journal article·2015-10

Effect of crumb rubber on viscosity of rubberized asphalt binders containing wax additives

Hyun Hwan Kim, Soon-Jae Lee

Publisher page

Abstract

Abstract Viscous properties of rubberized asphalt binders containing wax additive were evaluated through the rotational viscometer at 135 °C and 120 °C. Rubberized binders were produced with three percentages (10%, 15%, and 20% by the weight of binder), and then mixed with two commercial wax additives. Three different periods of 30, 120, and 240 min were applied to the rotational viscosity test to evaluate the viscous properties depending on testing time. The viscosity changes by different time periods were drawn in time versus viscosity curve. From the results, it is concluded that (1) the addition of crumb rubber significantly increases the binder viscosity, (2) the wax additives are effective to reduce the binder viscosities at both testing temperatures, (3) all the viscosity values of rubberized binders are observed to increase after certain time, regardless of the addition of wax additives, (4) the higher the rubber contents, the steeper the viscosity change over time, and (5) the rubberized mixes with wax additive are expected to have a better haul management, based on the less viscosity increase over time.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. High temperature properties of rubberized binders containing warm asphalt additives10.1016/j.conbuildmat.2007.10.010 ↗
2. Effect of crumb rubber modifiers (CRM) on performance related properties of asphalt binders
3. J.W. Button, C. Estakhri, A. Wimsatt, A synthesis of warm-mix asphalt, Technical Report, Texas Transportation Institute, Report No. FHWA/TX-07/05597-1, 2007.
4. J. D’Angelo, E. Harm, J. Bartoszek, G. Baumgardner, M. Corrigan, J. Cowsert, T. Harman, M. Jamshidi, W. Jones, D. Newcomb, B. Prowell, R. Sines, B. Yeaton, Warm-mix asphalt: European practice International technology scanning program, Federal Highway Administration, FHWA-PL-08-007, 5–10, 2008.
5. T. Gandhi, S. Amirkhanian, Laboratory investigation of warm asphalt binder properties – a preliminary investigation, in: Proc., MAIREPAV5, vol. 5, Park City, Utah, 2007, pp. 475–480.
6. Louisiana experience with crumb rubber-modified hot-mix asphalt pavement10.3141/1789-01 ↗
7. G. Hurley, B. Prowell, Evaluation of Aspha-Min® for use in Warm Mix Asphalt, NCAT Report 05-04, Auburn, 2005.
8. G. Hurley, B. Prowell, Evaluation of Evotherm® for use in Warm Mix Asphalt, NCAT Report 06-02, Auburn, 2006.
9. Quantification of oxidative aging of polymer-modified asphalt mixes made with warm mix technologies journal of materials in civil engineering
10. Short-term aging characterization of asphalt binder using gel permeation chromatography and selected superpave binder tests
11. Laboratory study of the effects of compaction on the volumetric and rutting properties of CRM asphalt mixtures10.1061/(ASCE)0899-1561(2007)19:12(1079) ↗
12. S.-J. Lee, S. Amirkhanian, K. Shatanawi, Effects of crumb rubber on aging of asphalt binders, Asphalt rubber 2006, vol. 3, California, Palm Springs, 2006, pp. 779–95.
13. S.-J. Lee, Characterization of recycled aged CRM binders, Dissertation (Ph.D.), Clemson University, 2007.
14. Viscosity characteristics of rubber-modified asphalts10.1061/(ASCE)0899-1561(1996)8:3(153) ↗
15. R.L. Ott, M. Longnecker, An introduction to statistical methods and data analysis, fifth ed. Pacific Grove, CA, Duxbury, 2001.
16. B.J. Putman, Qualification of the effects of crumb rubber in CRM binder, Dissertation (Ph.D.), Clemson University, 2005.
17. F.L. Roberts, P.S. Kandhal, E.R. Vrown, R.L. Dunning, Investigation and evaluation of ground tire rubber in hot mix asphalt, Nat. Ctr. for Asphalt Technology, Auburn University, Auburn University, Alaska, 1989.
18. Rubber Manufacturers Association · 2009
19. B.E. Ruth, R. Roque, Crumb rubber modifier (CRM) in asphalt pavements, in: Proc., Transportation Congress, 1995, pp. 768–785.
20. Sasol Wax, Accessed from .
21. Recycling of laboratory-prepared RAP mixtures containing crumb rubber modified binders in HMA10.1177/0361198106196200109 ↗
22. T.S. Shuler, R.D. Pavlovich, J.A. Epps, C.K. Adams, Investigation of material and structural properties of asphalt-rubber paving mixtures, vol. I, Tech. Rep, U.S. Dept. of Transportation. Res. Board, Washington, D.C., 1985.
23. Recycling tires in rubber asphalt paving yields cost, Disposal benefits
24. The Asphalt Institute, Performance graded asphalt binder specification and testing, SP-1, The Asphalt Institute, Lexington, 2003.
25. F.P. Xiao, Development of fatigue predictive models of rubberized asphalt concrete (RAC) containing reclaimed asphalt pavement (RAP) mixtures, Dissertation (Ph.D.), Clemson University, 2006.