Alkali activated materials vs geopolymers: Role of boron as an eco-friendly replacement
Source abstract
Abstract
Abstract In this paper, the influence of boron ions on the strength development and microstructure variations of fly ash-based geopolymers and alkali-activated slag (AAS) was investigated through utilizing borax-based alkali-activators. In addition to cost-effective aspects, the substitution of boron ions in geopolymer and AAS matrixes meant to minimize the downside of the silicate compounds on the environment. The binders were produced by introducing borax to alkali-activator solutions. Granulated ground blast furnace slag (GGBS) and Class F fly ash were used to produce AAS and geopolymer specimens respectively. Results showed a decline in the strength of geopolymer binder as a result of the increase in the amount of borax. However, the formation of B-O bonds in geopolymer matrices prevented an unexpected behaviour of the strength derived from an imbalance in the alkali activator solution. Substitutions of more than 60% of sodium silicate in the fly ash-based geopolymer was not reasonable. The compensatory role of boron in the strength of AAS was undeniable where even introducing more than 30% of borax led to a slight growth in the AAS strength. It was concluded that borax-based binders could be potential candidates for high volume substitution of sodium silicate in both geopolymers and AAS.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. The greening of the concrete industry10.1016/j.cemconcomp.2008.12.010 ↗
2. Geopolymer technology: the current state of the art10.1007/s10853-006-0637-z ↗
3. J. Davidovits, Inorganic Polymer, French Patent, 8117545, 1981.
4. Compressive strength, modulus of elasticity, and water permeability of inorganic polymer concrete10.1016/j.matdes.2010.05.012 ↗
5. Corrosion of steel bars induced by accelerated carbonation in low and high calcium fly ash geopolymer concretes10.1016/j.conbuildmat.2014.03.015 ↗
6. Study on engineering properties of fly ash based concrete
7. Factors affecting the suitability of fly ash as source materials for geopolymers10.1016/j.fuel.2009.09.012 ↗
8. Effect of calcium silicate sources on geopolymerization10.1016/j.cemconres.2007.11.001 ↗
9. Effects of curing temperature and NaOH addition on hydration and strength development of clinker-free CKD-fly ash binders
10. The effects of ground granulated blast-furnace slag blending with fly ash and activator content on the workability and strength properties of geopolymer concrete cured at ambient temperature10.1016/j.matdes.2014.05.001 ↗
11. Shrinkage characteristics of alkali-activated slag cements, (ASCE)
12. Synthesis of sodium and potassium aluminogermanate inorganic polymers10.1016/j.matlet.2011.04.008 ↗
13. The phase evolution of phosphoric acid-based geopolymers at elevated temperatures10.1016/j.matlet.2011.08.043 ↗
14. Development of alkali activated borosilicate inorganic polymers (AABSIP)10.1016/j.jeurceramsoc.2011.02.021 ↗
15. A. Bagheri, A. Nazari, J.G. Sanjayan, P. Rajeev. W.H. Duan, Fly ash-based boroaluminosilicate geopolymers: experimental and molecular simulations, Ceramics International, Accepted manuscript.
16. C.L., Nicholson, R.A., Fletcher, Geopolymers and methods for their production. In: W.I.P. Organisation editor. WO 2005/019130 A1, New Zealand, 2005.
17. Synthesis of heat and ambient cured one-part geopolymer mixes with different grades of sodium silicate10.1016/j.ceramint.2014.12.154 ↗
18. Distribution of oxides in fly ash controls strength evolution of geopolymers10.1016/j.conbuildmat.2014.08.016 ↗
19. ASTM standard C109/C109M – 16, 2016 · 2016
20. Compressive strength of high strength class C fly ash-based geopolymers with reactive granulated blast furnace slag aggregates designed by Taguchi method10.1016/j.matdes.2013.07.035 ↗
21. Characteristics of boroaluminosilicate geopolymers10.1016/j.conbuildmat.2014.07.087 ↗
22. High calcium fly ash geopolymer containing diatomite as additive
23. Ka-Bik · 2004
24. Effect of calcium silicate sources on geopolymerisation10.1016/j.cemconres.2007.11.001 ↗
25. Catherine Louise Nicholson, Ross Alan Fletcher, 2005, Geopolymers and methods for their production, Google patents, Publication number: WO2005019130 A1.