journal article·2003-02

The use of advanced polymer composites to form an economic structural unit

J Hulatt, L Hollaway, A Thorne

Publisher page

Abstract

Abstract An advanced polymer/continuous fibre composite (APC) and concrete system is an example in which two very dissimilar materials can be joined to form a composite structure. In the current investigation a duplex beam will be analysed where the high-compressive strength concrete is placed above, and the high strength and stiffness fibre/polymer composite is placed below the neutral axis; in this form the two materials will be used to their best advantage. When this structural duplex Tee beam is under load, two failure criteria of the system have been identified. These are the failure of the shear bond between the APC permanent shuttering and the concrete, and failure by buckling of the composite web of the beam. The experimental test results show that the shear bond is not critical. Buckling occurs in the specified panels at 20% of the ultimate load. On increasing the load, the beam continues to perform conventionally and fails in the concrete by crushing. In addition, the paper shows that the performance of the APCs are not impaired by long-term creep and fatigue loading whilst the concrete element shows a typical reduction in stiffness for these types of loading regimes.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials · Structural Response to Dynamic Loads

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Garden HN, Hollaway LC. An experimental study of the strengthening of reinforced concrete beams using prestressed carbon composite plates. Proceedings of 7th International Conference on Structural Faults and Repair. University of Edinburgh, July 8–10th 1997; 2:191–99
2. Norris T, Saadatmanesh H, Ehsani MR. Shear and flexural strengthening of R/C beams with carbon fiber sheets. J Struct Eng July 1997. pp. 903–1110.1061/(ASCE)0733-9445(1997)123:7(903) ↗
3. Garden H. The Novel Use of Advanced Composite Materials in Civil Engineering Infrastructure. Proceedings of 2nd International Conference on Piping and Infrastructure. University of Newcastle 10th–11th April 2001
4. Reinforced Plastics. Composites make hospital quake safe. October 2000. p. 1110.1016/S0034-3617(00)80028-4 ↗
5. Design and installation of fiber-reinforced polymer composite bridge10.1061/(ASCE)1090-0268(2000)4:1(33) ↗
6. A composite sketch
7. Stacey M, Voysey P, Potts A, Corden T, Garden H. Development of a Prototype Modular Railway Canopy using Advanced Composites. Proceedings of the Conference on Composites and Plastics in Construction, BRE, Nov. 16–18th 1999, Paper 28
8. Triantafillou TC, Meier U. Innovative design of FRP combined with concrete. Proceedings on the Conference of Advanced Composites in Bridges and Structures 1992, pp. 491–98
9. ABAQUS. Version 5.8, Hibbitt, Karlsson & Sorensen, Inc, Pawtucket, RI, 1998
10. MSC/PATRAN. Version 2000, MacNeil-Schwendler Co., 2000
11. Hulatt J, Hollaway L, Thorne A. Characteristics of Composite Concrete Beams. Proceedings of Conference of Bridge Management 4—Inspection, maintenance, assessment and repair. Thomas Telford, London, 2000, pp. 483–91
12. Hulatt J, Hollaway L, Thorne A. Short term testing of a hybrid T-beam made from a new prepreg material, Submitted to ASCE – J Composites Construct (June 2001)
13. An investigation of the composite action of an FRP/concrete prismatic beam’10.1016/S0950-0618(99)00050-1 ↗
14. ASTM D3039M. Standard test method for tensile properties of polymer matrix composite materials. 1995a; 15.03: 99–109
15. ASTM D3518M. Standard test method for in-plane shear response of polymer matrix composite materials by tensile test of a ±45° laminate. 1994; 15.03: 139–45
16. ASTM D4255. Standard guide for testing in-plane shear properties of composite laminates. 1983—reapproved 1994; 15.03: 195–204
17. Gere JM, Timoshenko SP. Mechanics of Materials, Third Edition. PWS-KENT, 199010.1007/978-1-4899-3124-5 ↗
18. Beeby AW, Narayanan RS. Designer's Handbook to Eurocode 2 Part 1.1: Design of concrete structures. Thomas Telford, 1995
19. Neville · 1995
20. Mosley · 1996