Synthesis and characterization of mortars with circulating fluidized bed combustion fly ash and ground granulated blast-furnace slag
Source abstract
Abstract
Abstract The purpose of this study to investigate the synthesis and characterization of cement-based composites with circulating fluidized bed combustion (CFBC) fly ash and ground granulated blast-furnace slag (GGBFS). Firstly, CFBC fly ash shall be examined to confirm to the chemical and physical requirements according to ASTM C821 -09. Secondly, the properties of mortars mixed with cement, CFBC fly ash and GGBFS as cementitious materials were explored. Test results showed that CFBC fly ash does not comply with the chemical and physical requirements in ASTM C821 -09 (Standard specification for lime for use with pozzolans), but accords with the requirements of ASTM C593 -11 (Specification for fly ash and other pozzolans for use with lime for soil stabilization). Based on the test results, CFBC fly ash has the potential replacement of partial cementing materials and as an alternative of pozzolan. The initial setting time of mortars increases with an increasing amount of cement replacement by CFBC fly ash and GGBFS. The compressive strength of mortars with GGBFS and CFBC fly ash is lower than that of ordinary Portland cement (OPC) mortar. The more the CFBC fly replaces OPC, the less the compressive strength obtains. Meanwhile, CFBC fly ash would results in a higher length change when adding up to 30%. In terms of engineering property, environment and economic, the amount of OPC replacement by CFBC fly ash was recommended to be limited below 20%, while by GGBFS it was recommended to be limited below 70%.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Advances in alternative cementitious binders10.1016/j.cemconres.2010.11.012 ↗
2. Engineering properties and durability of high-strength self-compacting concrete with no-cement SFC binder10.1016/j.conbuildmat.2015.12.163 ↗
3. Utilization of fly ash coming from a CFBC boiler co-firing coal and petroleum coke in Portland cement10.1016/j.fuel.2007.02.018 ↗
4. Utilization of circulating fluidized bed fly ash in preparing non-autoclaved aerated concrete production10.1016/j.conbuildmat.2013.06.033 ↗
5. Synthesis of geopolymer composites from blends of CFBC fly and bottom ashes10.1016/j.fuel.2012.02.059 ↗
6. Sulfation phenomena in fluidized bed combustion systems10.1016/S0360-1285(00)00021-6 ↗
7. The physical–chemical characterization of mechanically-treated CFBC fly ash10.1016/j.cemconcomp.2007.08.006 ↗
8. Characteristics of CFBC fly ash and properties of cement-based composites with CFBC fly ash and coal-fired fly ash10.1016/j.conbuildmat.2014.05.057 ↗
9. Effect of circulating fluidized bed combustion ash on the properties of roller compacted concrete10.1016/j.cemconcomp.2013.10.001 ↗
10. Utilization and efficiency of ground granulated blast furnace slag on concrete properties – a review10.1016/j.conbuildmat.2015.12.153 ↗
11. Compressive strength of masonry grout containing high amounts of class F fly ash and ground granulated blast furnace slag10.1016/j.conbuildmat.2015.07.115 ↗
12. Engineering properties of cementless concrete produced from GGBFS and recycled desulfurization slag10.1016/j.conbuildmat.2014.04.017 ↗
13. Mindess · 2003
14. Mehta · 2006
15. Performance and microstructural examination on composition of hardened paste with no-cement SFC binder10.1016/j.conbuildmat.2014.11.032 ↗
16. Effect of admixtures on the setting times of high-strength concrete10.1016/S0958-9465(00)00025-1 ↗
17. Binary and ternary effects of ground dune sand and blast furnace slag on the compressive strength of mortar10.1016/j.cemconcomp.2012.03.002 ↗
18. The properties of the self-compacting concrete with fly ash and ground granulated blast furnace slag mineral admixtures10.1016/j.jclepro.2015.02.050 ↗
19. An experimental study on optimum usage of GGBS for the compressive strength of concrete10.1016/j.cemconcomp.2007.01.001 ↗
20. Influence of circulating fluidized bed combustion (CFBC) fly ash on properties of modified high volume low calcium fly ash (HVFA) cement paste10.1016/j.conbuildmat.2015.05.075 ↗
21. Potential use of stockpiled circulating fluidized bed combustion ashes in controlled low strength material (CLSM) mixture10.1016/j.conbuildmat.2009.10.022 ↗
22. Electron microscopy and phase analysis of fly ash from pressurized fluidized bed combustion10.1016/j.cemconres.2003.08.011 ↗
23. Hydration of combustion ashes – a chemical and physical study10.1016/S0016-2361(00)00158-7 ↗
24. A selective hydration treatment to enhance the utilization of CFBC ash in concrete
25. ASTM C 618-12 · 2012
26. ASTM C821-09 · 2009
27. ASTM C192/C192M-07 · 2007
28. ASTM C593-11 · 2011
29. ASTM C109-11 · 2011
30. ASTM D1157-09 · 2009
31. ASTM C 39-14 · 2014
32. ASTM C403-08 · 2008
33. Effect of GGBFS on setting, workability and early strength properties of fly ash geopolymer concrete cured in ambient condition10.1016/j.conbuildmat.2014.05.080 ↗
34. The effect of powder type on the setting time and self compactability of mortar10.1016/j.conbuildmat.2012.04.079 ↗
35. Effects of mineral admixtures on fresh and hardened properties of self-compacting concretes: binary, ternary and quaternary systems10.1617/s11527-007-9242-0 ↗
36. Investigations of anhydrite in CFBC fly ash as cement retarders10.1016/j.conbuildmat.2012.11.056 ↗
37. Hydration of alkali-activated ground granulated blast furnace slag10.1023/A:1004742027117 ↗
38. A study on creep and drying shrinkage of high performance concrete10.1016/S0008-8846(01)00539-7 ↗
39. Properties of self-consolidating concrete made with high volumes of supplementary cementitious materials10.1061/(ASCE)MT.1943-5533.0000733 ↗
40. ASTM C596 · 2009