Research on compatibility mechanism of biobased cold-mixed epoxy asphalt binder
Source abstract
Abstract
Abstract Cold-mixed epoxy asphalt (CEA) has attracted increasing attention as a superior steel bridge pavement material for its convenient construction and low energy consumption. In this paper, the compatibility of CEA was improved with incorporating biobased epoxidized soybean oil (ESO), and the micromorphology, dynamic mechanical properties, and mechanical properties were evaluated. The results showed that ESO made asphalt particles disperse uniformly, and decreased the number of the glass transition temperature of the CEA. ESO also increased elongation at break of the CEA. The compatibility mechanism was analyzed according to Fourier transform infrared spectrum and molecular dynamics simulation. The results showed that ESO did not react chemically with asphalt and epoxy monomer. Due to incorporating ESO into CEA, the difference values of cohesion energy densities and solubility parameters between asphalt and epoxy monomer decreased, while the interaction energy of the whole system strengthened.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Polymer composites and self-healing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Z. Qian, C. Chen, C. Jiang, A.d.F. Smit, Development of a lightweight epoxy asphalt mixture for bridge decks, Construct. Build. Mater. 48 (2013) 516-520.10.1016/j.conbuildmat.2013.06.096 ↗
2. Optimization of hard modified asphalt formula for gussasphalt based on uniform experimental design10.1016/j.conbuildmat.2017.01.068 ↗
3. J. Wang, The Application and Optimization Research of Steel Deck SMA Asphalt Pavement, International Conference on Intelligent System Design & Engineering Application, 2011.
4. Thermal, mechanical properties, and low-temperature performance of fibrous nanoclay-reinforced epoxy asphalt composites and their concretes
5. Epoxy asphalt concrete paving on the deck of long-span steel bridges10.1360/02ww0123 ↗
6. Alternate uses of epoxy asphalt on bridge decks and roadways10.1016/j.conbuildmat.2014.12.125 ↗
7. Properties of Biobased Epoxy Resins from Epoxidized Soybean Oil (ESBO) Cured with Maleic Anhydride (MA)10.1007/s11746-012-2102-2 ↗
8. Compatibility and mechanical properties of epoxy resin modified asphalt binders
9. Design, preparation and characterization of novel toughened epoxy asphalt based on a vegetable oil derivative for bridge deck paving10.1039/C4RA07637K ↗
10. Effects of Microwave Curing on the Chemical and Physical Properties of Epoxy Asphalt10.1061/(ASCE)MT.1943-5533.0001645 ↗
11. Microstructures, thermal and mechanical properties of epoxy asphalt binder modified by SBS containing various styrene-butadiene structures10.1617/s11527-018-1217-9 ↗
12. Environmentally Friendly Compatibilizers from Soybean Oil for Ternary Blends of Poly(lactic acid)-PLA, Poly(epsilon-caprolactone)-PCL and Poly(3-hydroxybutyrate)-PHB10.3390/ma10111339 ↗
13. Laboratory Evaluation of Waste Cooking Oil-Based Bioasphalt as an Alternative Binder for Hot Mix Asphalt10.1061/(ASCE)MT.1943-5533.0000713 ↗
14. Mechanical and Abrasive Wear Studies on Biobased Jatropha Oil Cake Incorporated Glass-Epoxy Composites10.1007/s11746-010-1575-0 ↗
15. Synthesis and characterization of cast resin based on different saturation epoxidized soybean oil10.1002/ejlt.200900191 ↗
16. Conversion of oils and fats using advanced mesoporous heterogeneous catalysts10.1007/s11746-006-1179-x ↗
17. Epoxidized soybean oil-based ceramer coatings10.1007/s11746-000-0062-0 ↗
18. Manufacturing and mechanical properties of soy-based composites using pultrusion10.1016/j.compositesa.2003.08.007 ↗
19. Curing kinetics of bio-based epoxy resin based on epoxidized soybean oil and green curing agent10.1002/aic.15486 ↗
20. Modification of novel bio-based resin-epoxidized soybean oil by conventional epoxy resin10.1002/pen.21791 ↗
21. Thermal and Mechanical Properties of Anhydride-Cured Epoxy Resins with Different Contents of Biobased Epoxidized Soybean Oil10.1002/app.33097 ↗
22. Thermal and mechanical properties of epoxy resin toughened with epoxidized soybean oil10.1007/s10973-012-2859-4 ↗
23. Improving the short-term aging resistance of asphalt by addition of crumb rubber radiated by microwave and impregnated in epoxidized soybean oil10.1016/j.conbuildmat.2013.08.067 ↗
24. Synthesis and characterization of bio-based epoxy blends from renewable resource based epoxidized soybean oil as reactive diluent10.1007/s10118-015-1568-4 ↗
25. A review of the fundamentals of polymer-modified asphalts: Asphalt/polymer interactions and principles of compatibility10.1016/j.cis.2015.07.010 ↗
26. Comparative analysis of cold-mixed epoxy and epoxy SBS-modified asphalts: Curing rheology, thermal, and mechanical properties10.1016/j.conbuildmat.2018.05.035 ↗
27. Molecular simulations and experimental evaluation on the curing of epoxy bitumen
28. Curing behavior and mechanical properties of an eco-friendly cold-mixed epoxy asphalt10.1617/s11527-019-1382-5 ↗
29. Curing reaction model of epoxy asphalt binder, Journal of Wuhan University of Technology-Mater
30. Molecular dynamics simulation of physicochemical properties of the asphalt model10.1016/j.fuel.2015.09.045 ↗
31. Study of cohesion and adhesion properties of asphalt concrete with molecular dynamics simulation10.1016/j.commatsci.2015.10.024 ↗
32. Performance characteristics of asphalt materials based on molecular dynamics simulation – A review10.1016/j.conbuildmat.2018.09.038 ↗
33. Approach to the composition dependence of glass transition temperature of compatible polymer blends10.1016/0032-3861(88)90203-0 ↗
34. Rheological behaviors of epoxy asphalt binder in comparison of base asphalt binder and SBS modified asphalt binder10.1016/j.conbuildmat.2014.12.020 ↗
35. Recent applications of viscoelastic damping for noise control in automobiles and commercial airplanes10.1016/S0022-460X(03)00106-8 ↗
36. Organic montmorillonite reinforced epoxy mortar binders10.1016/j.conbuildmat.2016.01.012 ↗
37. Fatigue Damage of Asphalt Pavement on an Orthotropic Bridge Deck
38. Performance of hot mix epoxy asphalt binder and its concrete10.1617/s11527-014-0442-0 ↗
39. Fracture toughness and ductile characteristics of diglycidyl ether of bisphenol-A resins modified with biodegradable epoxidized linseed oil10.1016/j.compositesb.2017.07.047 ↗
40. Dynamic mechanical thermo-analysis of cement and asphalt mortar10.1016/j.powtec.2017.02.058 ↗
41. Curing behavior of epoxy asphalt, Journal of Wuhan University of Technology-Mater
42. Fourier-transform infrared studies of polymer blends. III. Poly(β-propiolactone)-poly(vinyl chloride) system10.1002/pol.1980.180180618 ↗
43. Fourier transform infrared studies of polymer blends. 4. Further observations on the poly(bisphenol A carbonate)-poly(iε-caprolactone) system10.1021/ma50006a040 ↗
44. Mechanism of modulus improvement for epoxy resin matrices: a molecular dynamics simulation10.1016/j.reactfunctpolym.2016.12.014 ↗