journal article·2018-01

Engineering and durability properties of eco-friendly mortar using cement-free SRF binder

Trong-Phuoc Huynh, Duy-Hai Vo, Chao-Lung Hwang

Publisher page

Abstract

Abstract The present study evaluates the engineering properties and durability of an eco-friendly mortar that was produced using an innovative cement-free SRF binder. Samples of the binder, which incorporated ground granulated blast furnace slag (GGBFS) (S), rice husk ash (RHA) (R), and circulating fluidized bed combustion fly ash (CFBC) (F), were prepared for the present study using four different RHA/GGBFS weight ratios (0/100, 15/85, 30/70, and 45/55) and three different amounts of CFBC (10%, 20%, and 30%) as an activator. The properties of the mortar samples were evaluated using compressive strength, water absorption and porosity, ultrasonic pulse velocity (UPV), electrical surface resistivity (ESR), and sulfate resistance. The effects of RHA and CFBC contents on the properties of the mortar samples were studied. Test results showed that both the RHA and CFBC affected the properties of the mortar samples significantly. At later curing ages, the mortar samples that incorporated 20% CFBC and 30% RHA exhibited the highest compressive strength values. Furthermore, all of the cement-free mortar samples exhibited good durability, as indicated by high UPV and ESR values and high resistance to sulfate attack.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production · Recycled Aggregate Concrete Performance

