journal article·2020-02

Multiple-response optimization of open graded friction course reinforced with fibers through CRITIC-WASPAS based on Taguchi methodology

Carlos J. Slebi-Acevedo, Ingrid M. Silva-Rojas, Pedro Lastra-González, Pablo Pascual-Muñoz, Daniel Castro-Fresno

Publisher page

Abstract

Multiple benefits in terms of safety, water quality runoff and noise mitigation have been reported from using Open graded Friction Courses (OGFCs) as wearing course. However, their use is quite limited due to raveling phenomenon. The main objective of this study is to evaluate the functional and mechanical performance of OGFCs reinforced with nylon and polypropylene fibers. To this purpose, a Design of Experiments (DOE) was conducted considering three control factors named as fiber type, binder content and fiber content. Different responses such as total air voids, interconnected air voids, particle loss in dry conditions and particle loss in wet conditions were recorded. In addition, a multi-objective optimization was carried out through the CRITIC-WASPAS methodology. The results showed the effect of adding nylon fibers on the increase of the abrasion resistance in dry and wet conditions. According to the multi-criteria decision-making analysis, the design involving nylon fibers, 4.80% binder content and 0.06% fiber content turned out to be the experimental design better ranked.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Geotechnical Engineering and Soil Stabilization · Tribology and Wear Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (72)

