Mechanical and microstructural properties of recycled concretes mixed with ceramic recycled cement and secondary recycled aggregates. A viable option for future concrete
Source abstract
Abstract
[EN] The concept of construction and demolition waste (CDW) embodies a vast amount of residues, among which the ceramic materials (mainly, bricks and tiles) are an important part as, in many countries of the European Union, they represent more than 50% of the total. Therefore, the reutilization of this type of waste is one of the most important challenges faced by the construction sector within the circular economy paradigm. This research work deals with a dual reutilization of the CDW ceramic fraction: firstly, as coarse recycled aggregates and, secondly, through the use of clay brick powder as a pozzolanic addition to the cement. Thus, two different recycled concrete mixtures were produced: (1) with a 50% partial substitution of the natural coarse aggregates (RC-RA) and (2) with a 50% substitution of the natural coarse aggregates and a 25% substitution of the ordinary Portland cement (RC-RAC). The mechanical performance (consistency, density and compressive strength) and microstructural properties such as porosity, elemental mapping analysis, hydration products and interfacial transition zones (ITZ) were assessed and compared with a control concrete (CC). It was revealed that the recycled concretes incorporating ceramic as secondary materials have a comparable performance level to the one exhibited by the conventional concrete at 28 days, in part due to their pozzolanic characteristics but also due to a lower effective w/c ratio, which demonstrates their potential for reuse and possible contribution to the circular economy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Recycled Aggregate Concrete Performance · Innovations in Concrete and Construction Materials · Municipal Solid Waste Management
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (84)
Show source-provided references
1. EBC, Annual report 2018-2019 of the European Building Confederation, European Building Confederation, Brussels, Belgium., 2019.
2. EEA, Effectiveness of Environmental Taxes and Charges for Managing Sand, Gravel and Rock Extraction in Selected EU Countries, European Environment Agency, Copenhagen, Denmark, 2008.
3. UNEP, Sand, rarer than one thinks, UNEP Global Environmental Alert Service, 2014. http://na.unep.net/geas/archive/pdfs/GEAS_Mar2014_Sand_Mining.pdf.
4. Eurostat, European Statistics. Statistical Office of the European Communities (2020). https://ec.europa.eu/eurostat/data/database.
5. Mechanical behaviour of non-structural concrete made with recycled ceramic aggregates10.1016/j.cemconcomp.2004.07.005 ↗
6. Commission · 2015
7. Properties of plain concrete made with mixed recycled coarse aggregate10.1016/j.conbuildmat.2012.07.045 ↗
8. Concrete with mixed recycled aggregates: Influence of the type of cement10.1016/j.conbuildmat.2012.02.092 ↗
9. Properties of high performance concrete made with recycled fine ceramic and coarse mixed aggregates10.1016/j.conbuildmat.2014.07.016 ↗
10. Influence of mixed recycled aggregate on the physical – mechanical properties of recycled concrete10.1016/j.jclepro.2014.01.002 ↗
11. Effect of mixed recycled aggregates on mechanical properties of recycled concrete10.1680/macr.14.00217 ↗
12. The incorporation of construction and demolition wastes as recycled mixed aggregates in non-structural concrete precast pieces10.1016/j.jclepro.2016.03.137 ↗
13. Influence of the amount of mixed recycled aggregates on the properties of concrete for non-structural use10.1016/j.conbuildmat.2011.06.073 ↗
14. Mechanical properties of brick aggregate concrete10.1016/j.conbuildmat.2008.07.023 ↗
15. Reusing ceramic wastes in concrete10.1016/j.conbuildmat.2009.10.023 ↗
16. Durability of recycled concrete made with recycled ceramic sanitary ware aggregate. Inter-indicator relationships10.1016/j.conbuildmat.2015.12.176 ↗
17. Microstructure and properties of recycled concretes using ceramic sanitary ware industry waste as coarse aggregate10.1016/j.conbuildmat.2011.12.075 ↗
18. Effects of using recycled concrete aggregates on the shrinkage of high performance concrete10.1016/j.conbuildmat.2016.04.031 ↗
19. Green concrete production with ceramic wastes and laterite10.1016/j.conbuildmat.2016.04.108 ↗
20. Suitability of mortars produced using laterite and ceramic wastes: Mechanical and microscale analysis10.1016/j.conbuildmat.2017.05.031 ↗
21. Microstructural characteristics, porosity and strength development in ceramic-laterized concrete10.1016/j.cemconcomp.2017.11.017 ↗
22. Mechanical performance of concrete made with aggregates from construction and demolition waste recycling plants10.1016/j.jclepro.2015.03.012 ↗
