journal article·2020-11

Insight into the role of polyacrylamide polymer powder on the cracking in plastic period of cement mortar

Haoxin Li, Dayou Ni, Lin Li, Biqin Dong, Qing Chen, Linan Gu

Publisher page

Abstract

Abstract It is still uncertain whether polyacrylamide polymer powder can restrain the cracking of cement mortar in the plastic period and the mechanisms, which are responsible for this role, still need to be systematically clarified. Thus the different contents of the polyacrylamide polymer powder were mixed and various pastes with polyacrylamide were prepared. The cracking behaviors and water evaporation losses of mortars were evaluated. The bleeding percentages, chemical shrinkages, ions concentrations, ultraviolet visible spectra and the characteristics of hydration heat liberations of cement pastes with polyacrylamide polymer powder were investigated to carry out the insight into the role of polyacrylamide polymer powder on the cracking of cement paste in the plastic period. The experimental results indicate that the polyacrylamide polymer powder improves the mortar resistance to the cracking in the plastic period. It decreases the water evaporation loss and bleeding percentage. But it enhances the chemical shrinkage and the increased chemical shrinkage is mainly attributed to the role of polyacrylamide polymer powder on the promotion of cement hydration in the tested ages, especially in the initial fast reaction and the first deceleration periods. The existence of the intermolecular hydrogen bonds is the main reason for lowering the water evaporation loss and bleeding percentages. Acting forces from the intermolecular hydrogen bonds may be additional contributor to the improved resistance to the cracking of cement mortar in the plastic period. The results from this work will provide a reference for the alleviation of the plastic cracking of cement based paste.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Concrete Properties and Behavior · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (63)

