journal article·2015-03Open access

Maturity method to predict the evolution of the properties of sprayed concrete

Isaac Galobardes, Sergio H. Cavalaro, Chris I. Goodier, Simon Austin, Ángel Rueda

Abstract

The maturity method provides a simple approach for assessing the strength evolution of concrete. Although it is already used in the precast industry, no reported applications with sprayed concrete may be found in the literature. Such concrete presents singular characteristics due to the spraying process and, in some cases, due to the introduction of accelerators that modify the kinetics of cement hydration. Consequently, the traditional equations that relate the evolution of mechanical properties and the maturity index might not apply in this case. The objective of this study is to adapt the maturity method to sprayed concrete. An experimental program was conducted with 24 concrete mixes sprayed in laboratory and tested for the evolution of temperature and compressive strength. An alternative equation was proposed to relate the maturity index and the mechanical properties. Subsequently, finite element models were developed to generalize the maturity curves considering the local design parameters.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Concrete Properties and Behavior · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Carino NJ, Lew HS, The maturity method from theory to application. Proceedings of Structures Congres & Expositions; 2001.10.1061/40558(2001)17 ↗
2. Early-age properties, strength development and heat of hydration of concrete containing various South African slags at different replacement ratios10.1016/j.conbuildmat.2011.06.018 ↗
3. Early age properties of high-strength/high-performance concrete
4. Using the maturity method in concrete cracking control at early ages10.1016/S0958-9465(03)00080-5 ↗
5. Sprayed concrete – advanced technologies
6. The use of wet mix sprayed concrete
7. European Committee for Standardization. EN 14488-2:2007 ‘Testing sprayed concrete – Part 2: Compressive strength of young sprayed concrete’; 2007.
8. Austin · 1996
9. Effect of some admixtures on the setting time and strength evolution of cement pastes at early ages10.1016/j.conbuildmat.2006.05.043 ↗
10. Thermal behavior of cement matrix with high-volume mineral admixtures at early hydration age10.1016/j.cemconres.2006.07.002 ↗
11. Maturity and the strength of concrete
12. Estimating early-age in situ strength development of concrete slabs10.1016/j.conbuildmat.2011.10.019 ↗
13. Julliand, P, Early Hydration of Cementitious Systems. [PhD Thesis]. ÉCOLE POLYTECHNIQUE FÉDÉRALE DE LAUSANNE; 2009.
14. Galobardes I, Characterization and control of wet mix sprayed concrete with accelerators. [PhD Thesis]. ETSCCP. Universitat Politècnica de Catalunya; 2013.
15. Carslaw · 1959
16. ‘Los cementos de adición en España del año, 2000 al 2005’
17. Sustainable cement production – present and future10.1016/j.cemconres.2011.03.019 ↗
18. Research on effect of limestone and gypsum on C3A, C3S and PC clinker system10.1016/j.conbuildmat.2007.06.013 ↗
19. Galobardes I. ‘Estudio relativo a la caracterización de aditivos acelerantes para hormigón proyectado por vía húmeda’ [Minor Thesis]. Universitat Politècnica de Catalunya. Barcelona Tech.; 2009.
20. Galobardes I. ‘Caracterización de aditivos acelerantes utilizados en proyección de hormigón por vía húmeda’ [Master Thesis]. Universitat Politècnica de Catalunya. Barcelona Tech.; 2010.
21. Melbye T, Dimmock R, Garshol KF, ‘Sprayed concrete for Rock support’ Copyright MBT International Underground Construction Group, Division of MBT (Switzerland) Ltd., 9th edition; 2001.
22. Estimation of the modulus of elasticity for sprayed concrete10.1016/j.conbuildmat.2013.11.046 ↗
23. European Committee for Standarization. ‘EN 14487-1:2008 ‘Sprayed concrete – Part 1: Definitions, specifications and conformity’; 2008.
24. Concrete technology
25. Austrian Society for Construction Technology. Guidelines for Sprayed Concrete; 1992.