journal article·2020-09

Experimental investigation of particle size effect on the self-healing performance of microcapsule for cemented coral sand

Dongsheng Xu, Wei Chen, Xiaochun Fan

Publisher page

Abstract

Abstract The Urea-Formaldehyde (UF) microcapsule with in situ polymerization was fabricated with controlled particles size distributions in order to improve the self-healing efficient of cemented coral sand. The particle size distributions of UF microcapsules were examined by correlating with various rotation speeds during synthesis process. Through the laser particle size analyzer, it shown that the particle sizes of UF/epoxy resin microcapsule ranges from 0 to 650 μm under synthesized at 150–800 rad/min. Under a specific synthesized speed, the particle sizes of microcapsules were followed a normal distribution. Further analysis indicated that there is a linear relationship between the medium particle size of microcapsule and the rotation speed. Compression tests were carried out to investigate the effects of the particle sizes and volume fractions of microcapsules. It found that the optimization particle size distributions and volume fractions of microcapsules for cemented coral sand specimens are 450 rpm and 3% (i.e. microcapsule content with ratio of cement by mass), respectively. The compressive strength of the specimen was increased by approximately 85% with 3% of microcapsules. Based on the micro-analysis, the particle size distribution of the microcapsules at 450 rpm was match well with the pore distribution of the specimen. The microcapsules with particle size greater than 18 μm were broken after compression. Finally, the piezoelectric sensor (PZT) is used to characterize the self-healing efficiency of the microcapsules. The results indicate that the self-healing efficiency of microcapsules synthesized at 450 rad/min with volume fraction of 3% was about 75%. The optical microscope investigation confirmed that the microcapsules can be triggered by the crack or compression of the specimen and react together with the contribution from the healing agent to self-heal the internal cracks.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microbial Applications in Construction Materials · Grouting, Rheology, and Soil Mechanics · Polymer composites and self-healing

