journal article·2018-02Open access

A comparative study on factors affecting time to cover cracking as a service life indicator

Fangjie Chen, Hassan Baji, Chun-Qing Li

Abstract

Abstract Corrosion of steel in reinforced concrete structures has been a major worldwide problem. The time to cover cracking plays a key role in assessment of serviceability of reinforced concrete structures subjected to corrosion. A large number of analytical, numerical, and empirical models have been developed to predict the time to time to cover cracking. In addition, extensive experiments have been conducted in order to verify the developed models. In this paper, an overview of the existing models is presented. A large experimental database of reported data on time to cover cracking is collated. Performance of four analytical models taken from the available literature is then examined using the established experimental database. Sensitivity analysis followed by a probabilistic study is carried out to identify the factors affecting time to cover cracking as a service life indicator by means of the selected models. The results from sensitivity analysis show that the porous zone and the properties of rust are the most influential factors for time to cover cracking. It is also shown that there is high uncertainty in predicting service life of reinforced concrete structures based on time to cover cracking.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete Corrosion and Durability · Infrastructure Maintenance and Monitoring · Geotechnical Engineering and Underground Structures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (68)

Show source-provided references
1. ACI 318 · 2014
2. Reinforcement corrosion in concrete structures, its monitoring and service life prediction––a review10.1016/S0958-9465(02)00086-0 ↗
3. Analysis of iron oxides accumulating at the interface between aggregates and cement paste10.1016/S0008-8846(00)00392-6 ↗
4. Effect of reinforcement corrosion on bond strength10.1016/0950-0618(95)00077-1 ↗
5. Factors controlling cracking of concrete affected by reinforcement corrosion10.1007/BF02480466 ↗
6. Cover cracking as a function of bar corrosion: Part I-Experimental test10.1007/BF02472805 ↗
7. Hazard-based optimum lifetime inspection and repair planning for deteriorating structures10.1061/(ASCE)ST.1943-541X.0000810 ↗
8. Physical model for steel corrosion in concrete sea structures-application10.1061/JSDEAG.0005169 ↗
9. Analytical model of corrosion-induced cracking of concrete considering the stiffness of reinforcement10.12989/sem.2003.16.6.749 ↗
10. Analytical model for time to cover cracking in RC structures due to rebar corrosion10.1016/j.nucengdes.2005.10.011 ↗
11. Broomfield · 2006
12. Broomfield · 2011
13. The use of permanent corrosion monitoring in new and existing reinforced concrete structures10.1016/S0958-9465(01)00024-5 ↗
14. Deterioration of concrete due to reinforcement steel corrosion10.1016/0958-9465(95)00043-7 ↗
15. Mechanical properties of the rust layer induced by impressed current method in reinforced mortar10.1016/j.cemconres.2008.03.016 ↗
16. Influence of steel–concrete interface quality on reinforcement corrosion induced by chlorides10.1680/macr.2003.55.2.151 ↗
17. Prediction of corrosion-induced cover cracking in reinforced concrete structures10.1016/j.conbuildmat.2010.11.074 ↗
18. Analytical modelling of concrete cover cracking caused by corrosion of reinforcement10.1617/s11527-009-9510-2 ↗
19. C.-F. M. Code, Comitè Euro-international du Bèton-Federation Internationale De La Precontrainte.“ Lousanne, 1990.
20. Cullen · 1999
21. An examination of response-surface methodologies for uncertainty analysis in assessment models10.1080/00401706.1985.10488032 ↗
22. Meso-scale numerical investigation on cracking of cover concrete induced by corrosion of reinforcing steel10.1016/j.engfailanal.2014.01.011 ↗
23. A study of steel rebars embedded in concrete during 65 years10.1016/j.corsci.2004.01.006 ↗
24. Effectiveness of impressed current technique to simulate corrosion of steel reinforcement in concrete10.1061/(ASCE)0899-1561(2003)15:1(41) ↗
25. A model for prediction of time from corrosion initiation to corrosion cracking10.1016/j.cemconcomp.2006.11.004 ↗
26. Reliability of reinforced concrete girders under corrosion attack10.1061/(ASCE)0733-9445(1997)123:3(286) ↗
27. The presentation of the chloride threshold level for corrosion of steel in concrete10.1016/S0010-938X(97)00009-7 ↗
28. F. Hoffman, R. Gardner. Evaluation of uncertainties in environmental radiological assessment models. Radiological Assessments: A Textbook on Environmental Dose Assessment, Washington, D.C. 1983.
