journal article·2014-03

Experimental studies on strength and ductility of CFRP jacketed reinforced concrete beam-column joints

Varinder Singh, Prem Pal Bansal, Maneek Kumar, S.K. Kaushik

Publisher page

Abstract

Abstract Beam-column joints in reinforced concrete (RC) framed structures are recognized as most vulnerable structural element subjected to lateral loads. The use of various jacketing techniques for strengthening or retrofitting the existing structural components is very frequent. In the present work, the effect on the strength of beam-column joints initially stressed to three different stress levels, retrofitted with CFRP jackets has been presented. A total of 9 RC beam-column joints were tested under static loading conditions. CFRP strengthening has been carried out for beam-column joints already stressed to three different stress levels. The jackets have been provided in L-shape and at 45° orientation to the joint in two layers. The results show improvement in the ultimate load carrying capacity (7–12%) of the retrofitted beams, when compared to the control beams along with an increase of 15% in yield load for each of such exterior beam- column joints. Stiffness up to the first crack load was 17.36% and 26.94% more for stress level-2 and stress level-3 as compared to stress level-1.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Structural Load-Bearing Analysis · Structural Response to Dynamic Loads

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Strengthening of reinforced concrete frame connection rehabilitation by jacketing
2. Rehabilitation reinforced concrete frame connections using corrugated steel jacketing
3. Gergely I, Pantelides CP, Reaveley LD. Shear strengthening of bridge joints with carbon fiber composites. In: Proceedings of sixth US national conference on earthquake engineering. WA: EERI Seattle; 1998.
4. FRPC reinforced concrete beam-column joints under cyclic excitation10.1016/j.compstruct.2004.08.022 ↗
5. Retrofit of RC bridge pier with CFRP advanced composites
6. Seismic rehabilitation of deficient exterior concrete frame joints
7. Flexural behavior of reinforced concrete beams externally strengthened with CFRP sheets bonded with an inorganic matrix
8. Behavior of full-scale reinforced concrete beams retrofitted for shear and flexural with FRP laminates10.1016/S1359-8368(00)00023-8 ↗
9. Experimental investigation of FRP strengthened RC beam-column joints10.1061/(ASCE)1090-0268(2003)7:1(39) ↗
10. Strengthening and rehabilitation of RC beam-column joints using carbon FRP jacketing and epoxy resin injection10.1002/eqe.785 ↗
11. On the shear deformation theories for the analysis of concrete shells reinforced with external composite laminates10.1023/A:1023706410615 ↗
12. Khalifa A, Tumialan G, Nanni A, Belarbi A. Shear strengthening of continuous RC beams using externally bonded CFRP sheets. ACI. In: Proceedings of the 4th international symposium on FRP for reinforcement of concrete struct, Baltimore, MD; November 1999. p. 995–1008.
13. Reinforced concrete rectangular beams strengthened with CFRP laminates10.1016/1359-8368(95)00044-5 ↗
14. Rehabilitation of rectangular simply supported RC beams with shear deficiencies using CFRP composites
15. Strengthening of RC beams in flexure and shear using CFRP laminate
16. D’Ayala D, Penford A, Valentini S. Use of FRP fabric for strengthening of reinforced concrete beam-column joints. In: 10th Int conference on structural faults and repair. London: July 2003.
17. Karunasena W, Hardeo P, Bosnich G. Rehabilitation of concrete beams by externally bonding fiber composite reinforcement. In composite systems: macrocomposites, microcomposites, nanocomposites. In: Proceedings of the ACUN-4, international composites conference, 4th, Sydney, Australia, July 21–25 2002. p. 222–26.
18. IS: 10262-1982, Recommended guidelines for concrete mix design, Bureau of Indian Standards, New Delhi.
19. IS: 456-2000, Indian standard plain and reinforced concrete code of practice, Bureau of Indian Standards, New Delhi.
20. IS: 1489 (Part 1)-1991, Portland-Pozzolana Cement specification Part 1, Fly Ash Based, Bureau of Indian Standards, New Delhi.
21. IS: 383-1970, Specification for coarse and fine aggregates from natural sources for concrete, Bureau of Indian Standards, New Delhi.