journal article·2018-11Open access

The influence of different concrete additions on the properties of lightweight concrete evaluated using experimental and numerical approaches

Sang-Yeop Chung, Mohamed Abd Elrahman, Dietmar Stephan, Paul H. Kamm

Abstract

Abstract Lightweight concrete is a building material used for better insulation and lower energy consumption. The material properties of lightweight concrete, such as compressive strength and thermal conductivity, are strongly affected by the characteristics of its aggregate, binder, and other concrete additions. This study aims to investigate the effects of different concrete additions on the performance of lightweight concrete. Six different materials were used as concrete additions: limestone powder, expanded clay (Liapor®), fine fly ash, fly ash, and fine and normal sand. For lightweight concrete specimens, expanded glass granulate, i.e., Liaver®, was used as a lightweight aggregate to clarify the effects of concrete addition type, with all specimens designed so as to have a density between 800 and 950 kg/m3. The effects of different concrete additions on the characteristics and properties of lightweight concrete were investigated using several approaches; X-ray micro-computed tomography ( μ -CT) was adopted to examine microstructural characteristics, with both the mechanical and thermal properties of the materials being measured using experimental tools. Numerical analysis was also conducted to validate the performance of the materials. The results show that supplementary materials can improve the performance of lightweight concrete with regard to both compressive strength and thermal conductivity.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Concrete Properties and Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Neville · 2012
2. Mindess · 2002
3. Structure and properties of aerated concrete: a review10.1016/S0958-9465(00)00016-0 ↗
4. Oil-palm by-products as lightweight aggregate in concrete mixture: a review10.1016/j.jclepro.2016.03.100 ↗
5. Ultra-lightweight concrete: energy and comfort performance evaluation in relation to buildings with low and high thermal mass10.1016/j.enbuild.2016.12.049 ↗
6. Evaluation of the effects of crushed and expanded waste glass aggregates on the material properties of lightweight concrete using image-based approaches10.3390/ma10121354 ↗
7. Lightweight masonry mortars made with expanded clay and recycled aggregates10.1016/j.conbuildmat.2016.05.065 ↗
8. Effect of different gradings of lightweight aggregates on the properties of concrete10.3390/app7060585 ↗
9. The manufacture of lightweight aggregates from recycled masonry rubble10.1016/j.conbuildmat.2015.07.027 ↗
10. Characterization of mechanical and bactericidal properties of cement mortars containing waste glass aggregate and nanomaterials10.3390/ma9080701 ↗
11. Self compacting concrete: theoretical and experimental study10.1016/j.cemconres.2005.06.002 ↗
12. The effects of aggregate properties on lightweight concrete10.1016/j.buildenv.2005.06.031 ↗
13. Development of ultra-lightweight fibre reinforced concrete applying expanded waste glass10.1016/j.jclepro.2015.07.082 ↗
14. Basic properties of structural LWAC based on waste and recycled materials10.1061/(ASCE)MT.1943-5533.0001696 ↗
15. Mehta · 2015
16. A review of waste produces utilized as supplements to portland cement in concrete10.1016/j.jclepro.2016.02.013 ↗
17. Influence of the initial moist curing time on the sulfate attack resistance of concretes with different binders10.1016/j.conbuildmat.2017.03.235 ↗
18. Influence of binder characteristics on the setting and hardening of hemp lightweight concrete10.1016/j.conbuildmat.2016.02.138 ↗
19. Oxygen permeability of structural lightweight aggregate concrete10.1016/j.conbuildmat.2017.01.075 ↗
20. Chloride migration in structural lightweight aggregate concrete produced with different binders10.1016/j.conbuildmat.2015.08.080 ↗
21. The influence of aggregate size and binder material on the properties of pervious concrete
22. Engineering properties of lightweight aggregate concrete containing limestone powder and high volume fly ash10.1016/j.jclepro.2016.06.082 ↗
23. Overview of supplementary cementitious materials usage in lightweight aggregate concrete10.1016/j.conbuildmat.2017.02.081 ↗
24. Engineering properties of lightweight aggregate concrete containing binary and ternary blended cement10.1016/j.jclepro.2017.02.077 ↗
25. ECS, Concrete – Part 1: Specification, Performance, Production and Conformity, EN 206-1:2000, Brussels, Belgium, 2000.
26. EN 12390-4:2000, Testing Hardened Concrete–Part 4: Compressive Strength; Specification for Testing Machines, Jul. 2000.
27. ISO 22007-2:2015, Plastics–Determination of Thermal Conductivity and Thermal Diffusivity–Part 2: Transient Plane Heat Source (Hot Disk) Method, Aug. 2015.
28. EuroLightCon, LWAC material properties state-of-the-art, in: Economic Design and Construction with Light Weight Aggregate Concrete, Brite-EuRam III, 1998.
29. ECS, Tests for Mechanical and Physical Properties of Aggregates. Determination of Particle Density and Water Absorption, EN 1097-6:2013, Brussels, Belgium, 2013.
30. Über die Beziehungen zwischen Kornabstufungen und Zwischenraum in Produkten aus losen Körnern (in German)10.1007/BF01422986 ↗
31. Particle-size distribution and packing fraction of geometric random packings10.1103/PhysRevE.74.031309 ↗
32. Optimal multi-level thresholding using a two-stage Otsu optimization approach10.1016/j.patrec.2008.10.003 ↗
33. Pore characteristics and their effects on the material properties of foamed concrete evaluated using micro-ct images and numerical approaches10.3390/app7060550 ↗
34. Application of genetic algorithm for modeling of dense packing of concrete aggergates10.1016/j.conbuildmat.2010.01.010 ↗
35. ABAQUS, Version 6.13, Dassault Systemes, Pawtucket, Rhode Island, 2013.
36. Simplified micro modeling of partially grouted masonry assemblages10.1016/j.conbuildmat.2015.03.021 ↗
37. M.R. Jones, Foamed concrete for structural use, in: Proceeding of One Day Seminar on Foamed Concrete: Properties, Applications and Latest Technological Developments, Loughborough University, 2001.
38. Modelling of reinforced concrete structures and composite structures with concrete strength degradation taken into consideration10.1016/S1644-9665(12)60105-8 ↗
39. In situ tomographic investigation on the early hydration behaviors of cementing systems10.1016/j.conbuildmat.2011.10.016 ↗
40. Measurement of air void system in lightweight concrete by X-ray computed tomography10.1016/j.conbuildmat.2017.06.180 ↗
41. A. Hueckler, Trag- und Verformungsverhalten von biegebeanspruchten Bauteilen aus Infraleichtbeton (ILC) (German), Sierke Verlag, Germany, 2016.