29. Concrete stress distribution in ultimate strength design
30. Nano-indentation measurement of oxide layers formed in LBE on F/M steels10.1016/j.jnucmat.2008.02.073 ↗
31. JCSS · 2012
32. T. Krieger, C. Durston, D. Albright. Statistical determination of effective variables in sensitivity analysis, Transactions of the American Nuclear Society, vol. 28. 1978.
33. Initiation of chloride-induced reinforcement corrosion in concrete structural members—experimentation
34. Life-cycle modeling of corrosion-affected concrete structures: propagation10.1061/(ASCE)0733-9445(2003)129:6(753) ↗
35. Reliability based service life prediction of corrosion affected concrete structures10.1061/(ASCE)0733-9445(2004)130:10(1570) ↗
36. Numerical simulation of behavior of reinforced concrete structures considering corrosion effects on bonding10.1061/(ASCE)ST.1943-541X.0001021 ↗
37. Analytical model for corrosion-induced crack width in reinforced concrete structures
38. Liu · 1996
39. Modeling the time-to-corrosion cracking in chloride contaminated reinforced concrete structures
40. Reinforcement corrosion-induced cover cracking and its time prediction for reinforced concrete structures10.1016/j.corsci.2010.12.026 ↗
41. Bond characteristics of corrding reinforcement in concrete beams10.1007/BF02479434 ↗
42. Numerical modeling of steel corrosion in concrete structures due to chloride ion, oxygen and water movement10.3151/jact.1.147 ↗
43. Melchers · 1999
44. Cover cracking as a function of rebar corrosion: part 2—numerical model10.1007/BF02472864 ↗
45. S. Morinaga, Prediction of service lives of reinforced concrete buildings based on rate of corrosion of reinforcing steel, Special report of Institute of Technology, Shimizu Corporation, Japan, 1988.
46. Non-uniform time-to-corrosion initiation in steel reinforced concrete under chloride environment10.1016/j.corsci.2014.01.023 ↗
47. Mechanical properties of an iron oxide formed by corrosion in reinforced concrete structures10.1016/j.corsci.2006.03.007 ↗
48. Modeling cover-cracking due to reinforcement corrosion in RC structures
49. Corrosion cracking in relation to bar diameter, cover, and concrete quality10.1061/(ASCE)0899-1561(1992)4:4(327) ↗
50. Load carrying capacity of concrete structures with corroded reinforcement10.1016/S0950-0618(97)00043-3 ↗
51. Laboratory studies and calculations on the influence of crack width on chloride-induced corrosion of steel in concrete
52. A double-cylinder model incorporating confinement effects for the analysis of corrosion-caused cover cracking in reinforced concrete structures10.1016/j.corsci.2015.07.009 ↗
53. Corrosion and Protection Corrosion products of reinforcing bars embedded in concrete10.1016/0010-938X(93)90382-Q ↗
54. G. Tilly, The durability of repaired concrete structures, IABSE Symposium Report, International Association for Bridge and Structural Engineering pp. 1–8, 2007.10.2749/222137807796120030 ↗
55. Timoshenko · 1970
56. Tuutti · 1982 · 159
57. Experimental and numerical investigation of corrosion-induced cover cracking in reinforced concrete structures10.1061/(ASCE)0733-9445(2009)135:4(376) ↗
58. K. Vu, M. Stewart, Spatial variability of structural deterioration and service life prediction of reinforced concrete bridges, IABMAS, Barcelona, Spain, Barcelona, International Center for Numerical Methods in Engineering (CIMNE), 2002.
59. Predicting the likelihood and extent of reinforced concrete corrosion-induced cracking10.1061/(ASCE)0733-9445(2005)131:11(1681) ↗
60. Corrosion-induced cracking: experimental data and predictive models
61. Effect of corrosion and load on reinforcement bond strength10.2749/101686602777965559 ↗
62. On the penetration of corrosion products from reinforcing steel into concrete due to chloride-induced corrosion10.1016/j.corsci.2010.03.025 ↗
63. The corrosion pattern of reinforcement and its influence on serviceability of reinforced concrete members in chloride environment10.1016/j.cemconres.2009.07.025 ↗
64. A study of the elastic moduli of corrosion products using nano-indentation techniques10.1016/j.corsci.2012.08.016 ↗
65. Corrosion-induced concrete cracking model considering corrosion product-filled paste at the concrete/steel interface10.1016/j.conbuildmat.2016.04.097 ↗
66. Non-uniform distribution of rust layer around steel bar in concrete10.1016/j.corsci.2011.08.045 ↗
67. Modeling the amount of steel corrosion at the cracking of concrete cover10.1260/136943306778827556 ↗
68. Critical thickness of rust layer at inner and out surface cracking of concrete cover in reinforced concrete structures10.1016/j.corsci.2012.03.018 ↗