Show source-provided references
1. Interaction between settlement and shrinkage cracking in plastic concrete10.1016/j.conbuildmat.2018.07.028 ↗
2. Effect of sodium gluconate on dispersion of polycarboxylate superplasticizer with different grafting density in side chain10.1016/j.jiec.2017.06.032 ↗
3. Utilization of low-quality desulfurized ash from semi-dry flue gas desulfurization by mixing with hemihydrate gypsum10.1016/j.fuel.2019.115783 ↗
4. Characteristics analysis of self-luminescent cement-based composite materials with self-cleaning effect10.1016/j.jclepro.2019.03.291 ↗
5. On the action of capillary pressure in fresh concrete10.1016/0008-8846(76)90050-8 ↗
6. Creep, shrinkage and cracking of restrained concrete at Early Age
7. Influence of freeze-thaw cycles on capillary absorption and chloride penetration into concrete10.1016/j.cemconres.2017.05.018 ↗
8. Performance and ITZ of pervious concrete modified by vinyl acetate and ethylene copolymer dispersible powder10.1016/j.conbuildmat.2019.117532 ↗
9. Leakage behavior of toxic substances of naphthalene sulfonate-formaldehyde condensation from cement based materials10.1016/j.jenvman.2019.109934 ↗
10. Performance of passive methods in plastic shrinkage cracking mitigation10.1016/j.cemconcomp.2018.05.008 ↗
11. Application of neutron imaging to investigate fundamental aspects of durability of cement-based materials: A review10.1016/j.cemconres.2018.03.003 ↗
12. Dynamic mechanical analysis of cement mortar prepared with recycled cathode ray tube (CRT) glass as fine aggregate10.1016/j.jclepro.2017.11.057 ↗
13. Mechanical strength and flexural parameters analysis of micro-steel, polyvinyl and basalt fibre reinforced magnesium phosphate cement mortars
14. Influence of vibration-induced segregation on mechanical property and chloride ion permeability of concrete with variable rheological performance10.1016/j.conbuildmat.2018.11.019 ↗
15. Reaction-degree-based multi-scale predictions for the effective properties of ultra-high-performance concrete
16. Experimental investigation on the durability performances of concrete using cathode ray tube glass as fine aggregate under chloride ion penetration or sulfate attack10.1016/j.conbuildmat.2017.12.135 ↗
17. Utilization of waste cathode ray tube funnel glass for ultra-high performance concrete
18. Upcycling carbon dioxide to improve mechanical strength of portland cement10.1016/j.jclepro.2018.06.120 ↗
19. Effects of adhesives on properties and mechanism of the ultra-thin pavement
20. Investigation on the poor fluidity of electrically conductive cement-graphite paste: Experiment and simulation10.1016/j.matdes.2019.107679 ↗
21. Strength enhancement of recycled aggregate pervious concrete using a cement paste redistribution method10.1016/j.cemconres.2019.05.004 ↗
22. Use of flax fibres to reduce plastic shrinkage cracking in concrete10.1016/j.cemconcomp.2008.09.003 ↗
23. Recycling of raw rice husk to manufacture magnesium oxysulfate cement based lightweight building materials10.1016/j.jclepro.2018.04.238 ↗
24. Experimental research on magnesium phosphate cements modified by red mud10.1016/j.conbuildmat.2019.117131 ↗
25. Effects of nano-SiO2 on early strength and microstructure of steam-cured high volume fly ash cement system10.1016/j.conbuildmat.2018.10.214 ↗
26. The role of fly ash microsphere in the microstructure and macroscopic properties of high-strength concrete10.1016/j.cemconcomp.2017.07.021 ↗
27. Strength development of solidified dredged sludge containing humic acid with cement, lime and nano-SiO210.1016/j.conbuildmat.2019.116971 ↗
28. Effect of placement temperature and curing method on plastic shrinkage of plain and pozzolanic cement concretes under hot weather10.1016/j.conbuildmat.2017.07.068 ↗
29. Effect of carbonation curing regime on strength and microstructure of Portland cement paste10.1016/j.jcou.2019.05.034 ↗
30. Effect of pulverized fuel ash, ground granulated blast-furnace slag and CO2 curing on performance of magnesium oxysulfate cement10.1016/j.conbuildmat.2019.116990 ↗
31. Mathematical modeling of accelerated carbonation curing of Portland cement paste at early age10.1016/j.cemconres.2019.03.025 ↗
32. How carbonation curing influences calcium leaching of portland cement paste: Mechanism and mathematical modeling10.1111/jace.16684 ↗
33. Comparative study between natural and PVA fibers to reduce plastic shrinkage cracking in cement-based composite10.1016/j.conbuildmat.2015.05.028 ↗
34. Influence of basalt fibres on free and restrained plastic shrinkage10.1016/j.cemconcomp.2016.10.004 ↗
35. Influence of polypropylene fiber geometry on plastic shrinkage cracking in concrete10.1016/j.cemconres.2006.01.010 ↗
36. Improvement effect of fiber alignment on resistance to elevated temperature of ultra-high performance concrete10.1016/j.compositesb.2019.107454 ↗
37. Lightweight aggregate as internal curing agent to limit concrete shrinkage
38. Impact of admixtures on the plastic shrinkage cracking of self-compacting concrete10.1016/j.cemconcomp.2013.11.002 ↗
39. Influence of shrinkage-reducing admixtures on plastic and long-term shrinkage10.1016/j.cemconcomp.2010.10.006 ↗
40. Influence of shrinkage-reducing admixtures on the reduction of plastic shrinkage cracking in concrete10.1016/j.cemconres.2008.11.011 ↗
41. Influence of shrinkage-reducing agent and polypropylene fiber on shrinkage of ceramsite concrete10.1016/j.conbuildmat.2017.10.064 ↗
42. Interactions between shrinkage reducing admixtures (SRA) and cement paste's pore solution10.1016/j.cemconres.2007.12.005 ↗
43. Superabsorbent polymers to mitigate plastic drying shrinkage in a cement paste as studied by NMR10.1016/j.cemconcomp.2018.06.019 ↗
44. Belie, Effect of high amounts of superabsorbent polymers and additional water on the workability, microstructure and strength of mortars with a water-to-cement ratio of 0.5010.1016/j.conbuildmat.2014.09.012 ↗
45. a powerful method to determine time-dependent moisture distributions in concrete10.1016/j.nucengdes.2011.02.031 ↗
46. The influence of superabsorbent polymers on the autogenous shrinkage properties of cement pastes with supplementary cementitious materials10.1016/j.cemconres.2015.03.020 ↗
47. Preparation for micro-lithium slag via wet grinding and its application as accelerator in portland cement
48. Utilization of lithium slag by wet-grinding process to improve the early strength of sulphoaluminate cement paste10.1016/j.jclepro.2018.09.027 ↗
49. Compressive strength and hydration process of wet-grinded granulated blast-furnace slag activated by sodium sulfate and sodium carbonate10.1016/j.cemconcomp.2019.01.012 ↗
50. Study on the performance of a new type of water–repellentadmixture for cement mortar10.1016/j.cemconres.2004.02.019 ↗
51. Effect of polyacrylamide on the different properties of cement and mortar10.1016/j.msea.2004.08.050 ↗
52. Micromechanical analysis of polyacrylamide-modified concrete for improving strengths10.1016/j.msea.2008.01.026 ↗
53. Viscosity-enhancing admixtures for cement-based materials—an overview10.1016/S0958-9465(98)80006-1 ↗
54. Assessment and mechanism study of bleeding process in cement paste by 1H low-field NMR10.1016/j.conbuildmat.2015.09.062 ↗
55. Magnetic vortex core-shell Fe3O4@C nanorings with enhanced microwave absorption performance10.1016/j.carbon.2019.10.030 ↗
56. Anodic voltage dependence of Ti-6Al-4V substrates and hydroxyapatite coating10.1166/jnn.2019.16530 ↗
57. Influence of the incorporation of recycled coarse aggregate on water absorption and chloride penetration into concrete10.1016/j.conbuildmat.2019.117845 ↗
58. Effect of polyacrylamide on rheology of fresh cement pastes10.1016/j.cemconres.2015.05.012 ↗
59. Differences between their influences of TEA and TEA·HCl on the properties of cement paste10.1016/j.conbuildmat.2019.117797 ↗
60. Effect and characterization of the nucleation C-S-H seed on the reactivity of granulated blast furnace slag powder10.1016/j.conbuildmat.2019.117726 ↗
61. J. Bensted, P. Barnes, Structure and Performances of Cements, second edition: Spon press, 2002.
62. Advances in understanding hydration of portland cement10.1016/j.cemconres.2015.05.025 ↗
63. Effect of aluminum sulfate on the hydration of portland cement, tricalcium silicate and tricalcium aluminate10.1016/j.conbuildmat.2019.117179 ↗