Assessment of compressive strength of historic masonry using non-destructive and destructive techniques
Source abstract
Abstract
Masonry structures were built by various techniques using different materials, the properties of which exhibit a considerable scatter dependent on periods of construction and region-specific conditions. For historic structures with a heritage value, various non- or minor-destructive tests (NDTs) are commonly applied, while the application of destructive tests (DTs) is minimized. The contribution is based on investigations of 15 historic stone and clay brick masonry structures, for which NDT strengths of masonry units are verified by DTs. The proposed operational approach makes it possible to account for statistical uncertainty due to a limited number of DTs used to calibrate NDTs. © 2018 Elsevier Ltd
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Masonry and Concrete Structural Analysis · Structural Health Monitoring Techniques · Geophysical Methods and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (83)
Show source-provided references
1. Recommendations for restoration of ancient buildings and the survival of a masonry chimney10.1016/j.conbuildmat.2005.08.026 ↗
2. EN 1996-1-1 · 2012
3. JCSS · 2018
4. CIB · 2010
5. W. Rücker, R. Rohrmann, SAMCO Final Report, F08b Guideline for Structural Health Monitoring, 2006, p. 63.
6. ICOMOS · 2003
7. Milan Holický, Peter Tanner, Raphaël Steenbergen, Camillo Nuti, Jon Shave and Jürgen Schnell. Assessment of Existing Structures (final draft of the technical specification, Apr 2018), 2018, p. 40.
8. ISO 13822 · 2010
9. ENIQ European Network for Inspection and Qualification. European Methodology for Qualification of Non-Destructive Testing, vol. 31, 2007, p. 40.
10. Strategies for the assessment of historic masonry structures
11. Investigation strategies for the diagnosis of historic structures: on-site tests on Avio Castle, Italy, and Pišece Castle, Slovenia10.1139/L07-143 ↗
12. Reinforced concrete structure: Non destructive in situ strength assessment of concrete10.1016/j.conbuildmat.2014.11.023 ↗
13. Evaluation of simple methods for assessing the uniaxial compressive strength of rock10.1016/S1365-1609(01)00039-9 ↗
14. Combining non-invasive techniques for reliable prediction of soft stone strength in historic masonries10.1016/j.conbuildmat.2017.04.146 ↗
15. Nondestructive evaluation of concrete strength: An historical review and a new perspective by combining NDT methods10.1016/j.conbuildmat.2011.12.103 ↗
16. ISO 18265 · 2013
17. Non destructive assessment of in situ concrete strength: comparison of approaches through an international benchmark10.1617/s11527-017-1009-7 ↗
18. Damage monitoring of an historical masonry building by the acoustic emission technique10.1617/s11527-005-9043-2 ↗
19. Crack monitoring in historical masonry with distributed strain and acoustic emission sensing techniques10.1016/j.conbuildmat.2018.01.103 ↗
20. Assessing the reliability of non-destructive and moderately invasive techniques for the evaluation of uniaxial compressive strength of stone masonry units10.1016/j.conbuildmat.2016.07.130 ↗
21. Strength assessment of historic brick masonry10.3846/13923730.2014.914087 ↗
22. Václav Kučera, Metodika pro zjišťování pevnosti zdicích prvků a malty ve stávající konstrukci (Methodology for estimating strength of masonry units and of mortar in existing structures, in Czech), 2002, p. 8.
23. Bohumil Horký, Jiří Dohnálek. Posuzování kvality malty v cihelném zdivu (On assessment of quality of mortar in brick masonry, in Czech), 1983, p. 46.