23. Effect of the constituents (asphalt, clay materials, floating particles and fines) of construction and demolition waste on the properties of recycled concretes10.1016/j.conbuildmat.2014.12.070 ↗
24. Influence of amount of recycled coarse aggregates and production process on properties of recycled aggregate concrete10.1016/j.cemconres.2007.02.002 ↗
25. Investigación sobre la actividad puzolánica de materiales de desecho procedentes de arcilla cocida10.3989/mc.2001.v51.i261.379 ↗
26. Potential for use of crushed waste calcined-clay brick as a supplementary cementitious material in Brazil10.1016/j.cemconres.2007.06.005 ↗
27. Properties and performances of concrete tiles containing waste fired clay materials10.1111/j.1551-2916.2007.01944.x ↗
28. Performance of ground clay bricks as partial cement replacement in grade 30 concrete
29. Use of waste brick as a partial replacement of cement in mortar10.1016/j.wasman.2009.03.026 ↗
30. Effects of waste bricks powder of gachsaran company as a pozzolanic material in concrete
31. Influence of ground waste clay brick on properties of fresh and hardened concrete10.1016/j.conbuildmat.2015.08.100 ↗
32. Structural properties of concrete containing ground waste clay brick powder as partial substitute for cement10.4028/www.scientific.net/MSF.866.63 ↗
33. The role of sintered clay brick powder during the hydration process of cement pastes10.1007/s40996-017-0049-0 ↗
34. Performance evaluation of cement mortars modified with metakaolin or ground brick10.1016/j.conbuildmat.2008.08.027 ↗
35. Use of ground clay brick as a pozzolanic material in concrete10.1520/JAI101681 ↗
36. Mechanical, durability and hygrothermal properties of concrete produced using Portland cement-ceramic powder blends10.1002/suco.201500029 ↗
37. Characterization of ceramic roof tile wastes as pozzolanic admixture10.1016/j.wasman.2008.10.019 ↗
38. Reusing ceramic tile polishing waste in paving block manufacturing10.1016/j.jclepro.2015.06.142 ↗
39. Ceramic tiles waste as replacement material in Portland cement10.1680/jadcr.15.00021 ↗
40. Morphology and properties in blended cements with ceramic wastes as a Pozzolanic material10.1111/j.1551-2916.2006.01279.x ↗
41. Durability of blended cement pastes containing ceramic waste as a Pozzolanic addition10.1111/jace.12882 ↗
42. Ceramic waste powder an alternative cement replacement – characterization and evaluation
43. Mineralogy and microstructure of hydrated phases during the Pozzolanic reaction in the sanitary ware waste/Ca(OH)2 system10.1111/jace.13939 ↗
44. Characterization of ceramic-based construction and demolition waste: use as Pozzolan in cements10.1111/jace.14437 ↗
45. Study on the pozzolanic reaction of clay brick powder in blended cement pastes10.1016/j.conbuildmat.2019.03.307 ↗
46. Utilization of crushed clay brick in concrete industry10.1016/j.aej.2013.12.003 ↗
47. Mix design of concrete with recycled clay-brick-powder using the orthogonal design method10.1016/j.conbuildmat.2012.01.002 ↗
48. Pore size distribution and compressive strength of waste clay brick mortar10.1016/S0958-9465(00)00070-6 ↗
49. Mechanical properties of concretes with recycled aggregates and waste brick powder as cement replacement10.1016/j.proeng.2017.01.396 ↗
50. Inclusion of construction and demolition waste as a coarse aggregate and a cement addition in structural concrete design10.1016/j.acme.2019.08.004 ↗
51. EN 197-1, Cement – Part 1: Composition, specifications and conformity criteria for common cements, CEN, Belgium, Brussels, 2011
52. Asensio de Lucas · 2015
53. Use of clay-based construction and demolition waste as additions in the design of new low and very low heat of hydration cements10.1617/s11527-018-1226-8 ↗
54. Clay-based construction and demolition waste as a pozzolanic addition in blended cements. Effect on sulfate resistance10.1016/j.conbuildmat.2016.10.047 ↗
55. New additions for eco-efficient cement design. Impact on calorimetric behaviour and comparison of test methods10.1617/s11527-016-0809-5 ↗
56. EN 933-11, Tests for geometrical properties of aggregates - Part 11: Classification test for the constituents of coarse recycled aggregate, CEN, Belgium, Brussels, 2009
57. EN 196-2, Method of testing cement - Part 2: Chemical analysis of cement, CEN, Belgium, Brussels, 2013
58. EN 196-3, Methods of testing cement - Part 3: Determination of setting times and soundness, CEN, Belgium, Brussels, 2016
59. EN 12620+A1, Aggregates for concrete, CEN, Belgium, Brussels, 2008
60. EN 933-1, Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method, CEN, Belgium, Brussels, 2012
61. UNE 146406, Determination of content, maximum size and thick aggregate granulometric modulus in fresh concrete., AENOR, Madrid, Spain, 2018