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Particle obstruction and crushing of dredged coral soil in the Nansha Islands, South China Sea10.1016/j.enggeo.2019.105274 ↗
2. The geographical characteristics of Nansha Islands in the South China Sea10.1007/s11442-018-1515-8 ↗
3. Geotechnical characterization of the coral sand in northern coast of Egypt10.1016/j.asej.2018.03.008 ↗
4. Dynamic properties of coral and siliceous sands under isotropic and anisotropic stress conditions10.1016/j.sandf.2017.11.010 ↗
5. The Corrosion of Cast Duplex Stainless Steels in Seawater and Sour Brines10.5006/3284 ↗
6. Interpretation of coarse effect in simple shear behavior of binary sand-gravel mixture by DEM with authentic particle shape10.1016/j.conbuildmat.2018.11.059 ↗
7. Cyclic and postcyclic simple shear behavior of binary sand-gravel mixtures with various gravel contents10.1016/j.soildyn.2019.04.030 ↗
8. Macro and micro investigation of gravel content on simple shear behavior of sand-gravel mixture10.1016/j.conbuildmat.2019.06.091 ↗
9. A novel mechanical robust, self-healing and shape memory hydrogel based on PVA reinforced by cellulose nanocrystal
10. Influence of steel fibres on the flexural performance of reinforced concrete beams with lap-spliced bars
11. Application of a capillary crystalline material to enhance cement grout for sealing tunnel leakage10.1016/j.conbuildmat.2019.04.095 ↗
12. A time-release technique for corrosion prevention10.1016/S0008-8846(98)00087-8 ↗
13. Evaluation of self-healing of internal cracks in biomimetic mortar using coda wave interferometry10.1016/j.cemconres.2016.01.006 ↗
14. Self-healing of early age cracks in cement-based materials by mineralization of carbonic anhydrase microorganism
15. Experimental investigation on the smart self - healing composites based on the short hollow glass fibers and shape memory alloy strips10.1002/pc.24953 ↗
16. Approach to self-healing in Metal matrix Composites: A review
17. Stitched shape memory alloy wires enhance damage recovery in self-healing fibre-reinforced polymer composites
18. Investigation of the Self-Healing Behavior of Sn-Bi Metal Matrix Composite Reinforced with NiTi Shape Memory Alloy Strips Under Flexural Loading10.1007/s11837-018-2826-z ↗
19. Fabrication self-recovery bulge textures on TiNi shape memory alloy and its tribological properties in lubricated sliding10.1016/j.triboint.2015.12.011 ↗
20. Microfluidic fabrication of microcapsules tailored for self-healing in cementitious materials10.1016/j.conbuildmat.2018.07.005 ↗
21. Preparation and application of microcapsules containing toluene-di-isocyanate for self-healing of concrete10.1016/j.conbuildmat.2019.01.007 ↗
22. Microfluidic production of aqueous suspensions of gellan-based microcapsules containing hydrophobic compounds
23. Preparation Process of Epoxy Resin Microcapsules for Self - healing Coatings10.1016/j.porgcoat.2019.04.015 ↗
24. Synthesis and characterization of high durable linseed oil-urea formaldehyde micro/nanocapsules and their self-healing behavior in epoxy coating10.1016/j.porgcoat.2018.08.019 ↗
25. Encapsulation of linseed oil and linseed oil based alkyd resin by urea formaldehyde shell for self-healing systems10.1016/j.porgcoat.2018.04.027 ↗
26. Single microcapsules containing epoxy healing agent used for development in the fabrication of cost efficient self-healing epoxy coating10.1016/j.porgcoat.2017.09.019 ↗
27. Microencapsulation of a coconut oil-based alkyd resin into poly(melamine–urea–formaldehyde) as shell for self-healing purposes10.1016/j.porgcoat.2017.05.014 ↗
28. Acoustic characterization of damage and healing of microencapsulation-based self-healing cement matrices10.1016/j.cemconcomp.2017.08.013 ↗
29. Self-healing features in cementitious material with urea–formaldehyde/epoxy microcapsules10.1016/j.conbuildmat.2015.12.140 ↗
30. Preparation and characterization of novel melamine modified poly(urea–formaldehyde) self-repairing microcapsules10.1016/j.colsurfa.2010.09.009 ↗
31. Autonomic healing of polymer composites10.1038/35057232 ↗
32. Effect of microcapsule size on the performance of self-healing polymers10.1016/j.polymer.2007.04.008 ↗
33. First UK field application and performance of microcapsule-based self-healing concrete10.1016/j.conbuildmat.2019.02.178 ↗
34. Performance recovery concerning the permeability of concrete by means of a microcapsule based self-healing system10.1016/j.cemconcomp.2016.12.005 ↗
35. Permeability and pore structure of microcapsule-based self-healing cementitious composite10.1016/j.conbuildmat.2017.12.008 ↗
36. Pervious concrete: Effects of porosity on permeability and strength
37. Selection of physical and chemical properties of natural fibers for predicting soil reinforcement10.1061/(ASCE)MT.1943-5533.0002850 ↗
38. Field experiments on laterally loaded piles for an offshore wind farm
39. Adding ceramic polishing waste as paste substitute to improve sulphate and shrinkage resistances of mortar10.1016/j.powtec.2019.11.117 ↗
40. Early-age shrinkage strain measurements of the graphene oxide modified magnesium potassium phosphate cement10.1016/j.measurement.2019.03.002 ↗
41. Effects of particle sphericity and initial fabric on the shearing behavior of soil–rough structural interface
42. Evaluation of interface shear behavior of GFRP soil nails with a strain-transfer model and distributed fiber-optic sensors10.1016/j.compgeo.2017.10.005 ↗
43. Parametric influence towards size reduction of poly(methylmethacrylate) shelled microcapsule with epoxy core
44. Influence of microcapsule size and shell polarity on thermal and mechanical properties of thermoregulating geopolymer concrete for passive building applications10.1016/j.enconman.2018.02.076 ↗