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Utilization of waste glass powder in the production of cement and concrete10.1016/j.conbuildmat.2016.08.016 ↗
2. Investigation into the use of unground rice husk ash to produce eco-friendly construction bricks10.1016/j.conbuildmat.2015.04.061 ↗
3. Influence of circulating fluidized bed combustion (CFBC) fly ash on properties of modified high volume low calcium fly ash (HVFA) cement paste10.1016/j.conbuildmat.2015.05.075 ↗
4. CFBC ash hydration studies10.1016/j.fuel.2004.10.017 ↗
5. Investigation on the hydration of CFBC fly ash10.1016/j.fuel.2012.02.008 ↗
6. Potential use of stockpiled circulating fluidized bed combustion ashes in controlled low strength material (CLSM) mixture10.1016/j.conbuildmat.2009.10.022 ↗
7. Potential use of stockpiled circulating fluidized bed combustion ashes in manufacturing compressed earth bricks10.1016/j.conbuildmat.2008.08.025 ↗
8. Use of circulating fluidized bed combustion fly ash and slag in autoclaved brick10.1016/j.conbuildmat.2012.03.006 ↗
9. Utilization of circulating fluidized bed fly ash in preparing non-autoclaved aerated concrete production10.1016/j.conbuildmat.2013.06.033 ↗
10. Utilization of fly ash blends from pulverized coal and fluidized bed combustions in geopolymeric materials10.1016/j.cemconcomp.2010.09.017 ↗
11. Utilization of blended fluidized bed combustion (FBC) ash and pulverized coal combustion (PCC) fly ash in geopolymer10.1016/j.wasman.2009.09.040 ↗
12. Electric arc furnace granulated slag for sustainable concrete10.1016/j.conbuildmat.2016.06.142 ↗
13. Engineering properties of cementless concrete produced from GGBFS and recycled desulfurization slag10.1016/j.conbuildmat.2014.04.017 ↗
14. Compressive strength, porosity and sorptivity of ultra fine slag based high strength concrete10.1016/j.conbuildmat.2016.05.090 ↗
15. Effect of rice husk ash on the strength and durability characteristics of concrete10.1016/j.conbuildmat.2011.04.009 ↗
16. Performance of rice husk ash produced using a new technology as a mineral admixture in concrete10.1016/S0008-8846(03)00038-3 ↗
17. Strength development of concrete with rice-husk ash10.1016/j.cemconcomp.2005.09.005 ↗
18. Utilizing residues of CFB co-combustion of coal, sludge and TDF as an alkali activator in eco-binder10.1016/j.conbuildmat.2015.01.062 ↗
19. Microstructure of cement pastes with residual rice husk ash of low amorphous silica content10.1016/j.conbuildmat.2014.12.059 ↗
20. Durability of cementing binders based on fly ash and other wastes10.1016/j.conbuildmat.2006.05.032 ↗
21. Activated fly ash/slag blended cement10.1016/j.resconrec.2007.04.002 ↗
22. Properties of mortars made by uncalcined FGD gypsum-fly ash-ground granulated blast furnace slag composite binder10.1016/j.wasman.2012.02.014 ↗
23. A review: the comparison between alkali-activated slag (Si + Ca) and metakaolin (Si + Al) cements10.1016/j.cemconres.2010.03.020 ↗
24. Engineering and sulfate resistance properties of slag-CFBC fly ash paste and mortar10.1016/j.conbuildmat.2014.04.009 ↗
25. Effect of alkali-activator and rice husk ash content on strength development of fly ash and residual rice husk ash-based geopolymers10.1016/j.conbuildmat.2015.10.025 ↗
26. Sustainable cement production–present and future10.1016/j.cemconres.2011.03.019 ↗
27. Strength of lime–fly ash compacts using different curing techniques and gypsum additive10.1617/s11527-011-9738-5 ↗
28. Mechanical properties of calcium silicate hydrates10.1617/s11527-010-9605-9 ↗
29. ASTM, Standard test method for compressive strength of hydraulic cement mortars using 2-in or 50-mm cube specimens, C109. Annual book of ASTM standards 04(01); 2016.
30. ASTM, Standard test method for rate of water absorption of masonry mortars, C1403. Annual book of ASTM standards 04(05); 2015.
31. Strength, porosity and corrosion resistance of ternary blend Portland cement, rice husk ash and fly ash mortar10.1016/j.conbuildmat.2007.06.010 ↗
32. ASTM, Standard test method for pulse velocity through concrete, C597. Annual book of ASTM standards 04(02); 2016.
33. AASTHO · 2015
34. Pozzolanic reaction in the presence of chemical activators Part II. Reaction products and mechanism10.1016/S0008-8846(00)00214-3 ↗
35. Hydration products and strength development of calcium hydroxide-based alkali-activated slag mortars10.1016/j.conbuildmat.2011.10.063 ↗
36. Circulating fluidized bed combustion ashes as an activator of ground vitrified blast furnace slag
37. Utilization of fly ash coming from a CFBC boiler co-firing coal and petroleum coke in Portland cement10.1016/j.fuel.2007.02.018 ↗
38. Compressive strength evaluation of structural lightweight concrete by non-destructive ultrasonic pulse velocity method10.1016/j.ultras.2012.12.012 ↗
39. V.M. Malhotra, Testing hardened concrete: nondestructure methods. Detroit, Michigan: American Concrete Institute Monograph No. 9; 1976.
40. Durability design and performance of self-consolidating lightweight concrete10.1016/j.conbuildmat.2005.01.003 ↗
41. Durability of self-consolidating lightweight aggregate concrete using dredged silt10.1016/j.conbuildmat.2008.11.006 ↗
42. Performance and properties of mortar mixed with nano-CuO and rice husk ash10.1016/j.cemconcomp.2016.10.006 ↗
43. Hardened properties of self-consolidating high performance concrete including rice husk ash10.1016/j.cemconcomp.2010.07.006 ↗
44. Activation of pozzolanic reaction of hydrated Portland cement fly ash pastes in sulfate solution10.1111/j.1151-2916.2002.tb00581.x ↗
45. Characterization of the degradation of self-compacting concretes in sodium sulfate environment: Influence of different mineral admixtures10.1016/j.conbuildmat.2013.05.086 ↗
46. Effect of rice husk ash on the thaumasite form of sulfate attack of cement-based materials10.1007/s13369-014-1414-y ↗
47. Strength and durability of mortar and concrete containing rice husk ash: a review