62. EHE-08, Code on Structural Concrete (EHE-08), Spanish Ministry of Public Works, Madrid, 2008.
63. UNE 146121, Aggregates for concrete Specifications for aggregates for concrete for structural concrete elements 2000 AENOR, Madrid, Spain
64. EN 1097-6, Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption, CEN, Belgium, Brussels, 2013.
65. EN 933-3, Tests for geometrical properties of aggregates - Part 3: Determination of particle shape - Flakiness index, CEN, Belgium, Brussels, 2012
66. EN 1097-2, Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation, CEN, Belgium, Brussels, 2010.
67. Improvement of mechanical properties of recycled aggregate concrete basing on a new combination method between recycled aggregate and natural aggregate10.1016/j.conbuildmat.2017.05.084 ↗
68. Bond behavior between deformed steel bars and recycled aggregate concrete after freeze-thaw cycles10.1016/j.conbuildmat.2019.117236 ↗
69. EN-12350-2, Testing Fresh Concrete. Part 2: Slump-test, CEN, Belgium, Brussels, 2009.
70. EN-12350-3, Testing fresh concrete - Part 3: Vebe test, CEN, Belgium, Brussels, 2009.
71. EN 12390-7, Testing hardened concrete - Part 7: Density of hardened concrete, CEN, Belgium, Brussels, 2009
72. EN 12390-1, Testing hardened concrete. Part 1: Shape, dimensions and other requirements for specimens and moulds., CEN, Belgium, Brussels, 2000.
73. EN, En 12390-4:2000. Testing hardened concrete - Part 4: Compressive strength - specification for testing machines, En 12390-4:2000. (2000) 1–18
74. EN, EN 12390-3/AC:2011. Testing hardened concrete - Part 3: Compressive strength of test specimens, CEN, 2011.
75. EN, EN 12390-1:2012. Testing hardened concrete - Part 1: Shape, dimensions and other requirements for specimens and moulds, CEN, 2012
76. Effect of cement addition on the properties of recycled concretes to reach control concretes strengths10.1016/j.jclepro.2014.05.053 ↗
77. F.M. Lea, P.C. Hewlett, M. Liska, Lea’s chemistry of cement and concrete, 2019. http://search.ebscohost.com/login.aspx?direct=true&scope=site&db=nlebk&db=nlabk&AN=1214615 (accessed July 18, 2019).
78. EN 1992-1-1:2004/AC, Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings, CEN, Brussels, Belgium, 2010.
79. Strength gain mechanisms of blended-cements containing marble powder and brick powder10.1007/s12205-014-0557-4 ↗
80. Porosity of recycled concrete with substitution of recycled concrete aggregate: an experimental study10.1016/S0008-8846(02)00795-0 ↗
81. Porosity, pore size distribution and in situ strength of concrete10.1016/S0008-8846(02)00942-0 ↗
82. High performance concrete incorporating ceramic waste powder as large partial replacement of Portland cement10.1016/j.conbuildmat.2017.03.115 ↗
83. Effects of contaminants on the properties of concrete paving blocks prepared with recycled concrete aggregates10.1016/j.conbuildmat.2005.06.031 ↗
84. Use of wastes derived from earthquakes for the production of concrete masonry partition wall blocks10.1016/j.wasman.2011.04.010 ↗