Compaction and freeze-thaw degradation assessment of recycled aggregates from unseparated construction and demolition waste
Source abstract
Abstract
Abstract Although previous studies attested to the feasibility of using recycled aggregates from unseparated construction and demolition waste (UCDW aggregates) in unbound layers of road pavements, the degradation caused by compaction and freezing action under simulative conditions has not been investigated yet. To investigate the effects of these two sources of degradation on resilient modulus (RM), three UCDW aggregates were collected from different plants in the Turin area and compared with a natural (NAT) aggregate. Partially-saturated specimens of UCDW aggregates at the optimal moisture content (wopt) and at wopt±2% were prepared at the gyratory shear compactor with 30 and 100 gyrations, and by subjecting specimens to 0, 4 and 8 two-day freeze–thaw cycles from −18 °C to +20 °C. Brittle and weak components of UCDW aggregates (crushed concrete, bricks) generate fine particles in the first part of the compaction process (in the first 30 gyrations). Freeze–thaw action led to a clear increase in the resilient modulus of UCDW specimens compacted at wopt and wopt+2%. A similar trend in RM was observed in the case of NAT aggregate in similar moisture conditions, while both UCDW and NAT exhibited a slight decrease for some samples prepared at wopt−2%. Under more severe but non–simulative testing conditions such as those currently used to select conventional granular materials, UCDW aggregate exhibits lower performances than NAT aggregate. Conversely, when evaluated in more simulative test conditions, the behaviour of UCDW aggregate is comparable to that of NAT one.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Recycled Aggregate Concrete Performance · Innovative concrete reinforcement materials · Asphalt Pavement Performance Evaluation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. European Joint Research Centre (JRC), Institute for Environment and Sustainability (IES), life cycle website: http://lct.jrc.ec.europa.eu.
2. J.R. Jiménez, Recycled aggregates (RAs) for roads, in: Handb. Recycl. Concr. Demolition Waste, Elsevier, 2013: pp. 351–377. doi:10.1533/9780857096906.3.351.10.1533/9780857096906.3.351 ↗
3. European Parliament, Directive 2008/98/EC of the European parliament and of the council of 19 November 2008 on waste and repealing certain directives (waste framework directive). 312(11-2b), European Commission, Brussels, Belgium, 2008.
4. European Commission, Construction and demolition waste - Environment - European Commission, (2011). http://ec.europa.eu/environment/waste/construction_demolition.htm.
5. ISPRA, Rapporto Rifiuti Speciali, Istituto Superiore per la protezione e la ricerca ambientale, Rome, Italy, 2016.
6. Use of recycled concrete aggregate in high-strength concrete10.1007/BF02480538 ↗
7. Performance of concrete made with commercially produced coarse recycled concrete aggregate10.1016/S0008-8846(00)00476-2 ↗
8. Laboratory investigation of mixing hot-mix asphalt with reclaimed asphalt pavement10.1177/0361198105192900105 ↗
9. A. Copeland, Reclaimed Asphalt Pavement in Asphalt Mixtures: State of the Practice, (2011).
10. The use of coarse and fine crushed bricks as aggregate in concrete10.1016/j.conbuildmat.2006.12.013 ↗
11. Geotechnical and geoenvironmental assessment of recycled construction and demolition waste for road embankments10.1016/j.proeng.2016.06.007 ↗
12. Use of recycled construction and demolition waste aggregate for road course surfacing10.1061/(ASCE)TE.1943-5436.0000320 ↗
13. Laboratory evaluation of recycled construction and demolition waste for pavements10.1016/j.conbuildmat.2010.11.105 ↗
14. Pre-normative research on the use of mixed recycled aggregates in unbound road sections10.1016/j.conbuildmat.2010.12.018 ↗
15. Utilisation of unbound recycled aggregates from selected CDW in unpaved rural roads10.1016/j.resconrec.2011.10.012 ↗
16. Use of mixed recycled aggregates with a low embodied energy from non-selected CDW in unpaved rural roads10.1016/j.conbuildmat.2012.02.042 ↗
17. Feasibility of using unbound mixed recycled aggregates from CDW over expansive clay subgrade in unpaved rural roads10.3390/ma9110931 ↗
18. M. Bassani, Studio finalizzato alla caratterizzazione prestazionale ed alla determinazione delle condizioni di omogeneità della portanza dei piani di sottofondo della costruenda circonvallazione di Venaria Reale e Borgaro Torinese (in Italian). Report for the Provincia di Torino, 2008.
19. American Association of State and Highway Transportation Officials (AASHTO), Specification for Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes. AASHTO M 145-91, 2012.
20. Consiglio Nazionale delle Ricerche (CNR), Determinazione della perdita in peso per abrasione di aggregati lapidei con l’apparecchio “Los Angeles”. CNR n.34/1992, 1992.
21. Consiglio Nazionale delle Ricerche (CNR), Determinazione della sensibilità al gelo di aggregati lapidei per sovrastrutture stradali. CNR n.80/1980, 1980.
22. European Committee for Standardization (CEN), Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption. EN 1097-6:2013, 2013.
23. European Committee for Standardization (CEN), Tests for geometrical properties of aggregates - Part 3: Determination of particle shape - Flakiness index. EN 933-3:2012, 2012.
24. European Committee for Standardization (CEN), Tests for geometrical properties of aggregates - Part 4: Determination of particle shape - Shape index. EN 933-4:2008, 2008.
