journal article·2017-06Open access

Weathering’s beneficial effect on waste-stabilised rammed earth: a chemical and microstructural investigation

Alessandro Arrigoni, Renato Pelosato, Giovanni Dotelli, Christopher T.S. Beckett, Daniela Ciancio

Abstract

The most common method to improve the mechanical properties of a rammed earth mix is to add chemical stabilisers like cement and/or lime. Varying the stabiliser type will affect strength gain but also the environmental impact. In this paper, the effect of wetting-drying cycles on the long-term unconfined compressive strength of stabilised rammed earth (SRE) mixes was investigated through the chemical characterisation of the soil components and microstructural analyses. The mixes were stabilised using different agents characterised by distinct environmental impacts, such as cement, calcium carbide residue and fly ash. These last two are considered waste materials, significantly affecting their use's associated environmental implications. The results of this experimental campaign support others in this series of work and showed an improvement of the mechanical properties after cyclic wetting-drying due to the formation of new hydration products which bound particles together. The use of waste materials proved to be an effective solution to stabilise RE.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hygrothermal properties of building materials · Recycling and utilization of industrial and municipal waste in materials production · Building materials and conservation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (70)

Show source-provided references
1. The strength of unstabilised rammed earth materials10.1680/geot.2007.00129 ↗
2. The future and the common ground, Rammed Earth Construction
3. Rammed earth in the modern world, Rammed Earth Construction
4. Rammed earth in a concrete world, Rammed Earth Construction
5. Pflughoeft-Hassett · 2000
6. Greening stabilized rammed earth: devising more sustainable dosages based on strength controlling equations10.1016/j.jclepro.2013.11.041 ↗
7. Soil stabilisation using alkaline activation of fly ash for self compacting rammed earth construction10.1016/j.conbuildmat.2012.06.037 ↗
8. Physical, mechanical and thermal performance of cement-stabilized rammed earth-rice husk ash walls10.1061/(ASCE)MT.1943-5533.0000439 ↗
9. Eires · 2012
10. Compressive strength of blood stabilized earthen architecture
11. Earth blocks stabilized by cow-dung10.1617/s11527-016-0808-6 ↗
12. Experimental study on properties of rammed earth blended with GGBS and silica flume10.15623/ijret.2016.0505054 ↗
13. A. Arrigoni, A.-C. Grillet, R. Pelosato, G. Dotelli, C.T.S. Beckett, M. Woloszyn, D. Ciancio, Reduction of rammed earth's hygroscopic performance under stabilisation: an experimental investigation, Build. Environ. (in press, DOI: 10.1016/j.buildenv.2017.01.034).
14. A comprehensive review on the applications of coal fly ash10.1016/j.earscirev.2014.11.016 ↗
15. Conti · 2016
16. Heidrich · 2013
17. Stabilisation of clayey soils with high calcium fly ash and cement10.1016/j.cemconcomp.2004.02.019 ↗
18. Little · 2000
19. Cement stabilised rammed earth. Part A: compaction characteristics and physical properties of compacted cement stabilised soils10.1617/s11527-010-9658-9 ↗
20. Lime stabilization of clay minerals and soils10.1016/0013-7952(96)00028-2 ↗
21. Factors influencing the plasticity and strength of lime-soil mixtures
22. Role of curing temperature in progress of lime-soil reactions10.1007/s10706-003-3157-5 ↗
23. Optimum lime content identification for lime-stabilised rammed earth10.1016/j.conbuildmat.2013.11.077 ↗
24. Croft · 1964 · 1169
25. Carbide lime and industrial hydrated lime characterization10.1016/j.powtec.2009.05.017 ↗
26. Strength of sustainable non-bearing masonry units manufactured from calcium carbide residue and fly ash10.1016/j.conbuildmat.2014.08.033 ↗
27. Behavior of compacted soil-fly ash-carbide lime mixtures10.1061/(ASCE)1090-0241(2001)127:9(774) ↗