Show source-provided references
1. A review of mix design and evaluation research for permeable friction course mixtures10.1016/j.conbuildmat.2010.09.038 ↗
2. Evaluation of durability tests for permeable friction course mixtures10.1080/10298430902730539 ↗
3. Exploratory study of porous asphalt mixtures with additions of reclaimed tetra pak material10.1016/j.conbuildmat.2017.11.067 ↗
4. Porous asphalt mixture with alternative aggregates and crumb-rubber modified binder at reduced temperature10.1016/j.conbuildmat.2017.06.008 ↗
5. Investigation on high-viscosity asphalt binder for permeable asphalt concrete with waste materials10.1016/j.jclepro.2019.04.010 ↗
6. A. Alvarez, A. Epps Martin, C. Estakhri, J. Button, C. Glover, S. Jung, Synthesis of current practice on the design, construction, and maintenance of porous friction courses, 2006.
7. Evaluation of the benefits of open graded friction course: Case study10.1016/j.conbuildmat.2018.08.185 ↗
8. A review on the development of cool pavements to mitigate urban heat island effect10.1016/j.rser.2015.07.177 ↗
9. Evaluation of experimental testing methods for the design of permeable friction course mixtures10.1016/j.conbuildmat.2019.01.229 ↗
10. Induction healing of asphalt mastic and porous asphalt concrete10.1016/j.conbuildmat.2011.04.016 ↗
11. Numerical modelling of ravelling in porous friction courses (PFC)10.1080/14680629.2016.1269661 ↗
12. Durability of porous asphalt-International experience, Tech. Note 41 Copenhagen, Denmark Danish Road
13. Performance analysis of different type preventive maintenance materials for porous asphalt based on high viscosity modified asphalt10.1016/j.conbuildmat.2018.10.004 ↗
14. A complete laboratory assessment of crumb rubber porous asphalt10.1016/j.conbuildmat.2016.12.016 ↗
15. Investigation into material optimization and development for improved ravelling resistant porous asphalt concrete10.1016/j.matdes.2010.02.026 ↗
16. Study of the feasability of producing modified asphalt bitumens using flakes made from recycled polymers10.1016/j.conbuildmat.2019.02.095 ↗
17. Porous asphalt mixture with 100% recycled concrete aggregate10.1080/14680629.2013.837839 ↗
18. Study of the effect of plasticizer on the structure and surface characteristics of ethylcellulose free films with FT-IR spectroscopy10.1016/j.microc.2013.02.005 ↗
19. Fiber-reinforced asphalt-concrete – areview10.1016/j.conbuildmat.2009.11.009 ↗
20. Mechanical performance of fibers in hot mix asphalt : A review10.1016/j.conbuildmat.2018.12.171 ↗
21. Uniformity and mechanical properties of dense asphalt concrete with steel wool fibers10.1016/j.conbuildmat.2013.01.030 ↗
22. Enhancing mechanical properties of asphalt concrete using synthetic fibers10.1016/j.conbuildmat.2018.05.070 ↗
23. Utilization of waste nylon wire in stone matrix asphalt mixtures10.1016/j.wasman.2018.06.055 ↗
24. Fatigue cracking resistance of fiber-reinforced asphalt concrete10.1177/004051750507500206 ↗
25. Aggressive environmental effect on polypropylene fibre reinforced hot mix asphalt10.1016/j.proeng.2016.08.834 ↗
26. The effect of polypropylene fibers on asphalt performance10.1016/j.buildenv.2007.02.011 ↗
27. Study of the porous asphalt performance with cellulosic fibres10.1016/j.conbuildmat.2016.12.222 ↗
28. A review of recent research on the use of cellulosic fibres, their fibre fabric reinforced cementitious, geo-polymer and polymer composites in civil engineering10.1016/j.compositesb.2016.02.002 ↗
29. Laboratory Assessment of Hybrid Fiber and Nano-silica on Reinforced Porous Asphalt Mixtures10.1016/j.conbuildmat.2017.03.184 ↗
30. Reuse of carbon fiber composite materials in porous hot mix asphalt to enhance strength and durability
31. Optimization of bitumen formulations using mixture design of experiments (MDOE)10.1016/j.conbuildmat.2017.08.146 ↗
32. Determination of optimal mix from the standpoint of short term aging based on asphalt mixture fracture properties using response surface method10.1016/j.conbuildmat.2018.05.078 ↗
33. Application of Taguchi method for compressive strength optimization of tertiary blended self-compacting mortar10.1016/j.conbuildmat.2018.09.165 ↗
34. TOPSIS based Taguchi design optimization for CVD growth of graphene using different carbon sources: Graphene thickness, defectiveness and homogeneity
35. Effect of grading and lime content on HMA stripping using statistical methodology10.1016/j.conbuildmat.2012.02.025 ↗
36. A Taguchi approach for investigating the engineering properties of concretes incorporating barite, colemanite, basaltic pumice and ground blast furnace slag10.1016/j.conbuildmat.2016.12.209 ↗
37. Optimizing pervious concrete pavement mixture design by using the Taguchi method10.1016/j.conbuildmat.2015.10.094 ↗
38. Influence of various parameters on strength and absorption properties of fly ash based geopolymer concrete designed by Taguchi method10.1016/j.conbuildmat.2017.06.066 ↗
39. Optimization of surface roughness and flank wear using the Taguchi method in milling of Hadfield steel with PVD and CVD coated inserts10.1016/j.measurement.2013.12.017 ↗
40. Experimental investigation and optimisation in drilling of GFRP composites10.1016/j.measurement.2011.07.023 ↗
41. Determining the effect of cutting parameters on surface roughness in hard turning using the Taguchi method
42. Probabilistic multi-criteria assessment of renewable micro-generation technologies in households10.1016/j.jclepro.2018.12.051 ↗
43. Hydrogen mobility roll-up site selection using intuitionistic fuzzy sets based WASPAS, COPRAS and EDAS
44. A multi criteria decision making approach for process improvement in friction stir welding of aluminium alloy10.1016/j.measurement.2017.05.023 ↗
45. A multi-criteria decision-making analysis for the selection of fibres aimed at reinforcing asphalt concrete mixtures
46. A TOPSIS-based Taguchi optimization to determine optimal mixture proportions of the high strength self-compacting concrete10.1016/j.chemolab.2013.03.012 ↗
47. Multi-response optimization of polymer blended concrete: A TOPSIS based Taguchi application10.1016/j.conbuildmat.2016.05.027 ↗
48. Minimization of cutting force, temperature and surface roughness through GRA, TOPSIS and Taguchi techniques in end milling of Mg hybrid MMC10.1016/j.measurement.2017.11.011 ↗
49. Multi-response optimization of polymer blended concrete: a TOPSIS based Taguchi application ß ims10.1016/j.conbuildmat.2016.05.027 ↗
50. Optimization of weighted aggregated sum product assessment
51. A systematic review and meta-Analysis of SWARA and WASPAS methods: Theory and applications with recent fuzzy developments10.1016/j.asoc.2017.03.045 ↗
52. Single-measure and multi-measure approach of predictive manufacturing control: A comparative study10.1016/j.cie.2018.12.018 ↗
53. Determining objective weights in multiple criteria problems: the critic method10.1016/0305-0548(94)00059-H ↗
54. Critic and maut methods for the contract manufacturer selection problem10.26417/ejms.v5i1.p93-101 ↗
55. INVIAS, Especificaciones Generales de Construcción de Carreteras y Normas de Ensayo Para Carreteras (2013).
56. Improving cohesiveness of porous friction course (PFC) asphalt mixtures
57. Stormwater quality of spring-summer-fall effluent from three partial-infiltration permeable pavement systems and conventional asphalt pavement10.1016/j.jenvman.2013.11.056 ↗
58. Characterization of interconnectivity, size distribution and uniformity of air voids in porous asphalt concrete using X-ray CT scanning images10.1016/j.conbuildmat.2019.04.056 ↗
59. Determination of volumetric properties for permeable friction course mixtures10.1520/JTE101696 ↗
60. S.-Y. Chang, S.K. Al Bahar, J. Zhao, Advances in Civil engineering and bulting materials, 2012.10.1201/b13165 ↗
61. A comparative study on properties of porous friction course mixes with neat bitumen and modified binders10.1016/j.conbuildmat.2008.08.008 ↗
62. Analysis and evaluation of the performance of porous asphalt. The Spanish experience, ASTM Spec
63. Resistance to degradation or cohesion loss in Cantabro test on specimens of porous asphalt friction courses10.1016/j.sbspro.2014.12.210 ↗
64. Evaluation of water effect on bituminous mastics with different contribution fillers and binders10.1016/j.conbuildmat.2011.08.093 ↗
65. Experimental study of fibers in stabilizing and reinforcing asphalt binder10.1016/j.fuel.2009.08.020 ↗
66. Performance of fiber reinforced asphalt concrete under environmental temperature and water effects10.1016/j.conbuildmat.2010.03.012 ↗
67. Dynamic Properties of fiber-modified overlay mixture10.1177/0361198196154500113 ↗
68. Evaluation of fiber-reinforced asphalt mixtures using advanced material characterization tests, state
69. Experimental study on the effect of basalt and glass fibers on behavior of open-graded friction course asphalt modified with nano-silica10.1016/j.conbuildmat.2019.04.010 ↗
70. Ravelling investigation of porous asphalt concrete based on fatigue characteristics of bitumen-stone adhesion and mortar10.1016/j.matdes.2008.04.031 ↗
71. Multi-response optimisation of micro-milling parameters through GRA, TOPSIS and Taguchi techniques to increase production rate while reducing energy consumption10.1016/j.measurement.2019.04.090 ↗
72. Experimental evaluation of anti stripping additives on porous asphalt mixtures10.11113/jt.v78.9502 ↗