24. A non-destructive technique for the determination of mortar load capacity in situ10.1007/BF02473262 ↗
25. Static penetration test for historical masonry mortar10.1016/j.conbuildmat.2016.07.097 ↗
26. In situ mechanical characterization of the mortar in masonry buildings with DRMS
27. Torque Penetrometric Test for the in-situ characterisation of historical mortars: fracture mechanics interpretation and experimental validation10.1016/j.conbuildmat.2017.09.120 ↗
28. Characterisation of mechanical properties of historic mortars – testing of irregular samples
29. Physical and mechanical characterisation of historic mortars. Application to the evaluation of the state of conservation10.3989/mc.2009.41907 ↗
30. Probability and structural reliability assessment of mortar joint thickness in load-bearing masonry walls10.1016/j.strusafe.2014.02.005 ↗
31. Assessing concrete strength with rebound hammer: review of key issues and ideas for more reliable conclusions10.1617/s11527-013-0139-9 ↗
32. Assessment of model uncertainties for structural resistance10.1016/j.probengmech.2015.09.008 ↗
33. Non-destructive strength evaluation of concrete: analysis of some key factors using synthetic simulations10.1016/j.conbuildmat.2015.09.023 ↗
34. Procedures for detecting outlying observations in samples10.1080/00401706.1969.10490657 ↗
35. Computations on historic masonry structures10.1002/pse.120 ↗
36. DIN 1053. · 2007
37. Evaluation of the quality of historic brickwork10.1002/dama.201620711 ↗
38. Investigation into the failure mechanism of brick masonry loaded in axial compression
39. Zur Tragfähigkeit von Mauerwerk aus Sandstein (in German; On the Capacity of Masonry from Sandstone)
40. Tragverhalten von Natursteinmauerwerk aus Elbesandstein (in German; Structural Behavior of Natural Stone Masonry from Elbe Sandstone)
41. Masonry Strength
42. Assessment of the loadbearing capacity of historic masonry
43. Allowing for uncertainties in the modelling of masonry compressive strength10.1016/S0950-0618(02)00108-3 ↗
44. ČSN 73 0038 · 2014
45. Prediction of masonry compressive behaviour using a damage mechanics inspired modelling method10.1016/j.conbuildmat.2016.01.048 ↗
46. Structural reliability of masonry walls in flexure
47. Evaluation of compressive strength of historic masonry using measurements10.4028/www.scientific.net/AMR.923.213 ↗
48. Compressive strength of deteriorated historic masonry based on measurements
49. Probabilistic model for compressive strength of historic masonry
50. Ultrasonic pulse velocity for the evaluation of physical and mechanical properties of a highly porous building limestone10.1016/j.ultras.2015.02.010 ↗
51. Assessment of the Masonry Strength of the Fortress in Terezin10.2495/DSHF140131 ↗
52. Numerical modeling of the in-plane behavior of historical brick masonry walls10.1007/s00707-011-0493-z ↗
53. Lourenço · 2013
54. Probabilistic analysis of unreinforced brick masonry walls subjected to horizontal bending
55. Influence of material spatial variability on required safety factors for masonry walls in compression10.1002/dama.201700004 ↗
56. Probabilistic assessment of masonry compressive strength
57. Brehm · 2011
58. Ang · 2007
59. Holicky · 2013
60. Evaluation of concrete strength by means of ultrasonic waves: A method for the selection of coring position10.1016/j.conbuildmat.2014.03.017 ↗
61. An experimental study on the within-member variability of in situ concrete strength in RC building structures10.1016/j.conbuildmat.2013.05.102 ↗
62. Using Monte-Carlo simulations to evaluate the efficiency of different strategies for nondestructive assessment of concrete strength10.1617/s11527-016-0962-x ↗
63. Assessment of masonry strength in a heritage building
64. Structural assessment of heritage buildings
65. Assessment of compressive strength of historic mixed masonry10.3846/13923730.2014.914088 ↗
66. EN 1990 · 2002
67. Factors affecting the reliability of assessing the concrete strength by rebound hammer and cores10.1016/j.conbuildmat.2017.02.129 ↗
68. Reliability-based assessment of existing masonry arch railway bridges10.1016/j.conbuildmat.2016.04.030 ↗
69. Probabilistic-based assessment of a masonry arch bridge considering inferential procedures10.1016/j.engstruct.2016.11.067 ↗
70. Uncertainties in resistance models for sound and corrosion-damaged RC structures according to EN 1992-1-110.1617/s11527-014-0409-1 ↗
71. JCGM. GUM: Guide to the expression of uncertainty in measurement (accessed on 5 December 2017 at www.bipm.org): Joint Committee for Guides in Metrology, 2012.
72. Spatial variability and stochastic strength prediction of unreinforced masonry walls in vertical bending10.1016/j.engstruct.2013.11.031 ↗
73. Value of information: a roadmap to quantifying the benefit of structural health monitoring
74. On the value of monitoring information for the structural integrity and risk management10.1111/mice.12332 ↗
75. Economic and human safety reliability levels for existing structures10.1002/suco.201500022 ↗
76. Target reliability for existing structures considering economic and societal aspects10.1080/15732479.2016.1198394 ↗
77. On the detection of many outliers10.2307/1268354 ↗
78. Cook · 2011
79. Assessing concrete strength variability in existing structures based on the results of NDTs10.1016/j.conbuildmat.2018.04.055 ↗
80. Physical and mechanical characteristics of building materials of historic buildings
81. The effect of degradation processes on the serviceability of building materials of historic buildings
82. Compressive strength of historic masonry based on destructive and non-destructive test results
83. Assessment of compressive strength of historic masonry using in-situ measurements