28. Improving rammed warth walls's sustainability through Life Cycle Assessment (LCA)
29. Chequered earth construction in south-western France10.1016/j.culher.2014.07.002 ↗
30. Unstabilized rammed earth: characterization of material collected from old constructions in south portugal and comparison to normative requirements10.1080/15583058.2012.683133 ↗
31. Rammed earth sample production: context, recommendations and consistency10.1016/j.conbuildmat.2003.11.001 ↗
32. Houben · 1994
33. Impact of relative humidity on the mechanical behavior of compacted earth as a building material10.1016/j.conbuildmat.2016.01.027 ↗
34. Standards Australia · 2009
35. Standards Australia · 2003
36. Standards Australia · 2006
37. Standards Australia · 1997
38. ASTM · 2015
39. Standards Australia · 2003
40. Recommendations for the Selection, Stabilization, and Compaction of Soil for Rammed Earth Wall Construction10.3992/jgb.5.1.101 ↗
41. Standards Australia · 2009
42. Effect of compaction water content on the strength of cement-stabilized rammed earth materials10.1139/cgj-2013-0339 ↗
43. First exploratory study on the ageing of rammed earth material10.3390/ma8010001 ↗
44. Durability of cement-stabilised rammed earth: a case study in Western Australia10.1080/14488353.2015.1092671 ↗
45. ASTM · 2015
46. Weathering and durability of earthen materials and structures
47. Fitzmaurice · 1958
48. Experimental investigation on the compressive strength of cored and molded cement-stabilized rammed earth samples10.1016/j.conbuildmat.2011.08.070 ↗
49. Stabilization of a clayey soil with fly ash and lime: a micro level investigation10.1007/s10706-012-9532-3 ↗
50. Characteristic properties of cement-stabilized rammed earth blocks10.1061/(ASCE)MT.1943-5533.0001170 ↗
51. Strength and microstructure of cement stabilized clay
52. Stabilization of expansive soil by lime and fly ash10.1007/BF02838423 ↗
53. Strength development in silty clay stabilized with calcium carbide residue and fly ash10.1016/j.sandf.2013.06.001 ↗
54. Analysis of strength development in cement-stabilized silty clay from microstructural considerations10.1016/j.conbuildmat.2010.03.011 ↗
55. Effect of moisture content on the mechanical characteristics of rammed earth10.1016/j.conbuildmat.2013.12.067 ↗
56. Cement stabilised rammed earth. Part B: compressive strength and stress–strain characteristics10.1617/s11527-010-9659-8 ↗
57. Activation of fly ash and its effects on cement properties10.1016/S0008-8846(98)00178-1 ↗
58. Investigations on the fly ash-calcium hydroxide reactions10.1016/0008-8846(89)90067-7 ↗
59. Neville · 1995
60. Effects of lime and cement treatment on the physicochemical, microstructural and mechanical characteristics of a plastic silt10.1016/j.enggeo.2013.09.012 ↗
61. Self-healing ability of fly ash–cement systems10.1016/j.cemconcomp.2008.12.009 ↗
62. Pozzolana and pozzolanic cements
63. Influence of soil gradation, proportion and combination of admixtures on the properties and durability of CSEBs10.1016/j.conbuildmat.2016.02.023 ↗
64. Chemical model for cement-based materials: temperature dependence of thermodynamic functions for nanocrystalline and crystalline C-S–H phases10.1016/j.cemconres.2009.12.004 ↗
65. Effect of supplementary cementitious materials on the compressive strength and durability of short-term cured concrete10.1016/j.cemconres.2003.08.017 ↗
66. The long-term performance of two fly ash stabilized fine-grained soil subbases10.1016/j.resconrec.2009.11.007 ↗
67. Influence of wet-dry cycles on compressive strength of calcium carbide residue-fly ash stabilized clay10.1061/(ASCE)MT.1943-5533.0000853 ↗
68. Impact of cyclic wetting–drying on swelling behavior of lime-stabilized soil10.1016/j.buildenv.2005.10.035 ↗
69. Valorization of fly ash in the cold stabilization of clay materials10.1016/0921-3449(95)00038-0 ↗
70. Durability against wetting–drying cycles of sustainable Lightweight Cellular Cemented construction material comprising clay and fly ash wastes10.1016/j.conbuildmat.2014.12.025 ↗