Chloride binding behaviors of metakaolin-lime hydrated blends: Influence of gypsum and atmospheric carbonation
Source abstract
Abstract
Abstract Metakaolin-lime (1:1 by mass) blends are prepared to simulate the hydration products of metakaolin in cement and to clarify the effects of gypsum and carbonation on their chloride binding behaviors. The bound chloride content, hydration products and mechanisms were investigated by titration, X-ray diffraction, thermogravimetry and thermodynamic analysis. The results show that formation of stratlingite (C2ASH8, St) and carboaluminate are favored in gypsum-free blend, while monosulfoaluminate and ettringite are preferred in the gypsum-containing blends. During chloride exposure, St demonstrates good stability. Kuzel’s salt ( C 4 A s 0.5 C l H 12 , Ks) is kinetically favored at 3 h in gypsum-containing blends and it converts to Friedel’s salt ( C 4 A C l 2 H 10 , Fs) with continuous exposure. Chlorides can replace the sulfates in monosulfoaluminate ( C 4 A s H 12 , Ms) and Ks to eventually form Fs and release sulfates that can further react with Ms to form delay-ettringite. The thermodynamic calculation and experiments demonstrate consistent results related to the phase conversion. Addition of 4 wt% and 8 wt% gypsum reduce the bound chloride content up to 11%. During carbonation, chlorides bound by Friedel’s salt and C-S-H gels can reverse to free chlorides due to the decrease of pH and reduced calcium ion concentration in exposure solution. In a deeply carbonated system, ettringite does not exist.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Microbial Applications in Construction Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Chloride threshold for rebar corrosion in concrete with addition of silica fume10.1016/j.corsci.2007.07.007 ↗
2. Development of chloride binding capacity in cement pastes and influence of the pH of hydration products
3. Chloride binding and diffusion in slag blends: influence of slag composition and temperature10.1016/j.conbuildmat.2017.05.184 ↗
4. Numerical modeling for predicting service life of reinforced concrete structures exposed to chloride environments10.1016/j.cemconcomp.2010.07.012 ↗
5. Understanding the chloride binding and diffusion behaviors of marine concrete based on Portland limestone cement-alumina enriched pozzolans10.1016/j.conbuildmat.2018.11.270 ↗
6. Modeling of ionic interactions at the C-S-H surface. Application to CsCl and LiCl solutions in comparison with NaCl solutions
7. Chloride binding related to hydration products Part I: Ordinary Portland Cement10.1016/j.cemconres.2011.09.016 ↗
8. Corrosion of reinforcement steel embedded in high water-cement ratio concrete contaminated with chloride10.1016/S0958-9465(98)00018-3 ↗
9. Effect of tricalcium aluminate content of cement on corrosion of reinforcing steel in concrete10.1016/0008-8846(90)90006-J ↗
10. The influence of C3A content in cement on the chloride transport
11. Chloride binding of cement-based materials subjected to external chloride environment-a review10.1016/j.conbuildmat.2008.02.004 ↗
12. Role of calcium on chloride binding in hydrated Portland cement-metakaolin-limestone blends10.1016/j.cemconres.2017.02.003 ↗
13. Experimental investigation on chloride diffusion and binding in concrete containing metakaolin10.1179/1743278213Y.0000000134 ↗
14. The effect of supplementary cementitious materials on chloride binding in hardened cement paste10.1016/j.cemconres.2011.01.001 ↗
15. Chloride binding in sound and carbonated cementitious materials with various types of binder10.1016/j.conbuildmat.2014.05.049 ↗
16. Chloride ingress and binding of coral waste filler-coral waste sand marine mortar incorporating metakaolin10.1016/j.conbuildmat.2018.09.189 ↗
17. Chloride binding in hydrated MK, SF and natural zeolite-lime mixtures10.1016/j.conbuildmat.2017.08.034 ↗
18. Influence of the C/S and C/A ratios of hydration products on the chloride ion binding capacity of lime-SF and lime-MK mixtures10.1016/j.cemconres.2007.08.024 ↗
19. Hydration products of lime-metakaolin pastes at ambient temperature with ageing10.1016/j.tca.2012.02.013 ↗
20. Hydration, reaction and hardening of calcined clays and related minerals. I. Preliminary investigation on metakaolinite10.1016/0008-8846(83)90052-2 ↗
21. Mechanism of hydration of the metakaolin-lime-water system10.1016/S0008-8846(00)00456-7 ↗
22. Study of hydration products in the model systems metakaolin-lime and metakaolin-lime-gypsum
23. Microstructure, hydration and nanomechanical properties of concrete containing metakaolin10.1016/j.conbuildmat.2015.07.101 ↗
24. Strength properties and durability aspects of high strength concrete using Korean metakaolin10.1016/j.conbuildmat.2006.05.007 ↗
25. Carbonation and pH in mortars manufactured with supplementary cementitious materials10.1061/(ASCE)0899-1561(2009)21:5(217) ↗
26. T. Olivier, Prediction of chloride penetration into saturated concrete-multi-species approach (PhD thesis), Department of Building Materials, Chalmers University of Technology, Goteborg, Sweden, 2000.
