Preparation of waterproof block by silicate clinker modified FGD gypsum
Source abstract
Abstract
Abstract Silicate clinker was used to modify flue gas desulfurization (FGD) gypsum. Then the effects of the amount and particle size of silicate clinker on the mechanical properties, softening coefficient and water absorption of modified FGD gypsum materials were studied. The results show that adding a proper amount of silicate clinker could improve the water resistance and mechanical properties of FGD gypsum. When 6% of silicate clinker with average particle size of 26.83 μm was added, the dry flexural strength and dry compressive strength of FGD gypsum were 5.4 MPa and 10.7 MPa, respectively, 80% and 15% higher than those of pure FGD gypsum, respectively, and flexural softening coefficient and compressive softening coefficient reached 0.61 and 0.54, 52.5% and 58.8% higher than those of pure FGD gypsum, the water absorption rate was 28.5%, 17% lower than that of pure FGD gypsum. According to the microscopic characterization results, the improvement of the mechanical strength and water resistance of FGD gypsum after the addition of silicate clinker was due to the formation of a high-strength and insoluble C-S-H gel and ettringite on the surface of FGD gypsum crystals.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Magnesium Oxide Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Research state and progress on waterproofing performance of gypsum
2. Retarding effect of impurities on the transformation kinetics of FGD gypsum to α-calcium sulfate hemihydrate under atmospheric and hydrothermal conditions10.1016/j.fuel.2017.04.143 ↗
3. The study on modification of compound inorganic modifier to gypsum
4. Effect of polyacrylic ester emulsion on mechanical properties of macro-defect free desulphurization gypsum plaster10.1016/j.conbuildmat.2017.07.109 ↗
5. Water resistant block from desulfurization gypsum10.1016/j.conbuildmat.2011.07.011 ↗
6. A novel lightweight gypsum composite with diatomite and polypropylene fibers10.1016/j.conbuildmat.2016.03.125 ↗
7. Modification of FDG gypsum for block with SFA water-proofing additive and activated fly ash admixture
8. Preparation and properties of aerated blocks from modified calcined gypsum from flue gas desulfurization
9. Improvement on mechanical strength and water absorption of gypsum modeling material with synthetic polymers10.1016/j.ceramint.2014.06.085 ↗
10. Preparation of waterproof agent of emulsion containing fluorine and silicone (FSE) and its effect on performance of gypsum
11. The influence of silicone on the performance of water resistance of FGD hardened body
12. Influence of synthetic polymers on the mechanical properties of hardened β-calcium sulfate hemihydrate plasters10.1016/j.jiec.2015.10.024 ↗
13. Experimental study on the influence of cement on the performance of FGD gypsum
14. Effect of portland cement on physical and mechanical properties of desulfurized gypsum-based mortar
15. Flue gas desulfurization gypsum and coal fly ash as basic components of prefabricated building materials10.1016/j.wasman.2012.10.022 ↗
16. Evaluation of properties of gypsum plaster-superplasticizer blends of improved performance10.1016/j.jobe.2015.09.012 ↗
17. P. Hajakian, P.W. Reed, Water-resistant gypsum products and methods: US20170107151. 2017.
18. Water-resistant gypsum compositions with man-made modifiers10.1016/j.proeng.2017.02.087 ↗
19. Water resistance property of FGD building gypsum
20. Orthogonal test of modified gypsum by barium chloride and polyvinyl alcohol
21. Hot-pressing process and water resistance properties of desulphurization gypsum modified by phenolic resin
22. Waterproof performance of gypsum modified by silane coupling agent and polyvinyl alcohol
23. Characteristics of acrylic latex-modified and partially epoxy-impregnated gypsum10.1016/S0008-8846(01)00575-0 ↗
24. Investigation into the synergistic effects in hydrated gelling systems containing fly ash, desulfurization gypsum and steel slag10.1016/j.conbuildmat.2018.07.241 ↗
25. The synergistic effect of AFt enhancement and expansion in Portland cement-aluminate cement-FGD gypsum composite cementitious system10.1016/j.conbuildmat.2018.09.139 ↗
26. Effect of Al3+ on crystal morphology and size of calcium sulfate hemihydrate: experimental and molecular dynamics simulation study10.1016/j.jcrysgro.2018.05.013 ↗
27. Hydration of calcium sulfoaluminate cements-experimental findings and thermodynamic modelling10.1016/j.cemconres.2009.08.014 ↗
28. Thermal characterization of a Tunisian gypsum plaster as construction material10.1016/j.egypro.2013.11.070 ↗
29. Microstructure and mechanical properties of β-hemihydrate produced gypsum: an insight from its hydration process10.1016/j.conbuildmat.2010.12.005 ↗
30. Using gypsum to control hydration kinetics of CSA cements10.1016/j.conbuildmat.2017.07.217 ↗
31. Physical and mechanical properties of gypsum-based composites reinforced with PVA and PP fibers10.1016/j.conbuildmat.2017.12.168 ↗
32. Phase-and morphology-controlled crystallization of gypsum by using flue-gas-desulfurization gypsum solid waste10.1016/j.jallcom.2016.03.021 ↗