journal article·2018-08

Effect of a new type of high-strength lightweight foamed concrete on seismic performance of cold-formed steel shear walls

Zhifeng Xu, Zhongfan Chen, Suhang Yang

Publisher page

Abstract

Abstract High-strength lightweight foamed concrete (HLFC), as a new type of load-bearing structural material, was developed using suitable mix proportion and physical method in this study. Material properties of HLFC with dry density of 500 kg/m3 and 700 kg/m3 were studied by a series of tests. To investigate the effect of HLFC on seismic behavior of cold-formed steel (CFS) shear walls, three shear wall specimens were fabricated and tested under in-plane cycle loading. The effects of HLFC on failure mode, load-bearing capacity, ductility, stiffness degradation and energy dissipation capacity of the walls were analyzed. Test results indicated that HLFC with density grade of A05 and A07 exhibit higher compressive strength and better thermal insulation than conventional foamed concrete. Furthermore, the compressive strength and thermal insulation of HLFC meets the requirements of both the load-bearing capacity and thermal insulation property of shear walls. Moreover, the use of HLFC in CFS shear wall changes failure mode of the walls from local failure to shear failure. Due to compressive strength of HLFC, restriction effect of HLFC on steel frame and bond-slip behavior between HLFC and studs, HLFC-filled CFS shear walls are superior to conventional CFS shear wall in terms of load-bearing capacity, ductility, stiffness and energy dissipation capacity. Finally, based on shear strength of the HLFC-filled CFS shear walls, the existing formula proposed by the standard CNS 383-16 is suitable for predicting the shear strength of HLFC-filled CFS shear walls, and the differences between the experimental and calculated results were within 10%.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Load-Bearing Analysis · Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (67)

Show source-provided references
1. Properties and applications of foamed concrete: a review10.1016/j.conbuildmat.2015.10.112 ↗
2. Structure and properties of aerated concrete: a review10.1016/S0958-9465(00)00016-0 ↗
3. Elevated-temperature thermal properties of lightweight foamed concrete10.1016/j.conbuildmat.2010.07.016 ↗
4. Structural behaviour of composite sandwich panels with plain and fibre-reinforced foamed concrete cores and corrugated steel faces10.1016/j.compstruct.2011.12.017 ↗
5. Effects of expanded polystyrene (EPS) particles on fire resistance, thermal conductivity and compressive strength of foamed concrete10.1016/j.conbuildmat.2016.02.218 ↗
6. China Industry Standard · 2011
7. Experimental and numerical investigation of influence of air-voids on the compressive behaviour of foamed concrete10.1016/j.matdes.2017.05.054 ↗
8. Experimental study on use of lightweight foam concrete as subgrade bed filler of ballastless track10.1016/j.conbuildmat.2017.04.122 ↗
9. Proportioning and characterization of Portland cement-based ultra-lightweight foam concretes10.1016/j.conbuildmat.2015.01.051 ↗
10. Mechanical characterization of lightweight foamed concrete
11. A classification of studies on properties of foam concrete10.1016/j.cemconcomp.2009.04.006 ↗
12. Properties and applications of foamed concrete; a review10.1016/j.conbuildmat.2015.10.112 ↗
13. Experimental investigation on the compressive strength of foamed concrete: effect of curing conditions, cement type, foaming agent and dry density10.1016/j.conbuildmat.2017.12.241 ↗
14. Models relating mixture composition to the density and strength of foam concrete using response surface methodology10.1016/j.cemconcomp.2006.06.001 ↗
15. Influence of filler type on the properties of foam concrete10.1016/j.cemconcomp.2005.12.001 ↗
16. High-volume, ultra-low-density fly ash foamed concrete10.1680/jmacr.17.00063 ↗
17. Preliminary views on the potential of foamed concrete as a structural material10.1680/macr.2005.57.1.21 ↗
18. The effect of high fly ash content on the compressive strength of foamed concrete10.1016/S0008-8846(00)00430-0 ↗
19. Manufacturing of sintered lightweight aggregate using high-carbon fly ash and its effect on the mechanical properties and microstructure of concrete10.1016/j.jclepro.2015.07.001 ↗
20. Microstructure and mixture proportioning of non-structural foamed concrete with silica fume10.1680/jmacr.17.00066 ↗
21. Experimental research on properties of high-strength foamed concrete10.1061/(ASCE)MT.1943-5533.0000353 ↗
22. Experimental research on properties of high-strength foamed concrete10.1061/(ASCE)MT.1943-5533.0000353 ↗
23. Structural performance of lightweight steel-foamed concrete–steel composite walling system under compression10.1016/j.tws.2010.08.007 ↗
24. Effect of confinement on steel-concrete composite light-weight load-bearing wall panels under compression10.1016/j.jcsr.2012.10.008 ↗
25. Behaviour of steel-foam concrete composite panel under in-plane lateral load10.1016/j.jcsr.2017.10.002 ↗
26. Experimental investigations on ultra-lightweight-concrete encased cold-formed steel structures Part II: stability behavior of elements subjected to compression10.1016/j.tws.2016.01.003 ↗
27. Chinese Industry Standard · 2012
28. Chinese Industry Standard · 2016
29. Chinese Industry Standard · 2001
30. ACI Committee 318 · 2014
31. European Committee for Standardization · 2004
32. China Industry Standard · 2014
33. China Industry Standard · 2007
34. Chinese Industry Standard · 2011
35. Chinese Industry Standard · 2007
36. Chinese Industry Standard · 2013
37. Chinese Industry Standard · 2013
38. A classification of studies on properties of foam concrete10.1016/j.cemconcomp.2009.04.006 ↗
39. China Industry Standard · 2008
40. Microstructure and mixture proportioning of non-structural foamed concrete with silica fume10.1680/jmacr.17.00066 ↗
41. Relative compression strength evolution of silica-fume ultrahigh-performance concrete under saturated adiabatic hydration using virtual tests10.1061/(ASCE)MT.1943-5533.0002117 ↗
42. Microstructure of high-strength foam concrete10.1016/j.matchar.2008.12.011 ↗
43. Prediction of concrete tensile strength from its compressive strength: an evaluation of existing relations for normal weight concrete
44. C.E.B.F.I.P. MC90 · 1993
45. C.F.M. Code · 1990
46. Guo · 2003 · 33
47. Experimental research on properties of foamed concrete reinforced with polypropylene fibers
48. A new method for determining the pure shearing strength of concrete
49. Strength of concrete under combined stresses
50. The variation in elastic modulus throughout the compression of foam materials10.1016/j.actamat.2016.03.003 ↗
51. Chinese Industry Standard · 2010
52. Chinese National Standard · 2016
53. China Industry Standard · 2011
54. Chinese National Standard · 2002
55. Application of redispersion emulsoid powder in foamed concrete
56. Chinese National Standard · 2010
57. China Industry Standard · 2013
58. China Industry Standard · 2016
59. American Society for Testing and Materials · 2011
60. China Industry Standard · 2015
61. American Iron and Steel Institute · 2007
62. Performance of cold-formed-steel-framed shear walls sprayed with lightweight mortar under reversed cyclic loading10.1016/j.tws.2015.09.024 ↗
63. Experimental research on the failure mechanism of foam concrete with C-Channel embedment10.12989/cac.2014.14.3.263 ↗
64. CSA · 2012
65. American Iron and Steel Institute · 2009
66. China Industry Standard · 2002
67. China Industry Standard · 2010