journal article·2017-08

Effect of mineral admixture types on the grout strength of fully-grouted rockbolts

Ahmet Teymen

Publisher page

Abstract

Abstract This paper represent the results of an experimental study handled with developed grouting materials for fully-cement-grouted ribbed rockbolts. These experimental studies cover the effects of some mineral admixtures (silica fume, blast furnace slag, fly ash etc.) on the bond characteristics between grout and rockbolts. The effect of mineral admixtures on the grout strength of fully-grouted rockbolts and block punch index (BPI) and compressive strength (CS) of the grout on the load bearing capacity (LBC) were investigated. Totally 150 rockbolt pull-out tests were performed using ten different grouts in order to investigate and improve the LBC of grouted rockbolts for five different curing times (1, 3, 7, 28 and 90 days). All grout types were prepared same ratios, and silica sand was used as fine aggregate. Grout mixtures that 15% of mineral admixtures replaced with cement by weight were prepared. The results showed that grouts produced with silica fume (SF) and metakaolin (MK) in all mixtures were yielded the highest CS and bond strength at all ages. The all strength tests of fly ash (FA) grout exhibited low values till 28 days of curing time in accordance with reference grout, but a sharp increase was observed after this period. Grouts with perlite (PRL) and blast furnace slag (BFS) showed the similar strength values according to reference grout. In conclusion, mineral admixtures can be used for high-strength and low cost grout in tunneling applications. In addition, the use of waste materials can contribute to the resolution of environmental problems.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Grouting, Rheology, and Soil Mechanics · Concrete and Cement Materials Research · Microbial Applications in Construction Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Effect of stress change on the bond strength of fully grouted cables10.1016/0148-9062(92)93662-4 ↗
2. Shear strength of Portland cement grout10.1016/S0958-9465(02)00101-4 ↗
3. B. Stillborg, Experimental investigation of steel cables for rock reinforcement in hard rock (Doctoral Thesis), 33 D, Lulea University, Sweden, 1984.
4. R.D. Reichert, W.F. Bawden, A.J. Hyett, Evaluation of design bolt bond strength for fully grouted bolt, in: Proceeding of the 93rd Annual Meeting of CIM, 1991, Vancouver.
5. The effect of rock mass confinement on the bond strength of fully grouted cable bolts10.1016/0148-9062(92)92634-O ↗
6. Visualisation of failure in a pull-out cable bolts using X-ray CT10.1016/S0950-0618(00)00075-1 ↗
7. Aldorf · 1986
8. Rock support
9. J.A. Cybulski, R.A. Mazzoni, Roof support systems continue to evolve, in: Proceeding of the 12th Annual İnstitute on Coal Mining Healthy, Safety and Research, Blackburg, Virginia, 1989, pp. 147–158.
10. Franklin · 1989
11. Effect of grout properties on the pull-out load capacity of fully grouted rock bolt10.1016/S0886-7798(02)00038-X ↗
12. A. Kılıç, Rock mass classification and reinforcement application of Tarsus-Adana-Gaziantep (TAG) motorway tunnels in Bahçe Region (Ph. D. Thesis), Cukurova University, Department of Mining Engineering, 1997.
13. Tensile and compressive strength of silica-fume cement pastes and mortars
14. Effects of fly ash and silica fume on compressive and fracture behavior of concrete10.1016/S0008-8846(97)00269-X ↗
15. High strength concrete containing natural pozzolan and silica fume10.1016/S0958-9465(00)00037-8 ↗
16. Effect of silica fume on mechanical properties of high strength concrete10.1016/S0958-9465(03)00017-9 ↗
17. Effect of pozzolanic materials and curing methods on the elastic modulus of HPC10.1016/j.cemconcomp.2004.12.005 ↗
18. Influence of mineral admixtures on the mechanical properties and corrosion of steel embedded in high strength concrete10.1016/S0167-577X(02)01136-9 ↗
19. Metakaolin as a main cement constituent: exploitation of poor Greek kaolins10.1016/j.cemconcomp.2004.02.007 ↗
20. The influence of mineral admixtures on the short and long-term performance of concrete10.1016/j.buildenv.2006.10.019 ↗
21. C. Vipulanandan, S. Sunder, Effects of meta-kaolin clay on the working and strength properties of cement grouts. In: Grouting and Deep Mixing, 2012, pp. 1739–1747.10.1061/9780784412350.0149 ↗
22. Innovative applications of superplasticizers in concrete: a review
23. Suggested method for rock anchorage testing10.1016/0148-9062(85)92329-0 ↗
24. Methods of Test for Mortar for Masonry – Part 11: Determination of flexural and compressive strength of hardened mortar (TS EN 1015–11) Turkish Standard Institution, Ankara, 2000.
25. Testing hardened concrete – Part 3: Compressive strength of test specimens (TS EN 12390–3:2009/AC.) Turkish Standard Institution, Ankara, 2012.
26. The modified block punch index test10.1139/t97-049 ↗