Effects of modified materials prepared from wastes on the performance of flue gas desulfurization gypsum-based composite wall materials
Source abstract
Abstract
Abstract The utilisation of industrial wastes and straw fibre to prepare building materials is a green alternative that saves natural resources and protects the environment. This study investigates the effect of cement, inorganic wastes, and straw fibre on the properties of flue gas desulfurization (FGD) gypsum. Response surface methodology was adapted to study the mechanical and water resistance properties of the samples. The results indicate that the properties of gypsum-based composites improved upon addition of cement and wastes due to the synergistic effect between them, which resulted in formation of calcium silicate hydrates (C-S-H) and ettringite (AFt). The addition of 3 wt% of sorghum straw fibre (SSF) significantly improved the flexural strength, decreased the apparent density and thermal conductivity of samples at a length to diameter ratio (LDR) of 7.5. The SSF successively treated with alkali, enzyme, and waterproofing agent removed the non-toughening compounds of the fibre, resulting in better mechanical properties and thermal conductivity. This outcome occurred because the non-toughening compounds of SSF, especially protein, pectin, and hemicellulose, negatively impact the studied properties. This work provides a theoretical basis to improve the overall properties and prepare a lightweight high-strength thermal insulation FGD gypsum-based composite for wall materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Geotechnical Engineering and Soil Stabilization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Study on the hygrothermal properties of a Chinese solar greenhouse with a straw block north wall10.1016/j.enbuild.2019.03.040 ↗
2. Light absorption properties of HULIS in primary particulate matter produced by crop straw combustion under different moisture additions and stacking modes10.1016/j.atmosenv.2018.08.038 ↗
3. Construction of compatible interface of straw/magnesia lightweight materials by alkali treatment10.1016/j.conbuildmat.2019.116712 ↗
4. Preparation of waterproof block by silicate clinker modified FGD gypsum10.1016/j.conbuildmat.2019.04.053 ↗
5. Characteristics and speciation of heavy metals in fly ash and FGD gypsum from Chinese coal-fired power plants10.1016/j.fuel.2019.04.055 ↗
6. Recycling of biomass and coal fly ash as cement replacement material and its effect on hydration and carbonation of concrete10.1016/j.wasman.2019.05.044 ↗
7. Changes in rheology and mechanical properties of ultra-high performance concrete with silica fume content10.1016/j.cemconres.2019.105786 ↗
8. Z. Li, S. Dai, B. Ma, F. Liu, X. Zhou, T. Zhang, Effect of steel slag-fly ash-silica fume composite modifier on properties of sulphoaluminate cement, B CHIN CERAM SOC. 39(1) (2020) 175-181.
9. Wear performance of UHMWPE based composites including nano-sized fumed silica10.1016/j.compositesb.2019.106967 ↗
10. Effect of impure components in flue gas desulfurization (FGD) gypsum on the generation of polymorph CaCO3 during carbonation reaction10.1016/j.jhazmat.2019.02.002 ↗
11. Electrical resistivity of fly ash and metakaolin based geopolymers10.1016/j.conbuildmat.2019.117868 ↗
12. Evaluation of the performance of recycled textile fibres in the mechanical behaviour of a gypsum and cork composite material10.1016/j.cemconcomp.2015.01.001 ↗
13. Utilization of thermally treated flue gas desulfurization (FGD) gypsum and class-C Fly Ash (CFA) to prepare CFA-based geopolymer10.1007/s11595-013-0654-0 ↗
14. Thermal stability, chemical speciation and leaching characteristics of hazardous trace elements in FGD gypsum from coal-fired power plants10.1016/j.fuel.2018.05.067 ↗
15. Recycling flue gas desulphurization (FGD) gypsum for removal of Pb(II) and Cd(II) from wastewater10.1016/j.jcis.2015.06.035 ↗
16. Technical feasibility for use of FGD gypsum as an additive setting time retarder for Portland cement10.1016/j.jmrt.2017.08.005 ↗
