Evaluation of bio-binder modified asphalt’s adhesion behavior using sessile drop device and atomic force microscopy
Source abstract
Abstract
Abstract Bio-binder is a renewable material which can be derived from natural resources. Applications of bio-binder in enhancing asphalt’s properties have gained profound progresses in past several years. However, limitation still exists in our knowledge on adhesion property of asphalt blended with bio-binder. This study aims to characterize adhesion behavior of bio-binder modified asphalt using sessile drop device (SDD) and atomic force microscopy (AFM). Relationship between the two test results is also investigated. It is shown that addition of bio-binder would introduce different impacts on surface properties for different base asphalts (Pen30 and Pen70 asphalts in this paper), which may be attributed to distinct compatibilities between bio-binder and different asphalts. And the work of adhesion data demonstrates that the bio-binder enhances the interaction between basalt and bio-binder modified Pen70 asphalt binders while depress the interaction between basalt and bio-binder modified Pen30 asphalt binders. It is also found that AFM adhesive force is tip-dependent which may be interpreted using different contact mechanics. In this paper, the high coefficient of variation in soft tip’s data may result from the capillary force and contamination during scanning. Interestingly, dispersive surface free energy and AFM results show some reasonable agreements for modified Pen70 asphalts, though there is still a gap between these two methods’ results. It is speculated that the variations between surface free energy method and AFM measurement can be attributed to the differences in probe substance, test scale and measured components. Findings in this paper not only promote the development of bio-binder modified asphalt, but also shed lights of the application of AFM in characterization of asphalt’s adhesion property.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Natural Fiber Reinforced Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Aging influence on rheology properties of petroleum-based asphalt modified with bio-binder10.1061/(ASCE)MT.1943-5533.0000712 ↗
2. Alternative materials for sustainable transportation
3. Asphalt binders blended with a high percentage of biobinders: aging mechanism using FTIR and rheology10.1061/(ASCE)MT.1943-5533.0001117 ↗
4. Laboratory evaluation of waste cooking oil-based bioasphalt as a sustainable binder for hot mix asphalt10.1061/(ASCE)MT.1943-5533.0000713 ↗
5. High temperature properties of rejuvenating recovered binder with rejuvenator, waste cooking and cotton seed oils10.1016/j.conbuildmat.2014.02.032 ↗
6. Tang · 2010
7. Energy and cost analyses of biodiesel production from waste cooking oil10.1016/j.rser.2014.01.067 ↗
8. Chemical characterization of biobinder from swine manure: sustainable modifier for asphalt binder10.1061/(ASCE)MT.1943-5533.0000237 ↗
9. Evaluation of asphalt mixtures containing renewable binder technologies
10. Laboratory evaluation of asphalt mixtures that contain biobinder technologies
11. Mechanical performance of asphalt mixtures modified by bio-oils derived from waste wood eesources10.1016/j.conbuildmat.2013.11.017 ↗
12. Thermo-mechanical behaviour of mixtures containing bio-binders10.1080/14680629.2013.774758 ↗
13. Rheological and chemical characterization of biobinders from different biomass resources10.3141/2505-16 ↗
14. D.N. Little, A. Bhasin, Using Surface Energy Measurements to Select Materials for Asphalt Pavement. Nchrp Web Document, 2006.
15. Nanoscale evaluation of moisture damage in polymer modified asphalts10.1061/(ASCE)MT.1943-5533.0000072 ↗
16. Characterization of adhesion and healing at the interface between asphalt binders and aggregate using atomic force microscopy10.3141/2506-11 ↗
17. Application of Sssile drop method to determine surface free energy of asphalt and aggregate10.1520/JTE20120060 ↗
18. Determination of the surface free energy of asphalt binders by sessile drop method
19. Relationship analysis between surface free energy and chemical composition of asphalt binder10.1016/j.conbuildmat.2014.08.024 ↗
20. Surface structuring of wax in complex media10.1061/(ASCE)MT.1943-5533.0001032 ↗
21. Zhang · 2010
22. Theoretical models for surface forces and adhesion and their measurement using atomic force microscopy
23. The use of AFM and surface energy measurements to investigate drug-canister material interactions in a model pressurized metered dose inhaler formulation10.1080/02786820500543316 ↗