journal article·2016-12

Structural response of thin-walled circular steel tubular columns filled with demolished concrete lumps and fresh concrete

Xin-Yu Zhao, Bo Wu, Long Wang

Publisher page

Abstract

Abstract A straightforward use of coarsely-crushed demolished concrete lumps (DCLs) mixing with fresh concrete (FC) has recently been suggested by the authors and co-investigators, with a desire to provide another option for recycling concrete waste. Due to their being free of strong, costly crushing, the DCLs termed herein are characterized by larger size than conventional recycled aggregates. Bearing in mind this salient feature, the proposed recycling approach is easy to follow: a pre-determined percentage of DCLs, along with FC of complementary amount, can be placed in layers into a hollow steel tube, thereby forming a new structural member named steel tubular column filled with DCLs and FC. Field practice has demonstrated constructability of the proposed columns, as well as their advantages of being low-impact and cost-effective. In this research, several aspects pertaining to the structural response of said columns under concentric and eccentric loadings are addressed. An experimental program was first carried out, which comprised 24 intermediately slender thin-walled circular steel tubular columns filled with DCLs and FC, accompanied by 12 reference columns filled with FC alone. Primary test variables were the replacement ratio of FC by DCLs, the eccentricity of loading, and the thickness of steel wall. It was observed that, despite a noticeable reduction on ultimate strength, the overall structural performance of the proposed columns was not dramatically compromised, even though as much as 40% of FC was replaced by DCLs. Subsequently, a three-dimensional finite-element model is developed, attempting to understand the effect of random spatial distribution of DCLs on the ultimate strength of the columns, with the aid of Monte Carlo simulation technique. Stochastic simulations indicate that heterogeneous locations of DCLs lead to variations in the ultimate resistance, but such effect is generally limited in a probabilistic sense. This implies that when designing the columns concerned, a homogenization-based estimate of the resulting compressive strength of concrete infill may be reasonable and adequate, irrespective of the locations of DCLs. To examine this, lastly, a code-based design discussion is made, involving comparisons between analytical predictions using design provisions and experimental results of 111 pertinent column tests. A unified, simplified and more robust recommendation for determining the axial and axial-flexural capacities of the proposed columns is accordingly suggested, relying upon a strength-reduction factor of 0.9.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Recycled Aggregate Concrete Performance · Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (95)

