Microrheology of fresh geopolymer pastes with different NaOH amounts at room temperature
Source abstract
Abstract
Abstract Microrheology is employed to continuously measure the viscoelasticity of fresh geopolymer pastes with disturbances under different NaOH amounts at an early age. In this study, the elastic index (EI), macroscopic viscosity index (MVI), storage modulus G′, and loss modulus G″ were computed to quantitatively analyse the viscoelastic properties of fresh geopolymer pastes based on the mean square displacement (MSD) of the particles. The results indicate that EI, MVI, and G′ of fresh geopolymer pastes dramatically increase over time initially, and then reach equilibrium. When the amount of NaOH is below 10%, an increase in the NaOH amount significantly improves the growth rate of the elastic properties, which is attributed to the formation of Si–O–Na bonds resulting in changes in the aluminosilicate gel. Beyond 10% NaOH, the surfaces of particles covered by a new layer of darker film delays the geopolymerization and development of the elastic properties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Grouting, Rheology, and Soil Mechanics · Microbial Applications in Construction Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Flow properties of MK-based geopolymer pastes. A comparative study with standard Portland cement pastes10.1039/c3sm51889b ↗
2. Rheological behavior of alkali-activated metakaolin during geopolymerization10.1016/j.jnoncrysol.2011.07.013 ↗
3. Microstructure development of alkali-activated fly ash cement: a descriptive model10.1016/j.cemconres.2004.08.021 ↗
4. Polymerization in sodium silicate solutions: a fundamental process in geopolymerization technology10.1007/s10853-009-3497-5 ↗
5. Designing precursors for geopolymer cements10.1111/j.1551-2916.2008.02787.x ↗
6. Rheological characterization of fly ash-based suspensions10.1016/j.conbuildmat.2014.04.130 ↗
7. Rheology of geopolymer by OE approach10.1016/j.conbuildmat.2012.04.122 ↗
8. Formulation of caesium based and caesium containing geopolymers
9. Adsorption of superplasticizer admixtures on alkali-activated slag pastes10.1016/j.cemconres.2009.05.005 ↗
10. Observations on the rheological response of alkali activated fly ash suspensions: the role of activator type and concentration10.1007/s00397-014-0793-z ↗
11. Use of oscillatory shear to study flow behavior of fresh cement paste10.1016/0008-8846(93)90092-N ↗
12. In-situ, measurement of viscoelastic properties of fresh cement paste by a microrheology analyzer10.1016/j.cemconres.2015.09.020 ↗
13. Rheometric and ultrasonic investigations of viscoelastic properties of fresh Portland cement pastes10.1016/j.cemconres.2005.08.007 ↗
14. Rheophysics of pastes: a review of microscopic modelling approaches10.1039/b611021p ↗
15. The non-Newtonian rheology of hydrodynamically interacting colloids via active, nonlinear microrheology10.1122/1.4981819 ↗
16. Microrheology of human synovial fluid of arthritis patients studied by diffusing wave spectroscopy10.1002/jbio.201100128 ↗
17. C. Tisserand, M. Fleury, L. Brunel et al. Passive Microrheology for Measurement of the Concentrated Dispersions Stability, UK Colloids 2011 – International Colloid and Surface Science Symposium, 2012, pp. 101–105.10.1007/978-3-642-28974-3_17 ↗
18. Physicochemical stability, microrheological properties and microstructure of lutein emulsions stabilized by multilayer membranes consisting of whey protein isolate, flaxseed gum and chitosan10.1016/j.foodchem.2016.01.052 ↗
19. Microrheology of magnetorheological silicone elastomers during curing process under the presence of magnetic field10.1063/1.5002121 ↗
20. A calorimetric study of early hydration of alkali-slag cements10.1016/0008-8846(95)00126-W ↗
21. Reaction kinetics in sodium silicate powder and liquid activated slag binders evaluated using isothermal calorimetry10.1016/j.tca.2012.07.010 ↗
22. Sodium silicate-based alkali-activated slag mortars: Part II. The retarding effect of additions of sodium chloride or malic acid10.1016/S0008-8846(00)00356-2 ↗
23. Physical basis for the formation and stability of silica nanoparticles in basic solutions of monovalent cations10.1021/la0511384 ↗
24. Influence of slag as additive on compressive strength of fly ash-based geopolymer10.1061/(ASCE)0899-1561(2007)19:6(470) ↗
25. The geopolymerisation of alumino-silicate minerals10.1016/S0301-7516(99)00074-5 ↗
26. X-ray photoelectron spectroscopy of the cement clinker phases tricalcium silicate and β-dicalcium silicate10.1016/S0008-8846(03)00097-8 ↗
27. Monitoring and characterization of creation of geopolymers prepared from fly ash and metakaolin by X-ray photoelectron spectroscopy method10.1002/ep.12068 ↗
28. Transformations of Na, Al, Si and Fe species in red mud during synthesis of one-part geopolymers10.1016/j.cemconres.2017.08.027 ↗
29. XPS and FT-IR investigation of silicate polymers10.1007/s10853-009-3270-9 ↗
30. Structural and chemical properties of thermally treated geopolymer samples10.1016/j.ceramint.2017.02.066 ↗