Utilization of coal fly ash from a Chinese power plant for manufacturing highly insulating foam glass: Implications of physical, mechanical properties and environmental features
Source abstract
Abstract
Abstract This research focuses on the potential use of fly ash (WAf) from a Chinese pulverized-coal combustion (PCC) power plant for manufacturing foam glass. The influences of fly ash properties, fly ash/recycled glass proportion in the raw materials, addition of fluxing and foaming agent, firing temperature, and residence time at the peak temperature on the final properties (apparent density, compressing strength and leachable potential of major and trace elements) of the foam specimens are investigated. The optimal foaming products were obtained consuming up to 33.3–43.3% fly ash, adding 9–11% Na2CO3 fluxing agent and 0.5% SiC foaming agent, firing at 865–915 °C during 15 min residence time at the peak temperature. The obtained fly ash-based product revealed comparable compressive strength but slightly higher densities than commercial foam glass, with low CO2 emissions and low leachable potential for environmentally relevant trace elements within the limits for inert/no-hazardous material established by the European Council Decision 2003/33/EC for land waste disposal. The large porosity of the foam glass indicates a high potential of thermal and acoustic insulation. The foaming behavior and the final properties the foam glass are strongly influenced by properties of fly ash (mainly fluxing temperature and organic C content), fly ash/recycled glass proportion in the raw materials, addition of Na2CO3 fluxing agent and SiC foaming agent, firing temperature, and residence time at the peak temperature. The low C content and high refractory character of WAf give rise to poor foaming of the specimens when only fly ash and Na2CO3 mixtures are used. The consumption of relatively high proportions of recycled glass and SiC is essential to produce foaming.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Coal and Its By-products · Recycling and utilization of industrial and municipal waste in materials production · Coal Properties and Utilization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. BP Statistical Review of World Energy June 2017. http://www.bp.com/content/dam/bp/en/corporate/pdf/energy-economics/statistical-review-2017/bp-statistical-review-of-world-energy-2017-full-report.pdf, 2017.
2. A review on the utilization of flyash10.1016/j.pecs.2009.11.003 ↗
3. Cox · 2008
4. A review on the applications of coal combustion products in China
5. A comprehensive review on the applications of coal fly ash10.1016/j.earscirev.2014.11.016 ↗
6. High quality of Jurassic Coals in the Southern and Eastern Junggar Coalfields, Xinjiang, NW China: geochemical and mineralogical characteristics10.1016/j.coal.2012.05.003 ↗
7. Environmental geochemistry of the feed coals and their combustion by-products from two coal-fired power plants in Xinjiang Province, Northwest China10.1016/j.fuel.2011.10.025 ↗
8. Synthesis of merlinoite from Chinese coal fly ashes and its potential utilization as slow release K-fertilizer10.1016/j.jhazmat.2013.11.063 ↗
9. Potential utilization of FGD gypsum and fly ash from a Chinese power plant for manufacturing fire-resistant panels10.1016/j.conbuildmat.2015.07.183 ↗
10. Preparation of foam glass from waste glass and fly ash10.1016/j.matlet.2014.07.028 ↗
11. Preparation and characterization of foams from sheet glass and fly ash using carbonates as foaming agents10.1016/j.ceramint.2007.10.019 ↗
12. Bulk nucleated fine grained mono-mineral glass-ceramics from low-silica fly ash10.1016/j.ceramint.2008.01.002 ↗
13. Preparation of glass ceramic foams for thermal insulation applications from coal fly ash and waste glass10.1016/j.conbuildmat.2016.02.183 ↗
14. Synthesis, characterization and modeling of new building insulation material using ceramic polishing waste residue10.1016/j.conbuildmat.2015.03.089 ↗
15. Foaming of flat glass cullet using Si3N4 and MnO2 powders10.1016/j.ceramint.2008.10.022 ↗
16. Production technology of glass foams
17. J. Hurley, S. Consultant, A UK market survey for foam glass, Research and Development Final Report, in The Waste and Resources Action Programme, 2003.
18. W. Lytle, Pittsburgh Plate Glass, USA, US Patent 2 (1940) 215-223.
19. Problems of glass foam production10.1023/B:GLAC.0000008234.79970.2c ↗
20. Thermal conductivity of lightweight aggregate based on coal fly ash10.1007/s10973-012-2339-x ↗
21. Use of soda-lime scrap-glass as a fluxing agent in a porcelain stoneware tile mix10.1016/S0955-2219(03)00121-3 ↗
22. Drying and decomposition of sodium carbonate10.1021/ac60137a031 ↗
23. EN 12457-4, Characterization of waste: Leaching. Compliance test for leaching of granular waste material and sludges, Part 2: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (Without or with size reduction), 2003.
24. Environmental impact of mineral transformations undergone during coal combustion10.1007/BF01704573 ↗
25. Glass ceramic foams from coal ash and waste glass: production and characterization10.1179/174367606X81632 ↗
26. Glass foams from dismantled cathode ray tubes10.1016/j.ceramint.2005.04.019 ↗
27. Cellular structures
28. European Council Decision 2003/33/EC, Council Decision of 19 December 2002 establishing criteria and procedures for the acceptance of waste at landfills pursuant to Article 16 of and Annex II to Directive 1999/31/EC: Official Journal of the European Communities, 16 (2003) 27-49.