25. State of the art. I: resilient response of unbound aggregates10.1061/(ASCE)0733-947X(2000)126:1(66) ↗
26. Santagata · 2016
27. European Committee for Standardization (CEN), Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation. EN 1097-2:2010, 2010.
28. Study on the influence of attached mortar content on the properties of recycled concrete aggregate10.1016/j.conbuildmat.2008.04.012 ↗
29. European Committee for Standardization (CEN), Tests for thermal and weathering properties of aggregates - Part 1: Determination of resistance to freezing and thawing. EN 1367-1:2007, 2007.
30. Use of recycled aggregates from construction and demolition waste in geotechnical applications: a literature review10.1016/j.wasman.2015.12.021 ↗
31. European Committee for Standardization (CEN), Unbound and hydraulically bound mixtures - Part 2: Test methods for laboratory reference density and water content - Proctor compaction. EN 13286-2:2010, 2010.
32. Centro Interuniversitario Sperimentale di Ricerca Stradale (CIRS), Norme Tecniche Prestazionali per Capitolati Speciali d’Appalto, 2001.
33. Performance-based re-use of tunnel muck as granular material for subgrade and sub-base formation in road construction10.1016/j.tust.2013.10.002 ↗
34. Laboratory testing of soil using superpave gyratory compactor
35. Comparative analysis of gyratory and proctor compaction processes of unbound granular materials10.1080/14680629.2011.9695251 ↗
36. American Association of State Highway and Transportation Officials (AASHTO), Standard method of test for determining the resilient modulus of soils and aggregate materials. AASHTO T 307-99, 2013.
37. Limiting properties in the characterisation of mixed recycled aggregates for use in the manufacture of concrete10.1016/j.conbuildmat.2011.04.027 ↗
38. Resilient modulus of recycled aggregates obtained by means of dynamic tests in a triaxial apparatus10.1016/j.sbspro.2012.09.898 ↗
39. Cement stabilization of reclaimed asphalt pavement aggregate for road bases and subbases10.1061/(ASCE)0899-1561(2002)14:3(239) ↗
40. M. Pasetto, N. Baldo, Moisture damage and low temperature cracking of bituminous mixtures made with recycled aggregates, in: 2015.10.1201/b18538-87 ↗
41. Influence of the pre-saturation of recycled coarse concrete aggregates on concrete properties10.1680/macr.2011.63.8.617 ↗
42. Durability performance of concrete with recycled aggregates from construction and demolition waste plants10.1016/j.conbuildmat.2014.12.103 ↗
43. J.B. Bazaz, M. Khayati, N. Akrami, Performance of concrete produced with crushed bricks as the coarse and fine aggregate, in: Geol. Soc. Lond., Citeseer, 2006.
44. Cement kiln dust and fly ash blends as an alternative binder for the stabilization of demolition aggregates10.1016/j.conbuildmat.2017.04.007 ↗
45. Suitability of recycled construction and demolition aggregates as alternative pipe backfilling materials10.1016/j.jclepro.2013.11.005 ↗
46. Statistical analysis of recycled aggregates derived from different sources for sub-base applications10.1016/j.conbuildmat.2011.07.035 ↗
47. Geotechnical and geoenvironmental properties of recycled construction and demolition materials in pavement subbase applications10.1061/(ASCE)MT.1943-5533.0000652 ↗
48. Permanent deformation behaviour of unbound recycled mixtures10.1016/j.conbuildmat.2012.07.062 ↗
49. Quality assessment of mixed and ceramic recycled aggregates from construction and demolition wastes in the concrete manufacture according to the spanish standard10.3390/ma7085843 ↗
50. A.R. Woodside, W. Woodward, D. Farmer, R.J. Collins, The assessment of the suitability of waste materials for use in highway construction, in: 1996.
51. Physical properties of demolition waste material10.1680/coma.2008.161.3.97 ↗
52. S. Omary, E. Ghorbel, G. Wardeh, Physical and Mechanical Properties of Recycled Demolition Gravels Submitted to Freeze/Thaw in Comparison to Natural Ones, in: CONCREEP 10, 2015: pp. 833–842.10.1061/9780784479346.099 ↗
53. Short-term and long-term effects of cement kiln dust stabilization of construction and demolition waste10.1061/(ASCE)MT.1943-5533.0001797 ↗
54. Huang · 2003
55. Aggregate morphology affecting resilient behavior of unbound granular materials10.1177/0361198106195200102 ↗
56. Self-cementing properties of crushed demolished concrete in unbound layers: results from triaxial tests and field tests10.1016/S0956-053X(00)00095-7 ↗
57. The cause and influence of self-cementing properties of fine recycled concrete aggregates on the properties of unbound sub-base10.1016/j.wasman.2005.12.013 ↗
58. O. Bozyurt, A.K. Keene, J.M. Tinjum, T.B. Edil, D. Fratta, Freeze-Thaw Effects on Stiffness of Unbound Recycled Road Base, in: H. Zubeck, Z. Yang (Eds.), Mech. Prop. Frozen Soil, ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, 2013: pp. 1–19. doi:10.1520/STP156820130014.10.1520/STP156820130014 ↗
59. Fredlund · 1993
60. Durability effects on resilient moduli of stabilized aggregate base10.3141/1687-04 ↗
61. Field and laboratory evaluation of cement kiln dust as a soil stabilizer10.3141/1714-04 ↗
62. Strength and stiffness of recycled materials stabilised with fly ash: a laboratory study10.1080/14680629.2013.779299 ↗
63. Climatic effect on resilient modulus of recycled unbound aggregates10.1080/14680629.2015.1060250 ↗