17. Investigation into the synergistic effects in hydrated gelling systems containing fly ash, desulfurization gypsum and steel slag10.1016/j.conbuildmat.2018.07.241 ↗
18. Study on properties of untreated FGD gypsum-based high-strength building materials10.1016/j.conbuildmat.2017.07.166 ↗
19. Study on Effect of the Ternary Composite Retarder on Properties of FGD Gypsum Plaster Material
20. Fire protection of light and massive timber elements using gypsum plasterboards and wood based panels: a large-scale compartment fire test10.1016/j.conbuildmat.2014.09.027 ↗
21. Dissolution of CaSO4·1/2H2O and precipitation of CaSO4·2H2O: A kinetic study by synchrotron X-ray powder diffraction10.1016/S0008-8846(01)00464-1 ↗
22. Water resistant block from desulfurization gypsum10.1016/j.conbuildmat.2011.07.011 ↗
23. Effect of matrix components with low thermal conductivity and density on performances of cement-EPS/VM insulation mortar10.1007/s10973-016-5718-x ↗
24. Influence of silica fume on properties of fresh and hardened ultra-high performance concrete based on alkali-activated slag10.1016/j.cemconcomp.2019.03.023 ↗
25. Flue gas desulfurization gypsum and coal fly ash as basic components of prefabricated building materials10.1016/j.wasman.2012.10.022 ↗
26. Water resistant blended cements containing flue-gas desulfurization gypsum, Portland cement and fly ash for structural applications10.1016/j.cemconcomp.2019.04.033 ↗
27. JC/T 698-2010. Gypsum blocks. Building Materials Standardization Administration of China, Beijing, China.
28. Cellulase production by Aspergillus fumigatus MS13.1 mutant generated by heavy ion mutagenesis and its efficient saccharification of pretreated sweet sorghum straw10.1016/j.procbio.2019.06.006 ↗
29. Enhancing enzymatic hydrolysis yield of sweet sorghum straw polysaccharides by heavy ion beams irradiation pretreatment10.1016/j.carbpol.2019.114976 ↗
30. Preparation and characterization of fire retardant straw/magnesium cement composites with an organic-inorganic network structure10.1016/j.conbuildmat.2018.03.111 ↗
31. Thermal conductivity of unfired earth bricks reinforced by agricultural wastes with cement and gypsum10.1016/j.enbuild.2015.07.016 ↗
32. Impact of accelerated climatic aging on the behavior of gypsum plaster-straw material for building thermal insulation10.1016/j.conbuildmat.2016.08.120 ↗
33. S. Kim, Incombustibility, physico-mechanical properties and TVOC emission behavior of the gypsum–rice husk boards for wall and ceiling materials for construction, Ind. Crop. Prod. 2009, 29(2-3) (2009) 381-38710.1016/j.indcrop.2008.07.006 ↗
34. Simulation-based robust optimization of limited-stop bus service with vehicle overtaking and dynamics: A response surface methodology10.1016/j.tre.2019.08.012 ↗
35. Rheological and mechanical properties of admixtures modified 3D printing sulphoaluminate cementitious materials10.1016/j.conbuildmat.2018.09.037 ↗
36. Prediction of the size of electroformed giant unilamellar vesicle using response surface methodology10.1016/j.bpc.2019.106217 ↗
37. Antibacterial cotton fibers treated with silver nanoparticles and quaternary ammonium salts10.1016/j.carbpol.2016.06.043 ↗
38. Characterization of silane treated and untreated natural cellulosic fibre from corn stalk waste as potential reinforcement in polymer composites10.1016/j.carbpol.2019.04.088 ↗
39. Experimental investigation on two new corn stalk biocomposites based on magnesium phosphate cement and ordinary Portland cement10.1016/j.conbuildmat.2019.07.100 ↗
40. Activation of gypsum anhydrite-slag mixtures10.1016/0008-8846(95)00018-6 ↗
41. The mechanical and physical properties of compressed earth block stabilized with lime and filled with untreated and alkali-treated date palm fibers10.1016/j.conbuildmat.2015.12.007 ↗
42. M. Chen, L. Li, P. Zhao, S. Wang, L. Lu, Paper sludge functionalization for achieving fiber-reinforced and low thermal conductivity calcium silicate insulating materials, J. Therm. Anal. Calorim. 136(2) (2019) 493-503.10.1007/s10973-018-7682-0 ↗