Show source-provided references
1. An overview of study on recycled aggregate concrete in China (1996–2011)10.1016/j.conbuildmat.2011.12.074 ↗
2. Vázquez · 2012
3. Properties of concretes produced with waste concrete aggregate10.1016/j.cemconres.2003.12.019 ↗
4. Study on the influence of attached mortar content on the properties of recycled concrete aggregate10.1016/j.conbuildmat.2008.04.012 ↗
5. Properties of recycled aggregate concrete made with recycled aggregates with different amounts of old adhered mortars10.1016/j.matdes.2014.01.044 ↗
6. Hansen · 1992
7. Fathifazl · 2008
8. Punching behaviour of concrete slabs incorporating coarse recycled concrete aggregates10.1016/j.engstruct.2015.06.011 ↗
9. Structural performance of recycled aggregate in CSP slab subjected to flexure load10.1016/j.conbuildmat.2016.04.086 ↗
10. Shear capacity evaluation of steel reinforced recycled concrete (RRC) beams10.1016/j.engstruct.2010.12.025 ↗
11. An experimental study on shear strength of reinforced concrete beams with 100% recycled concrete aggregate10.1016/j.conbuildmat.2013.12.019 ↗
12. Flexural testing of reinforced concrete beams with recycled concrete aggregates10.14359/51686622 ↗
13. Structural reliability of eccentrically-loaded sections in RC columns made of recycled aggregate concrete10.1016/j.engstruct.2010.08.015 ↗
14. Compressive behavior of reinforced concrete columns with recycled aggregate under uniaxial loading10.1016/j.engstruct.2012.03.037 ↗
15. Behaviour of beam-column joints made of recycled-aggregate concrete under cyclic loading10.1016/j.conbuildmat.2010.11.072 ↗
16. Seismic performance of frame structures with recycled aggregate concrete
17. Shake-table model tests on recycled aggregate concrete frame structure
18. Flexural load tests of full-scale recycled aggregates concrete structures10.1016/j.conbuildmat.2015.10.023 ↗
19. Strength and drift capacity of squat recycled concrete shear walls under cyclic loading10.1016/j.engstruct.2015.06.025 ↗
20. Property of recycled concrete column encased by steel tube subjected to axial compression
21. Experimental behaviour of recycled aggregate concrete filled steel tubular columns10.1016/j.jcsr.2006.02.010 ↗
22. Testing and analysis of axially loaded normal-strength recycled aggregate concrete filled steel tubular stub columns10.1016/j.engstruct.2015.01.007 ↗
23. Seismic performance of steel-reinforced recycled concrete columns under low cyclic loads10.1016/j.conbuildmat.2013.06.019 ↗
24. Recycled aggregate concrete (RAC) – comparative analysis of existing specifications10.1680/macr.2008.62.5.339 ↗
25. Primary study on recycled-concrete-segment filled steel tubular members
26. Behavior of FRP-confined compound concrete containing recycled concrete lumps
27. Test on flexural behavior of reinforced concrete beams filled with demolished concrete lump
28. Test on shear behavior of reinforced concrete beams filled with demolished concrete lumps
29. Behavior of reinforced concrete beams filled with demolished concrete lumps10.12989/sem.2011.40.3.411 ↗
30. Experimental study on the behavior of recycled-concrete-segment/lump filled steel tubular stub columns subjected to concentrically axial load
31. Axial behavior of thin-walled steel stub columns filled with demolished concrete segment/lump
32. Full-scale axial loading tests of concrete-filled steel tubular columns incorporating demolished concrete lumps
33. Cyclic behavior of thin-walled square steel tubular columns filled with demolished concrete lumps and fresh concrete10.1016/j.jcsr.2012.05.003 ↗
34. Cyclic testing of thin-walled circular steel tubular columns filled with demolished concrete blocks and fresh concrete10.1016/j.tws.2013.01.008 ↗
35. Size effect on compressive behaviours of normal-strength concrete cubes made from demolished concrete blocks10.1680/macr.13.00053 ↗
36. Compressive behaviors of cylindrical concrete specimens made of demolished concrete blocks and fresh concrete10.1016/j.conbuildmat.2013.11.071 ↗
37. Compressive behaviors of cubes and cylinders made of normal-strength demolished concrete blocks and high-strength fresh concrete10.1016/j.conbuildmat.2015.01.027 ↗
38. Zhao · 2012
39. AIJ · 1997
40. AISC 360-10 · 2010
41. Noncompact and slender circular CFT members: experimental database, analysis, and design10.1016/j.jcsr.2014.11.005 ↗
42. Analysis and design of noncompact and slender CFT beam-columns
43. Han · 2007
44. CECS 03-2007 · 2007
45. Eurocode 4, Design of composite steel and concrete structures, part 1. 1: general rules and rules for building, BS EN 1994-1-1: 2004, British Standards Institution, London (UK), 2004.
46. Evaluation of ductility of structures and structural assemblages from laboratory testing10.5459/bnzsee.22.3.155-166 ↗
47. Experimental study of high strength concrete-filled circular tubular columns under eccentric loading10.1016/j.jcsr.2010.11.017 ↗
48. Analytical modeling of bending of circular concrete-filled steel tubes10.1016/j.engstruct.2012.04.028 ↗
49. Park · 1975
50. Seismic behavior and modeling of high-strength composite concrete-filled steel tube (CFT) beam-columns10.1016/S0143-974X(01)00099-2 ↗
51. ABAQUS 6.10-1, Dassault Systemes Simulia Corp., Providence, RI, USA, 2010.
52. Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements10.1016/0008-8846(76)90007-7 ↗
53. Consistent tangent formulation for 3D interface modeling of cracking/fracture in quasi-brittle materials10.1016/j.cma.2008.01.011 ↗
54. Computational implementation of the PPR potential-based cohesive model in ABAQUS: Educational perspective10.1016/j.engfracmech.2012.02.007 ↗
55. Monte Carlo simulation of complex cohesive fracture in random heterogeneous quasi-brittle materials10.1016/j.ijsolstr.2009.04.013 ↗
56. Monte Carlo simulation of complex cohesive fracture in random heterogeneous quasi-brittle materials: a 3D study10.1016/j.ijsolstr.2010.04.031 ↗
57. Monte Carlo simulations of mesoscale fracture modelling of concrete with random aggregates and pores10.1016/j.conbuildmat.2014.09.069 ↗
58. An open source program to generate zero-thickness cohesive interface elements10.1016/j.advengsoft.2014.04.002 ↗
59. Cohesive zone models: a critical review of traction-separation relationships across fracture surfaces10.1115/1.4023110 ↗
60. Zhang · 2014
61. Statistical prediction of fracture parameters of concrete and implications for choice of testing standard10.1016/S0008-8846(01)00723-2 ↗
62. Finite element modeling of debonding failures in FRP-strengthened RC beams: a dynamic approach10.1016/j.compstruc.2015.05.023 ↗
63. Local buckling and concrete confinement of concrete-filled box columns under axial load10.1016/j.jcsr.2012.06.006 ↗
64. Probabilistic three-dimensional finite element study on composite beams with steel trapezoidal decking10.1016/j.jcsr.2012.10.003 ↗
65. Validated finite element techniques for quasi-static cyclic response analyses of braced frames at sub-member scales10.1016/j.engstruct.2015.07.049 ↗
66. Efficient generation of densely packed convex polyhedra for 3D discrete and finite-discrete element methods10.1002/nme.4429 ↗
67. 3D numerical modelling of projectile penetration into rock-rubble overlays accounting for random distribution of rock-rubble10.1016/j.ijimpeng.2013.08.010 ↗
68. Mang · 1995
69. Z.P. Bažant, B.H. Oh. Model of Weak Planes for Progressive Fracture of Concrete and Rock. Report No. 83–2/428m, Center for Concrete and Geomaterials, Northwestern University, Evanston, Ill., Feb., 1983.
70. Microplane model M4 for concrete. I: formulation with work-conjugate deviatoric stress10.1061/(ASCE)0733-9399(2000)126:9(944) ↗
71. Microplane model M4 for concrete. II: algorithm and calibration10.1061/(ASCE)0733-9399(2000)126:9(954) ↗
72. Microplane model M7 for plain concrete. I: formulation10.1061/(ASCE)EM.1943-7889.0000570 ↗
73. Modelling triaxial compression using the Microplane formulation for low confinement10.1016/S0045-7949(02)00057-3 ↗
74. Microplane constitutive model M4L for concrete. II: Calibration and validation10.1016/j.compstruc.2013.06.009 ↗
75. ACI 318-11 · 2011
76. A plastic-damage model for concrete10.1016/0020-7683(89)90050-4 ↗
77. Plastic-damage model for cyclic loading of concrete structures10.1061/(ASCE)0733-9399(1998)124:8(892) ↗
78. Performance of concrete-filled thin-walled steel tubes under pure torsion10.1016/j.tws.2007.01.008 ↗
79. Seismic performance of CFST column to steel beam joints with RC slab: analysis10.1016/j.jcsr.2010.07.002 ↗
80. Strength of circular concrete-filled tubes with and without internal reinforcement under combined loading10.1061/(ASCE)ST.1943-541X.0000788 ↗
81. Behaviour of recycled aggregate concrete filled stainless steel stub columns10.1617/s11527-013-0061-1 ↗
82. Modelling of recycled aggregate concrete-filled steel tube (RACFST) beam-columns subjected to cyclic loading10.12989/scs.2015.18.1.213 ↗
83. Finite element analysis of punching shear of concrete slabs using damaged plasticity model in ABAQUS10.1016/j.engstruct.2015.04.016 ↗
84. CEB-FIP, CEB-FIP Model Code 90, Thomas Telford Ltd., London, UK, 1993.
85. Crack band theory for fracture of concrete
86. Wolfram Research. Mathematica, Version 9.0. Champaign, Wolfram Research, Inc., Illinois, USA, 2013.
87. Statistical analysis of slender composite beam-column strength10.1061/(ASCE)0733-9445(1992)118:5(1312) ↗
88. Experimental study on medium long concrete filled steel tubular columns with recycled concrete subjected to axial compression
89. H.L. Guo. Performance Study on Axial Compression of Built of Large-scale Block in Thin-walled Circular Steel-concrete Short Columns, Master thesis, Inner Mongolia University of Science & Technology, Baotou, China, 2015, [in Chinese].
90. H.F. Zhang, Research on mechanical properties of large-scale block recycled concrete filled thin-walled steel tubular long columns under axial compression, Master thesis, Inner Mongolia University of Science & Technology, Baotou, China, 2015, [in Chinese].
91. DBJ/T 13–51-2010, Technical specification for concrete-filled steel tubular structures, Department of Construction of Fujian Province, Fuzhou (China), 2010, [in Chinese].
92. Perea · 2010
93. Strength and stiffness of circular concrete-filled tubes10.1061/(ASCE)ST.1943-541X.0000263 ↗
94. Composite columns – 1819 tests on concrete-filled steel tube columns compared with Eurocode 4
95. Accuracy of AISC methods in predicting flexural strength of concrete-encased members10.1061/(ASCE)ST.1943-541X.0000640 ↗