Influence of fineness of volcanic ash and its blends with quarry dust and slag on compressive strength of mortar under different curing temperatures
Source abstract
Abstract
Abstract In this study researchers investigated the influence of fineness of locally available basaltic volcanic ash (VA) and its blend with other potential supplementary cementitious materials (SCMs) on compressive strength of mortar. Local quarry sites and steel making industries in the eastern province of Saudi Arabia produces tons of wastes commonly known as quarry dust (QD) and electric arc furnace slag (EAFS), respectively. Including the CM, a total of 19 mortar mixtures were prepared by substituting cement with various SCMs (VA, FA, QD, EAFS), their different percentages in binary mixes, fineness of VA, and blends of ultra-fine VA with other SCMs (ternary and quaternary). After casting, specimens were subjected to different curing temperature (20, 40, and 60 °C) and moisture conditions (continuous and partially moist). Compressive strength was measured according to ASTM C 109 at ages 7, 28, and 91 days and an average value of three identical 50-mm 3 specimens was reported. The test results indicated that improved fineness of VA up to 30% mass replacement of cement demonstrated compressive strength comparable to control and reference FA mortars at all ages particularly under high curing temperatures. Moreover, a quaternary blend of ultra-fine VA (20%) with EAFS (10%) and QD (10%) produced strength higher than all other ternary and quaternary blends at all ages and comparable 91 days strength to control mortar.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Building materials and conservation · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Klee · 2009
2. U.S. Department of the Interior USGS. Mineral commodity summaries 2016, U.S. Geological Survey, Reston, Virginia, US, 2016.
3. Humphreys · 2002
4. Cement Technology Roadmap 2009 – Carbon emissions reductions up to 2050, IEA-WBCSD, Geneva, Switzerland, 2009.
5. Cement Industry Energy and CO2 Performance ‘‘Getting the Numbers Right, WBCSD-CSI, Washington, DC, 2009.
6. CIF Cement industry environment report, Cement Industry Federation, 2003.
7. Guidelines for green concrete structures, Fib Bulletin No. 67, Lausanne, Switzerland, 2012.
8. Industrially interesting approaches to low-CO2 cement10.1016/j.cemconres.2004.01.021 ↗
9. Developing an optimization model for CO2 reduction in cement production process10.25103/jestr.031.15 ↗
10. Yang · 2017 · 89
11. Mehta · 2006
12. Properties of natural pozzolan and its potential utilization in environmental friendly concrete10.1139/L10-112 ↗
13. D. Laurent, Z.A. Al-Nakhebi, Reconnaissance for pozzolan in the pyroclastic cores of the Harrats, Technical Record BRGM-79-JED-18, Saudi Arabian Deputy Ministry for Mineral Resources, Jeddah, Kingdom of Saudi Arabia, 1979.
14. D. Laurent, S. Chevrel, Prospecting for pozzolan on Harrat Lunayyir, Open File Report BRGM- JED-OR-80-13, Saudi Arabian Deputy Ministry for Mineral Resources, Jeddah, Kingdom of Saudi Arabia, 1980.
15. ] Z.A. Al-Nakhebi, B. Lemiere, J.P. Rancon, J. Fourniguet, K. Alwedi, N. Damanhori, M. Khogandi, S. Chevrel, R. Al-Dawawsi, D. Laurent, Potential industrial mineral resources of the Al Madinah region, Technical Report BRGM-TR-11-1, Saudi Arabian Deputy Ministry for Mineral Resources, Jeddah, Kingdom of Saudi Arabia,1990.
16. Assessment of the industrial utilization of scoria materials in central Harrat Rahat, Kingdom of Saudi Arabia10.1016/S0013-7952(00)00024-7 ↗
17. Evaluation of engineering properties of scoria in central Harrat Rahat, Kingdom of Saudi Arabia10.1007/s100640000061 ↗
18. Natural pozzolan as a partial substitute for cement in concrete10.2174/1874836801307010033 ↗
19. High-volume natural volcanic pozzolan and limestone powder as partial replacements for portland cement in self-compacting and sustainable concrete10.1016/j.cemconcomp.2013.09.003 ↗
20. Microstructure of cement paste with natural pozzolanic volcanic ash and Portland cement at different stages of curing10.1016/j.conbuildmat.2016.03.084 ↗
21. The Arabian continental alkali basalt province: Part 1. Evolution of Harrat Rahat, Kingdom of Saudi Arabia10.1130/0016-7606(1989)101<0071:TACABP>2.3.CO;2 ↗
22. Roobol · 2002
23. The Arabian continental alkali basalt province: Part III, Evolution of Harrat Kishb, Kingdom of Saudi Arabia: Bull10.1130/0016-7606(1992)104<0379:TACABP>2.3.CO;2 ↗
24. The Arabian continental alkali basalt province: Part II. Evolution of Harrats Khaybar, Ithnayn and Kura, Kingdom of Saudi Arabia10.1130/0016-7606(1991)103<0363:TACABP>2.3.CO;2 ↗
25. Z. Al-Nakhebi, D. Laurent. Prospecting for pozzolan in midwest Harrat Rahat, Open-File Report BRGM-OF-05-15, Saudi Arabian Deputy Ministry for Mineral Resources, Kingdom of Saudi Arabia, 1985.
