journal article·2021-02Open access

Flexural toughness of sustainable ECC with high-volume substitution of cement and silica sand

Kâzim Turk, Moncef L. Nehdi

Abstract

This study explores the effects of high-content fly ash and limestone filler partial replacement for portland cement and silica sand, respectively on the flexural toughness parameters of engineered cementitious composites (ECC). Various groups of mixtures having variable fly ash/portland cement ratio and different levels of limestone filler were prepared. ASTM C1609, JSCE-SF4 and the Post-Crack Strength method were employed to appraise the flexural toughness parameters of the ECC mixtures at 3, 28 and 90-d. The results show that according to ASTM C1609, JSCE-SF4 and the Post-Crack Strength method, limestone filler did not significantly affect the flexural toughness, while the flexural toughness of ECC beams decreased when the fly ash content increased. Considering deflection capacity, specimens made with a FA/OPC ratio of 1.2 without limestone filler achieved higher ductility at all curing ages. Owing to its superior crack resistance and toughness compared to normal concrete, ECC with high fly ash content and limestone filler could be a sustainable alternative construction material in diverse civil engineering applications. ECC with enhanced ductility compared to normal concrete could offer increased crack resistance, durability and better resilience.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Structural Behavior of Reinforced Concrete

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. A.W. Dhawale, Joshi V. P., Engineered Cementitious Composites for Structural Applications, in: 2013: pp. 198–205. www.ijaiem.org (accessed June 2, 2020).
2. T. Li, Victor C., Kanda, INNOVATIONS FORUM: Engineered Cementitious Composites for Structural Applications | Journal of Materials in Civil Engineering | Vol 10, No 2, J. Mater. Civ. Eng. 10 (1998) 66–69. https://ascelibrary.org/doi/10.1061/%28ASCE%290899-1561%281998%2910%3A2%2866%29 (accessed June 6, 2020).10.1061/(ASCE)0899-1561(1998)10:2(66) ↗
3. S. Wang, Micromechanics based matrix design for engineered cementitious composites, 2005. http://proquest.umi.com/pqdweb?did=994237291&Fmt=7&clientId=36305&RQT=309&VName=PQD (accessed June 2, 2020).
4. Workability, strength and flexural toughness properties of hybrid steel fiber reinforced SCC with high-volume fiber10.1016/j.conbuildmat.2020.120944 ↗
5. Engineered cementitious composites with high-volume fly ash
6. The role of calcium carbonate in cement hydration10.1016/j.cemconres.2006.10.013 ↗
7. Portland-limestone cements. Their properties and hydration compared to those of other composite cements10.1016/j.cemconcomp.2004.02.006 ↗
8. The mechanical properties of engineered cementitious composites containing limestone powder replaced by microsilica sand10.1139/cjce-2012-0281 ↗
9. ASTM Stand. · 1997 · 04 · 7
10. JSCE, Test method for bending strength and bending toughness of steel fiber reinforced concrete. Standard Specification for Concrete Structures, Test Methods and Specifications, 2005. https://barchip.com/wp-content/uploads/2016/08/JSCE-SF4-Method-of-Test-For-Flexural-Strength-and-Flexural-Toughness.pdf.
11. C.C. Test, T. Drilled, C. Concrete, S.T. Panels, C 1609/C 1609M-05 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading) 1, Astm. i (2005) 1–8. https://doi.org/10.1520/C1609.
12. Toughness characterization of steel fiber-reinforced concrete by JSCE approach10.1016/S0008-8846(00)00212-X ↗
13. Development of Ultra-High Performance Fibre Reinforced Concrete (UHPFRC): Towards an efficient utilization of binders and fibres10.1016/j.conbuildmat.2015.01.050 ↗
14. Comparative flexural behavior of four fiber reinforced cementitious composites10.1016/j.cemconcomp.2008.08.002 ↗
15. Test methods for flexural toughness characterization of fiber reinforced concrete: some concerns and a proposition
16. Annu. B. ASTM Stand. · 2010 · 3
17. Interface tailoring for strain-hardening polyvinyl alcohol-engineered cementitious composite (PVA-ECC)
18. Eco-mechanical index for structural concrete10.1016/j.conbuildmat.2013.12.090 ↗
19. Study of two concrete mix-design strategies to reach carbon mitigation objectives10.1016/j.cemconcomp.2009.04.001 ↗
20. A.P. Fantilli, F. Tondolo, B. Chiaia, G. Habert, Designing reinforced concrete beams containing supplementary cementitious materials, Materials (Basel). 12 (2019). https://doi.org/10.3390/ma12081248.10.3390/ma12081248 ↗
21. Investigation on flexural toughness evaluation method of steel fiber reinforced lightweight aggregate concrete10.1016/j.conbuildmat.2016.11.101 ↗
22. Flexural response of hybrid fiber-reinforced cementitious composites
23. Toughness enhancement in steel fiber reinforced concrete through fiber hybridization10.1016/j.cemconres.2007.05.005 ↗
24. Effect of limestone powder on the rheological, mechanical and durability properties of ECC10.1080/19648189.2016.1150902 ↗
25. Development of engineered cementitious composites with limestone powder and blast furnace slag10.1617/s11527-009-9549-0 ↗
26. Limestone as a retarder and filler in limestone blended cement
27. Limestone-filled pozzolanic cement10.1016/S0008-8846(00)00402-6 ↗
28. On Engineered Cementitious Composites (ECC)10.3151/jact.1.215 ↗
29. Optimization of the use of lightweight aggregates in carbon fiber reinforced cement
30. Effect of shrinkage reducing admixture on flexural behaviors of fiber reinforced cementitious composites10.1016/j.cemconcomp.2011.12.004 ↗