and non-destructive methods10.1007/BF02472458 ↗
30. Standard errors: a review and evaluation of standard error estimators using Monte Carlo simulations10.20982/tqmp.10.2.p107 ↗