26. A.A. Sabbahi, Geology and resources of basalt quarry site Kishb-12, southern Harrat Kishb, Open file report SGS-OF-2002-1, Saudi Geological Survey, Kingdom of Saudi Arabia, 2002.
27. H.H. Kurdi, Geology and resources of basalt quarry site Kishb-13, Southern Harrat Kishb, Open file report SGSOF-2002-4, Saudi Geological Survey, Kingdom of Saudi Arabia, 2002.
28. Abdul-Hafez, Kh Geology and resources of basalt quarry site Kishb-6 (Jabal al Labah), Southern Harrat Kishb, Open file report SGS-OF-2002-5, Saudi Geological Survey, Kingdom of Saudi Arabia, 2004.
29. T. Al-Sehly, A. Doban, K. Al-Wagdani, K. Abdul-Hafez, I. Al-Harthy, Evaluation of engineering properties and industrial utilization of scoria, Harrat Hutaymah, Open file report SGS-OF-2005-19, Saudi Geological Survey, Kingdom of Saudi Arabia, 2006.
30. Chemical, mineralogical, and morphological properties of steel slag10.1155/2011/463638 ↗
31. United Stated Geological Survey (USGS), Slag-iron and steel, Annual Review, Mineral Industry Surveys, U.S. Geological Survey, Minerals Yearbook, Reston, Va, USA, 2016.
32. Performance of concrete mixtures made with electric arc furnace (EAF) steel slag aggregate produced in the Arabian Gulf region10.1016/j.conbuildmat.2012.02.012 ↗
33. Electric arc furnace granulated slag for sustainable concrete10.1016/j.conbuildmat.2016.06.142 ↗
34. Electric arc furnace slag as natural aggregate replacement in concrete production10.1016/j.cemconcomp.2015.10.004 ↗
35. Performance evaluation of using electric arc furnace dust in asphalt binder10.1016/j.jclepro.2016.11.156 ↗
36. Cementitious and pozzolanic behavior of electric arc furnace steel slags10.1016/j.cemconres.2008.11.002 ↗
37. Hydration characteristics of Portland cement – Electric arc furnace slag blends10.1016/j.hbrcj.2013.05.006 ↗
38. Review of steel slag utilization in Saudi Arabia
39. Tennis · 2011
40. The role of calcium carbonate in cement hydration10.1016/j.cemconres.2006.10.013 ↗
41. Influence of limestone on the hydration of Portland cements10.1016/j.cemconres.2008.01.002 ↗
42. Portland-Limestone Cements. Their properties and hydration compared to those of other composite cements10.1016/j.cemconcomp.2004.02.006 ↗
43. Hawkins · 2003
44. Effects of portland cement replacement with limestone on the properties of hardened concrete10.1016/j.cemconcomp.2013.10.016 ↗
45. Malhotra · 2002
46. Thomas · 2010
47. ASTM C109/C109M-16a, Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens, ASTM International, West Conshohocken, PA, 2016.
48. ASTM C305-14, Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency, ASTM International, West Conshohocken, PA, 2014.
49. ASTM C618-15, Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete, ASTM International, West Conshohocken, PA, 2015.
50. ASTM C311/C311M-16, Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete, ASTM International, West Conshohocken, PA, 2016.
51. Mechanical activation of cement–slag mortars10.1016/j.conbuildmat.2011.05.001 ↗
52. Improved processing of blended slag cement through mechanical activation10.1023/B:JMSC.0000026948.85440.cc ↗
53. Optimum level of replacement slag in OPC–slag mortars
54. Concrete strength, cement hydration and the maturity rule