Predictions of long-term deflection of geopolymer concrete beams
Source abstract
Abstract
The long-term behaviour of concrete beams constructed with geopolymer concrete (GPC) is investigated. Self-weight and sustained load of 1 kPa are applied on top of the beams at the age of 14 days to simulate construction conditions. Creep tests on cylinders conducted with sustained loading commenced at the ages of 14 days and 28 days. The results from creep tests on GPC show higher creep in the specimens loaded at 14 days than those loaded at 28 days. Predictions of beam deflections are performed by using RCM, EMM and AEMM with input parameters of properties of GPC from experimental data, including elastic modulus, modulus of rupture, creep and shrinkage. These property tests show that GPC can achieve sufficient strength for structural designs, but both compressive strength and flexural tensile strength are affected by drying, which causes differential drying shrinkage and microcracking at the drying surfaces. The predicted deflections by these analysis methods are compared with the experimental results from beams, and show that RCM gives the worse performance of the three methods. The investigation concludes that the AEMM can be used for long-term deflection calculations for GPC beams with minor parameter modifications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Concrete Properties and Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Neville · 1997
2. A life-cycle assessment of Portland cement manufacturing: comparing the traditional process with alternative technologies10.1016/j.jclepro.2008.04.007 ↗
3. Alkali activated ground granulated blast-furnace slag concrete: preliminary investigation10.1016/0008-8846(91)90036-H ↗
4. Geopolymers – inorganic polymeric new materials10.1007/BF01912193 ↗
5. The role of inorganic polymer technology in the development of ‘green concrete’10.1016/j.cemconres.2007.08.018 ↗
6. Workability and mechanical properties of alkali activated slag concrete10.1016/S0008-8846(98)00236-1 ↗
7. Fire-resistant geopolymer produce by granulated blast furnace slag10.1016/S0892-6875(03)00008-6 ↗
8. Sulfate attack on alkali-activated slag concrete10.1016/S0008-8846(01)00659-7 ↗
9. Byfors K, et al. Durability of concrete made with alkali activated slag. In: Malhotra VM, editor, 3rd international conference proceedings. Fly ash, silica fume, slag, and natural pozzolans in concrete. Trondheim, Norway; 1989. p. 1429–66.
10. Influence of fly ash on the water and chloride permeability of alkali-activated slag mortars and concretes10.1016/j.conbuildmat.2013.07.106 ↗
11. On the development of fly ash-based geopolymer concrete
12. Long-term deflection of RC beams containing GGBFS10.1680/macr.13.00080 ↗
13. Test research on prestressed beam of inorganic polymer concrete
14. Standards Australia. AS3972-2010: general purpose and blended cements. Sydney; 2010.
15. Standards Australia. AS1012.16-1996: methods of testing concrete – determination of creep of concrete cylinders in compression. Sydney; 1996.
16. Standards Australia. AS1012.13-1992: methods of testing concrete – determination of the drying shrinkage of concrete for samples prepared in the field or in the laboratory. Sydney; 1992.
17. Standards Australia. AS1012.11-2000: methods of testing concrete – determination of the modulus of rupture. Sydney; 2000.
18. Untersuchungen über die knicksicherheit, die elastische verformung und das kriechen des betons bei bogenbrücken
19. Rüsch · 1983
20. Implications of the superposition principle in creep and relaxation problems for concrete and prestressed concrete
21. Prediction of concrete creep effects using age-adjusted effective modulus method
22. Approximate relaxation function for concrete10.1061/JSDEAG.0005318 ↗
23. Improved estimation of long-term relaxation function from compliance function of aging concrete
24. Gilbert · 2011
25. British Standards Institution. BS EN 1992-1-1:2004: Eurocode 2: design of concrete structures – part 1–1: general rules and rules for buildings. London; 2004.
26. Microcracking and strength development of alkali activated slag concrete10.1016/S0958-9465(01)00003-8 ↗
27. Strength and shrinkage properties of alkali-activated slag concrete placed into a large column10.1016/S0008-8846(99)00011-3 ↗
28. Properties and durability of alkali-activated slag concrete
29. Standards Australia. AS3600-2009: concrete structures. Sydney; 2009.
30. MgO content of slag controls phase evolution and structural changes induced by accelerated carbonation in alkali-activated binders10.1016/j.cemconres.2013.12.003 ↗
31. Generalized structural description of calcium–sodium aluminosilicate hydrate gels: the cross-linked substituted tobermorite model10.1021/la4000473 ↗
32. Shrinkage, cracking and deflection – the serviceability of concrete structures
33. Analysis of microcracking induced by differential drying shrinkage10.1016/j.cemconcomp.2008.06.015 ↗
34. The influence of age at time of loading on basic and drying creep10.1016/0008-8846(73)90100-2 ↗
35. The calcium silicate hydrates10.1016/j.cemconres.2007.11.005 ↗
36. Effect of pore size distribution on drying shrinking of alkali-activated slag concrete10.1016/S0008-8846(00)00327-6 ↗
37. Influence of key parameters on drying shrinkage of cementitious materials10.1016/S0008-8846(99)00156-8 ↗
38. Theory of creep and shrinkage in concrete structures: a precis of recent developments