27. Chloride binding capactiy and binding isotherms of OPC pastes and mortars10.1016/0008-8846(93)90089-R ↗
28. Friedel's salt profiles from thermogravimetric analysis and thermodynamic modelling of Portland cement-based mortars exposed to sodium chloride solution10.1016/j.cemconcomp.2017.01.002 ↗
29. Thermodynamic properties and thermal behavior of Friedel's salt10.1016/j.tca.2013.07.030 ↗
30. The influence of aluminum from metakaolin on chemical binding of chloride ions in hydrated cement pastes10.1016/j.clay.2018.03.038 ↗
31. Formation of stratlingite, 2CaO SiO2 Al2O3 8H2O, in relation to the hydration of high alumina cement10.1016/0008-8846(78)90005-4 ↗
32. Sratlingite formation in high alumina cement-silica fume systems: significance of sodium ions10.1016/0008-8846(95)00124-U ↗
33. Improving the structural consistency of C-S-H solid solution thermodynamic models10.1016/j.cemconres.2011.01.012 ↗
34. Limestone reaction in calcium aluminate cement–calcium sulfate systems10.1016/j.cemconres.2015.05.019 ↗
35. Influence of limestone and anhydrite on the hydration of Portland cements10.1016/j.cemconcomp.2013.11.007 ↗
36. Thermodynamic properties of Portland cement hydrates in the system CaO-Al2O3-SiO2-CaSO4-CaCO3-H2O10.1016/j.cemconres.2007.06.002 ↗
37. The AFm phase in Portland cement10.1016/j.cemconres.2006.10.010 ↗
38. Study of chloride binding and diffusion in GGBS concrete10.1016/S0008-8846(02)00712-3 ↗
39. Impact of the associated cation on chloride binding of Portland cement paste10.1016/j.cemconres.2014.01.027 ↗
40. Properties of coral waste-based mortar incorporating metakaolin: part II. Chloride migration and binding behaviors10.1016/j.conbuildmat.2018.04.076 ↗
41. The impact of sulphate and magnesium on chloride binding in Portland cement paste10.1016/j.cemconres.2014.07.007 ↗
42. Zibara · 2001
43. Impact of chloride on the mineralogy of hydrated Portland cement systems10.1016/j.cemconres.2010.03.002 ↗
44. Pessimum effect of externally applied chlorides on expansion due to delayed ettringite formation: proposed mechanism10.1016/j.cemconres.2005.11.020 ↗
45. Mechanism of Friedel's salt formation in cements rich in tri-calcium aluminate10.1016/S0008-8846(96)85009-5 ↗
46. Pore solution composition and chloride binding capacity of silica-fume cement pastes
47. Stability of Friedel's salt in carbonated concrete structural elements10.1016/S0008-8846(96)85010-1 ↗
48. Chemical equilibrium modeling and experimental measurement of solubility for Friedel’s salt in the Na-OH-Cl-NO3-H2O systems up to 200 °C10.1021/ie101028c ↗
49. C-S-H/solution interface: experimental and Monte Carlo studies10.1016/j.cemconres.2010.10.002 ↗
50. Anion uptake by calcium silicate hydrate
51. Carbonation of concrete made with dredged marine sand and its effect on chloride binding10.1016/j.conbuildmat.2016.05.011 ↗
52. Sulphate attack on concrete: limits of the AFt stability domain10.1016/0008-8846(92)90060-9 ↗
53. Stability of calcium sulphoaluminate hydrates in water solutions with various pH values10.1016/0008-8846(91)90062-M ↗
54. Ettringite solubility and geochemistry of the Ca(OH)2-Al2(SO4), 3–H2O system at 1 atm pressure and 298 K10.1016/S0009-2541(97)00128-9 ↗