Performance of geopolymer high strength concrete wall panels and cylinders when exposed to a hydrocarbon fire
Source abstract
Abstract
This study presents an investigation of the effect of hydrocarbon fire exposure on the residual compressive strength properties of geopolymer concrete panels and cylinders. Gladstone flyash was utilized as the binder whilst the alkaline solution/fly-ash ratio and sodium silicate to sodium hydroxide (Na2SiO3/ NaOH) ratio was 0.4 and 2.5 respectively. The compressive strength at the test date was 64 MPa. Two different cylindrical specimens’ sizes (150 and 100 mm diameter x 300 and 200 mm high) were exposed on all sides to the hydrocarbon fire scenario for 120 min whilst panels of 1075 x 1075 x 200 mm were exposed on one side for the same time duration. Results showed that no significant spalling occurred in any of the specimens and the mass loss during heating was between 2.70 and 4.65% respectively which was attributed due to moisture loss. Low differential gradients and thermal incompatibility between the geopolymer paste and aggregates provides geopolymer concrete with superior spalling resistance than Ordinary Portland cement concrete. Residual compressive strength testing showed that the panels maintained approximately 60% of their initial compressive strength indicating that geopolymer concrete specimens can maintain sufficient load bearing capacity in the event of fire exposure. The residual strength profiles indicated that specimen size effect was also exhibited with the remaining strength of the cylinders being approximately 10 and 20% for the 100 mm and 150 mm dimeter specimens respectively. The dull red color exhibited in all specimens after fire testing indicated the presence of high iron content in the geopolymer matrix. Insitu temperature analysis showed that the geopolymer concrete had excellent heat resistance capabilities with temperatures at a depth of 100 mm from the exposed surface ranging between 39 °C and 45 °C after 30 min of fire exposure even though the temperature at exposed surface exceeds 1000 °C. This is reinforced by the fact that the geopolymer has a high heat storage capacity as indicated by the geopolymers lower thermal diffusivity than OPC concrete.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Fire effects on concrete materials · Engineering and Material Science Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Synthesis of new high-temperature geopolymers for reinforced plastics/composites
2. The role of inorganic polymer technology in the development of ‘green concrete’10.1016/j.cemconres.2007.08.018 ↗
3. T. Glasby, et al., EFC geopolymer concrete aircraft pavements at Brisbane West Wellcamp Airport, in: Concrete Institute of Australia Conference, 27th, 2015, Melbourne, Victoria, Australia, 2015.
4. G. Institute, World’s first public building with structural Geopolymer Concrete. Available from: , 2013.
5. The effect of ionic contaminants on the early-age properties of alkali-activated fly ash-based cements10.1016/S0008-8846(01)00724-4 ↗
6. Reduction in wear of metakaolinite-based geopolymer composite through filling of PTFE10.1016/j.wear.2004.11.001 ↗
7. Chemical stability of cementitious materials based on metakaolin10.1016/S0008-8846(99)00074-5 ↗
8. Thermal conductivity of metakaolin geopolymers used as a first approximation for determining gel interconnectivity10.1021/ie060187o ↗
9. Effects of alkali solutions on corrosion durability of geopolymer concrete10.12989/acc.2014.2.2.109 ↗
10. Review of mechanical properties of HSC at elevated temperature10.1061/(ASCE)0899-1561(1998)10:1(58) ↗
11. Spalling of normal strength concrete walls in fire
12. Researching explosive spalling
13. Spalling of high-strength silica fume concrete in fire
14. Fire-resistant aluminosilicate composites10.1002/(SICI)1099-1018(199703)21:2<67::AID-FAM596>3.0.CO;2-N ↗
15. Fire resistance of geopolymer concrete produced from Elazığ ferrochrome slag10.1002/fam.2348 ↗
16. Mechanical properties of geopolymer concrete exposed to dynamic compression under elevated temperatures10.1016/j.ceramint.2015.11.055 ↗
17. Fire endurance of steel reinforced fly ash geopolymer concrete elements10.1016/j.conbuildmat.2015.04.054 ↗
18. Compressive strength of fly-ash-based geopolymer concrete at elevated temperatures10.1002/fam.2240 ↗
19. Effect of fire exposure on cracking, spalling and residual strength of fly ash geopolymer concrete10.1016/j.matdes.2014.06.059 ↗
20. Geopolymer and Portland cement concretes in simulated fire10.1680/macr.9.00110 ↗
21. Effects of elevated temperatures on the thermal behavior and mechanical performance of fly ash geopolymer paste, mortar and lightweight concrete10.1016/j.conbuildmat.2013.09.047 ↗
22. Compressive strength and microstructural analysis of fly ash/palm oil fuel ash based geopolymer mortar under elevated temperatures10.1016/j.conbuildmat.2014.04.064 ↗
23. Slag based geopolymer for passive fire protection of tunnels
24. Several properties of mineral admixtured lightweight mortars at elevated temperatures10.1002/fam.1030 ↗
25. Effect of aggregate size on spalling of geopolymer and Portland cement concretes subjected to elevated temperatures10.1016/j.conbuildmat.2012.04.120 ↗
26. Effect of elevated temperatures on geopolymer paste, mortar and concrete10.1016/j.cemconres.2009.10.017 ↗
27. Production of alkali activated mortar from bottom ash [In Turkish]
28. McNulty · 2009
29. Damage behavior of geopolymer composites exposed to elevated temperatures10.1016/j.cemconcomp.2008.08.001 ↗
30. Comparative performance of geopolymers made with metakaolin and fly ash after exposure to elevated temperatures10.1016/j.cemconres.2007.08.021 ↗
31. Heat resistance of geopolymer materials prepared using class F fly ash
32. Fire-resistant geopolymer produced by granulated blast furnace slag10.1016/S0892-6875(03)00008-6 ↗
33. Standard · 2009
34. Fly ash-based geopolymer concrete
35. International · 2010
36. Influence of mineral additive type on slump-flow and yield stress of self-consolidating mortar
37. Concrete Technology
38. On the development of fly ash-based geopolymer concrete
39. Methods of testing concrete. Method 9: Compressive strength tests: Concrete, mortar and grout specimens
40. BSI, Actions on Structures. Part 1–2: General Actions – Actions on Structures Exposed to Fire, vol. 5, European Committee for Standardization: Brussels, 1991.
41. Influence of In-situ Pore Pressures and Temperatures on Spalling of Reinforced Concrete Walls Subjected to Fire
42. Residual strength properties of sodium silicate alkali activated slag paste exposed to elevated temperatures10.1617/s11527-009-9546-3 ↗
43. Kaviany · 2011
44. Welty · 1974
45. Approaches for the assessment of the residual strength of concrete exposed to fire
46. Mechanical properties of high-strength concrete after fire10.1016/j.cemconres.2003.11.007 ↗